USB and battery voltage monitor holder for BMW F650GS by nhadjinikolov

Last crawled date: 3 years, 1 month ago

This is a voltage monitor and dual usb socket holder for mounting on the ignition key.
It was designed for the cheap ebay motorcycle accessories as USB sockets, 12V sockets, battery monitors... They need a little less than a 30mm diameter mounting hole.
It was printed out of PETG @ 245 degrees C and spray painted black.
I wanted to test it a few kilometers before putting it here. I will update if it goes under any modifications.
For final assembly you will need a M6x20(or if you use a nylon insert nut - M6x25) bolt with a hex cylindrical head and a M6 nut.
It is designed for bolts and nuts according to DIN 912 for the bolt and DIN 985 for the nut.
Edit:
After 4000 km no problems yet :)