Thingiverse
Mini Hydroponic Planter
by Thingiverse
Last crawled date: 4 years, 3 months ago
Pack dirt into the three inset columns that reach the bottom of the bottom reservoir.
Remove any excess dirt that gets into the bottom reservoir (the water reservoir).
Place the tray into the mid-pot. It should stop about half way in on the ledges and at the level of the dirt columns.
Place dirt on top of the tray in the top half of the pot. The dirt from the inset columns should contact the dirt on top of the tray. Do not pack the dirt to tightly above the tray. Try to minimize the amount of dirt that gets into the water reservoir.
Plant the plant.
Fill the water reservoir from the fill tube that is at the level of the top of the dirt. When the reservoir is full, it will come out of the side hole that protects from over filling.
Put a little plant food in the top soil as needed.
Remove any excess dirt that gets into the bottom reservoir (the water reservoir).
Place the tray into the mid-pot. It should stop about half way in on the ledges and at the level of the dirt columns.
Place dirt on top of the tray in the top half of the pot. The dirt from the inset columns should contact the dirt on top of the tray. Do not pack the dirt to tightly above the tray. Try to minimize the amount of dirt that gets into the water reservoir.
Plant the plant.
Fill the water reservoir from the fill tube that is at the level of the top of the dirt. When the reservoir is full, it will come out of the side hole that protects from over filling.
Put a little plant food in the top soil as needed.
Similar models
thingiverse
free
Planter with Reservoir by 3DPrinterMaster66
...p has the dirt and plant with holes in the bottom large enough for water to get in but small enough that dirt won't fall out.
thingiverse
free
Minimalist Self watering Planter by rikesh_dhirajlal
...e sure you place some small rocks first before you place the soil, this will help keep the water storage tank at the bottom clean
thingiverse
free
Self-Watering Plant Pot (Small) by Floris2003
...floris2003
thingiverse
this is a plant pot with a water reservoir.
fill the plant pot with water 0.4 inch past the plant holder.
cg_trader
$3
Self-watering planter small | 3D
...r small | 3d
cg trader
this is a plant pot with a water reservoir.
fill the plant pot with water 0.4 inch past the plant holder.
thingiverse
free
Seedling Pot
...the center.
step 5:
fill it up to the mark and water it. place it where it gets a lot of light and the temperatures are moderate.
thingiverse
free
Self watering plant pot by CarrotyLemons
...h these types of these pots) currently the largest parts also take up 140mm^3 space but i imagine there is some room for scaling.
thingiverse
free
Self-watering Pot (Mark 2) by harik_klar
... with water (via the spout on the side).
customize to your heart's content using the "customizer" button the right.
thingiverse
free
Self watering ikea pot by AxelTB
...giverse
a simple retro-fitted pot with water reservoir for an ikea vase.
with floating water level indicator and filling funnel.
thingiverse
free
Plant Pot half cut
...plant pot half cut
thingiverse
plant pot
sphere cut the top
little hole on the bottom for water fluids
170mm wide x 180mm height
thingiverse
free
Self Watering plant pot holder by teneopreto
...oles at the bottom, ir its a thick clay pot put a piece of cotton cloth in the hole so it sucks the water into the dirft properly
Hydroponic
turbosquid
$3
H2Gro Hydroponic Planter
...ty free 3d model h2gro hydroponic planter for download as stl on turbosquid: 3d models for games, architecture, videos. (1479664)
3d_export
$15
hydroponic stand
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
3d_export
free
Zephyrus Hydroponic Air Purifier
...ze the air of any remaining microbes before it exits the front exhaust port. the entire system is controlled by a raspberry pi 4.
3d_export
$10
Glass Fishbowl Bowl Hydroponics Plant SET
...painter available for all software<br>ue4. ue5. blender. maya. 3d max. unity. c4d.<br>formats: .obj .gltf .fbx .blend
3d_export
$19
Glass hydroponic vase 01
... x 9.59" x 18.57"<br>- model parts: 6<br>- material count: 3<br>- xform: yes<br>- boxtrick: yes
3d_export
$19
Glass hydroponic vase 02
... x 4.44" x 16.26"<br>- model parts: 4<br>- material count: 3<br>- xform: yes<br>- boxtrick: yes
thingiverse
free
Hydroponic
...hydroponic
thingiverse
hydroponic
free3d
$10
HYDROPONIC SYSTEM
...hydroponic system
free3d
hydroponic system
thingiverse
free
hydroponic vase
...hydroponic vase
thingiverse
hydroponic pot
thingiverse
free
Hydroponic Pot
...hydroponic pot
thingiverse
pot for hydroponic growing
Planter
3ddd
$1
Etsy Planter
...r
3ddd
planter , plants , vase
etsy planter set
3d_export
$5
drawing of planter
...drawing of planter
3dexport
drawing of planter
3d_export
$10
planter
...planter
3dexport
turbosquid
$6
Planters
...alty free 3d model planters for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502150)
3d_export
$5
batmobile planter
...batmobile planter
3dexport
batmobile planter 3d model
3ddd
$1
Planter Lamp
...planter lamp
3ddd
planter lamp : 103,765 polygons
turbosquid
$45
Planter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Planter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
planter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Planter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model