Thingiverse
Pen Caddy by mrcaland
by Thingiverse
Last crawled date: 2 years, 10 months ago
edited changed legs to print 4 each legs. 1 each top and bottom.
item is large 180.5mm x 144.8mm x 93mm,
individual squares are about 15.5mm.
should not need supports. legs are designed with 0.1mm to each side clearance should be ok for sliding fit. if not scale x and y - up or dn as desired.
my slicer says 8 hours for top tray at 0.24 layer height 10% infill, and 11 hours for bottom tray.
item is large 180.5mm x 144.8mm x 93mm,
individual squares are about 15.5mm.
should not need supports. legs are designed with 0.1mm to each side clearance should be ok for sliding fit. if not scale x and y - up or dn as desired.
my slicer says 8 hours for top tray at 0.24 layer height 10% infill, and 11 hours for bottom tray.
Similar models
thingiverse
free
9-bin Parts Tray for Craftsman Top Chest by fluffygryphon
...easurements of a single tray is as follows:
135mm x 135mm x 61.5mm
two should fit snug in the drawer as shown in the photograph.
thingiverse
free
2x Laptop or mobile phone repair screw sorting trays by Sagittario
...screw you remove goes in the tray in a similar position to the place the screw was removed from,...
thingiverse
free
Magnetic board game bits trays by jameson42
...l due to a mating chamfer on top and bottom. the chamfers are 45 degrees, and should generally be printable without any supports.
thingiverse
free
1862 RailsOnBoards Token and Setup Tray
...t;d x 1/4" magnets for the trays and steel for the lids
lids are printed with no top or bottom layers and 10-15% grid infill
3dwarehouse
free
scanner tray
...scanner tray
3dwarehouse
both old top and bottom trays
thingiverse
free
Mini Hydroponic Planter
...ir is full, it will come out of the side hole that protects from over filling.
put a little plant food in the top soil as needed.
thingiverse
free
275mm_tray by pyearick
...65mm tray. i use two strips of 1 in 3m vhb tape on the top and bottom of the back to attach the tray to the back of a vanity door
grabcad
free
Sustainapack Concept
...ation.
...
thanks totommy mueller for the compact switch file!
https://grabcad.com/library/challenge-helper-item-sustainapack-1
thingiverse
free
Tawantinsuyu boardgame organizer by tvkili
...t.
made goods tray on a larger scale as wanted upgraded goods tokens to fit easily. it could be remixed easily to a smaller size.
thingiverse
free
Seed Planters with Water Tray
...l see planting setup. each cell is ~33mm x 33mm and sits in a shallow tray that can be filled with water for bottom up watering.
Mrcaland
thingiverse
free
Violin and Bow hanger by mrcaland
...violin and bow hanger by mrcaland
thingiverse
holds a violin (fitted with shoulder rest), and a bow.
thingiverse
free
yet another iphone holder by mrcaland
...yet another iphone holder by mrcaland
thingiverse
just not enough of these already
thingiverse
free
Mavic Samsung Note8 with Otterbox holder by mrcaland
...mavic samsung note8 with otterbox holder by mrcaland
thingiverse
adjusted to fit note 8
thingiverse
free
'T' Holddown Clamps by mrcaland
...ywood 1 each upper and lower parts. glue, clamp, enjoy. sized with 20, 35, and 50mm long slots. the slot width is for an m6 screw
thingiverse
free
Collet and Nut holder for Precise Bits (Think & Tinker) by mrcaland
...der for precise bits (think & tinker) by mrcaland
thingiverse
box for collet and nut from precise bits (think & tinker).
thingiverse
free
DJI Mavic Prop Box 6x by mrcaland
...zed to fit the prop only if the prop is folded so the third locking tab is oriented the same direction as the blades of the prop.
Caddy
turbosquid
$10
scissor caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$89
Volkswagen Caddy 2011
... real car base. model is created accurately, in real units of measurement, qualitatively and maximally close to the original. ...
3d_export
$3
bath caddy tray for tub
...bath caddy tray for tub
3dexport
bath caddy tray for tub
turbosquid
$25
Chashaku and Tea caddy
...alty free 3d model chashaku and tea caddy for download as max on turbosquid: 3d models for games, architecture, videos. (1197555)
3d_export
$99
Volkswagen Caddy 2011 3D Model
...addy van 2011 2012 2013 2014 pickup commercial cab suv minivan mpv bus vw
volkswagen caddy 2011 3d model humster3d 39333 3dexport
turbosquid
$10
Wood Garden Caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Oblivion Tool Caddy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$37
VW caddy TDI3d model
...vw caddy tdi3d model
cgstudio
.max - vw caddy tdi 3d model, royalty free license available, instant download after purchase.
cg_studio
$37
VW caddy SDI3d model
...man car vehicles vehicle transport
.max - vw caddy sdi 3d model, royalty free license available, instant download after purchase.
3d_export
$39
Volkswagen Caddy 2021 wheel
...volkswagen caddy 2021 wheel
3dexport
Pen
3d_export
free
pen-
...pen-
3dexport
files - pen - pen with cap files - pen1 - pen without cap
3d_ocean
$8
Pen
...f a refill pen , all parts are modeled separately , material applied , and rendered with mental-ray. easily editable layered file
3d_export
$5
pen
...pen
3dexport
pen
3ddd
$1
Wacom Pen and Pen Stand
...wacom pen and pen stand
3ddd
wacom
wacom pen and pen stand
3d_export
$5
pen
...pen
3dexport
ball pen, two sizes of the ballpoint pen model - large and normal
archibase_planet
free
Pens
...pens
archibase planet
pens pen writing-materials
pens set n271114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$5
pen
...pen
3dexport
metal pen, 4 textures 4096x4096, cycles render
3d_ocean
$4
Pen
...pen
3docean
3d models miscellaneous pen
3d models, miscellaneous
3d_export
$5
pen
...pen
3dexport
simple pen in corona render. make in 2018 max version.
design_connected
$13
Pen
...pen
designconnected
sollos pen computer generated 3d model. designed by almeida, jader.