Custom Pedals For MFG Crosswind by SF3DPrint

Last crawled date: 3 years ago

These are custom pedals for the excellent MFG Crosswind flight simulation rudder pedals. I needed a narrower stance than possible with their adapter set but with that narrower stance came the need to clearance the pedals themselves to clear the rudder mechanism. Instead of cutting up the stock pedals, I came up with these with the retro NAA logo. Overall width at the pedals is 15.5".
The heels and toes bolt on with 1/4"-28 x 1.25" socket head cap screws. Seems very sturdy. I sized the adapters for the metric bolts and nuts that come with the factory adapters. If you have those you're set. I don't know the actual size but they are close to 1/4-20 and take a 5mm Allen hex key, The bolts that hold the adapters to the rudder mechanism are 30 mm shaft length and the ones that hold the pedals to the adapters are 25 mm. The nuts are 10 mm.
I printed the main pedal bodies face up but the heels and toes face down to print with no support. You need two short adapters, two toes and one each right and left pedal and right and left heel.
Added 11/13/2020 - did a slight rework on the right and left heel pieces to make them longer and add a small foot rest. RLongwRest.stl and LLongwRest.stl substitute for PedalHeelRight.stl and PedalHeelLeft.stl.