IKEA Volfgang 2020 profile mount by neugy

Last crawled date: 3 years, 1 month ago

This is an universal 2020 profile mount for the Ikea Volfgang chair.
I added mounts for the left and the right side (left or right is part of the model name).
So you will need print at least 4 parts (excluding the nuts).
Two for the front side and two for the backside.
The 2020 profile needs to be at least 300 mm long (in the most up position) and it need to be longer if you want to fix the mount lower.
Moreover you will need (for a single side):
4x ISO 7380-1 M5x10 screws
4x M5 Nuts
2x DIN 125A M5 washers
4x M5x40 bolts
4x M5-Nuts for the 2020 profile
Other screws/bolts/nuts may fit, too. I just used the things I found at home.
I used the washers for the M5X10 screws in the solts.