Thingiverse
PSE USB mount for SimLab Vertical by RCHeliGuy
by Thingiverse
Last crawled date: 3 years, 4 months ago
This is a two piece DIN USB mount for a Precision Sim Engineering Wheel through a SimLab Vertical mount without the cable touching the opening.
it has a front face that attaches to the rear section with the USB mount.
It may be compatible with other round DIN designs. The M3 bolt holes are on a 20mm OC square pattern. and the center clearance is about 21mm.
The two halves are bolted together using 7x M3x16 socket head screws and square nuts.
The square holes are pressure fit require needle nose pliers to press into place. An ice pick or very small screwdriver can help to center the nuts.
The USB mount takes 4 x M3x20mm bolts and locknuts to secure the DIN face
it has a front face that attaches to the rear section with the USB mount.
It may be compatible with other round DIN designs. The M3 bolt holes are on a 20mm OC square pattern. and the center clearance is about 21mm.
The two halves are bolted together using 7x M3x16 socket head screws and square nuts.
The square holes are pressure fit require needle nose pliers to press into place. An ice pick or very small screwdriver can help to center the nuts.
The USB mount takes 4 x M3x20mm bolts and locknuts to secure the DIN face
Similar models
thingiverse
free
SimLab Vertical Mount Facia USB Mount by RCHeliGuy
... or very small screwdriver can help to center the nuts.
the usb mount takes 4 x m3x20mm bolts and locknuts to secure the din face
thingiverse
free
SimLab PSE USB DIN mount by RCHeliGuy
...n takes 4 x m3x20mm bolts and locknuts to secure the din face as well as 2 x m8 x 30mm bolts to secure it to the upright profile.
thingiverse
free
Simlab vertical Fairings by RCHeliGuy
...thingiverse
something to dress up the plate that holds the vertical profile in place
requires one m8x16 bolt and t-nut to mount.
thingiverse
free
Heusinkveld handbrake USB controller box mount
...sb controller for a heusinkveld handbrake to 40 series profile.
mounting hole is for m6 bolt/t-nut, two channels for cable ties.
thingiverse
free
Tool to hold 3 MM Bolt Nuts in place - i3 style frame by AnyWorldGames
...tch mounts. the center bar holds the tool the correct distance to line up the holes. it is mirrored for both sides of the frame.
thingiverse
free
Optic Post Mounts by docphoton
...ry mounting location to the table.
slot on the side for 10-24 nut and hole fit 10-24 bolt to tighten the bolt onto the steel rod.
thingiverse
free
USB Buck Converter case with mounting holes by cheesy498
...usb buck converter case with mounting holes by cheesy498
thingiverse
added two holes to allow for m3 bolts to attach to frame
thingiverse
free
pi camera holder mount base by bwilber
... t-nut for the center hole for the base. you will need to drill two small holes in the pi mount and supply two bolts for it also.
thingiverse
free
USB and battery voltage monitor holder for BMW F650GS by nhadjinikolov
...is designed for bolts and nuts according to din 912 for the bolt and din 985 for the nut.
edit:
after 4000 km no problems yet :)
thingiverse
free
Universal Pole Mount 1 inch by OilFilter
...)
4 smaller holes around center are 3mm and can be used with bolts or pegs to provide things mounted to it purchase/extra support
Rcheliguy
thingiverse
free
Simlab vertical Fairings by RCHeliGuy
...thingiverse
something to dress up the plate that holds the vertical profile in place
requires one m8x16 bolt and t-nut to mount.
thingiverse
free
Racing Glove Holder by RCHeliGuy
...rig.
fits 40 series 120mm uprights on a profile rig.
uses a single m8x16 bolt to attach
has a rib that fit in the 40 series slot.
thingiverse
free
Profile 8020 End Cap by RCHeliGuy
...20 end cap by rcheliguy
thingiverse
an 8020 end cap didn't exists, so i made one to finish off the open end of my dead pedal
thingiverse
free
Single Angled Exhaust for flexible configuration by RCHeliGuy
...grees and 70mm in diameter these can be printed in any number and turned to point in any direction.
each will take an m8x16 bolt.
thingiverse
free
Phone Holder by RCHeliGuy
...e for her phone for video meetings, so i bumped the dimensions a bit.
both have m5 bolt holes.
smaller = 25mm oc
larger = 37mm oc
thingiverse
free
Neutrik 2,4 Pole mount by RCHeliGuy
...eries profile
https://www.amazon.com/gp/product/b07z3fxr8l
it uses 2 x m3x12 bevel head bolts to hold the receiver to the mount.
thingiverse
free
SimLab SC2 mount cover V3 by RCHeliGuy
... cap bolts.
i've removed the original stl file which had a couple flaws and replaced it with something a bit cleaner looking.
thingiverse
free
Trackball Mouse Support by RCHeliGuy
...ack of my pse usb mount back and then melted those holes open to insert more m3 threaded inserts as shown in one of the pictures.
thingiverse
free
Cup Holder ( Sim Racing God ) by RCHeliGuy
...iate.
this has the same dimensions as my other 32 oz camelbak cup holder.
it has 8mm bolt holes 40mm apart for a profile sim rig.
thingiverse
free
SimRig Camelbak Cup holder by RCHeliGuy
... adapter ( 28" long )
and a magnetic tube clip
the bite tube can clip to your 4 or 5 point shoulder harness for long races.
Pse
3d_export
$129
peugeot 508 pse 2021
...hank you for buying squir models<br>---------------------------------------------------------------------------------------
3d_export
$129
peugeot 508 sw pse 2021
...hank you for buying squir models<br>---------------------------------------------------------------------------------------
3dfindit
free
PSE
...pse
3dfind.it
catalog: abb
3dfindit
free
PSE
...pse
3dfind.it
catalog: a&t
3dfindit
free
PSE
...pse
3dfind.it
catalog: abb low voltage & systems
3dfindit
free
RACD03-PSE
...racd03-pse
3dfind.it
catalog: recom power
thingiverse
free
PSE bow and crossbow part
...pse bow and crossbow part
thingiverse
it's a part of pse bow and crossbow
thingiverse
free
TGV PSE Rework Kato by Joh76
...tgv pse rework kato by joh76
thingiverse
voici le rework de tgv pse kato en n et en 3d
thingiverse
free
PSE Mongoose Quiver Bracket by trailcamaddict
...verse
drew up a pse mongoose quiver mount because i needed one right away! use the original screws, hinge pin and locking lever.
thingiverse
free
PSE X-Factor Clicker
...ake mine in pla. also made it longer for those that are just starting to use a clicker and their draw is not as long as mine is.
Simlab
3d_ocean
$59
Eratros supercar concept
...in blender3d 2.73 version.realistic renderings were created with my simlab composer 2015 rendering software,similar to keyshot and to other...
thingiverse
free
Simlab vertical Fairings by RCHeliGuy
...thingiverse
something to dress up the plate that holds the vertical profile in place
requires one m8x16 bolt and t-nut to mount.
thingiverse
free
Simlab GT1 Evo 480 P1X Front Mount Spacers by AndrewUK1990
...drewuk1990
thingiverse
this is a 10mm spacer to allow direct fitment of a simlab p1x front mount dash onto a gt1 evo 480 simrig.
thingiverse
free
SimLab PSE USB DIN mount by RCHeliGuy
...n takes 4 x m3x20mm bolts and locknuts to secure the din face as well as 2 x m8 x 30mm bolts to secure it to the upright profile.
thingiverse
free
MFG Crosswind 105mm Pedals for SimLab P1(X) Chassis by RCHeliGuy
...y foot pedal deck is not a stock p1 or p1x.
coming soon: a 3d printed mfg crosswind adjustable mount to fit inside the simlab p1.
thingiverse
free
SimLab SC2 mount cover V3 by RCHeliGuy
... cap bolts.
i've removed the original stl file which had a couple flaws and replaced it with something a bit cleaner looking.
thingiverse
free
SimLab Vertical Mount Facia USB Mount by RCHeliGuy
... or very small screwdriver can help to center the nuts.
the usb mount takes 4 x m3x20mm bolts and locknuts to secure the din face
thingiverse
free
Crosswind mount for Simlab P1(X) by RCHeliGuy
...bolts can be used if you have them. these lengths are for an exact fit.
i really like the very beefy m6 inserts that i linked to.
thingiverse
free
2DOF SimLab GT2 Motion Simulator
...tem/33059491619.html
shrink tube:https://www.banggood.com/custlink/3vg3gzvq0f
pliers:https://www.banggood.com/custlink/k3k34i3k64
Usb
3d_ocean
$3
USB Thumbdrive
...usb thumbdrive
3docean
thumbdrive usb usb drive usb stick
this is a swivel type usb thumb drive.
3d_ocean
$5
Usb Stick
...usb stick
3docean
flash stick usb usb memory usb stick
usb stick created using 3ds max 2015 and rendered on mental ray.
3ddd
$1
USB cable
... кабель , провод
высокополигональные модели кабелей usb.
3d_ocean
$5
USB Stick
...usb stick
3docean
32gb computer memory plug plugin protection usb usb stick
an usb stick with built-in plug protection
3d_ocean
$6
USB Stick
...tick
3docean
32 gb flash ram gigabyte memory metal nand plug ram stick usb usb 3 usb stick
usb stick with texture and normal map.
turbosquid
$5
USBS
...bs
turbosquid
royalty free 3d model usbs for download as max on turbosquid: 3d models for games, architecture, videos. (1466594)
3d_export
$5
usb flash
...usb flash
3dexport
usb flash
3d_export
free
usb flash
...usb flash
3dexport
usb flash
3d_export
free
usb flash
...usb flash
3dexport
usb flash driver
3ddd
$1
usb
...usb
3ddd
флешка
флешка
Vertical
3ddd
$1
Vertical curtain
...vertical curtain
3ddd
роллеты
vertical curtain
modern curtain
design_connected
$11
Mr.Tubes Vertical
...mr.tubes vertical
designconnected
tonone mr.tubes vertical computer generated 3d model.
3ddd
free
Vertical gardening
... фитомодуль , фитостена
vertical gardening
2000x1000x165
vizpark
$5
Einstein Vertical
...tical is a set of 3d brick textures for modern buildings, including mulit-textures and 4k tileable textures with material layers.
turbosquid
$5
brazier vertical
... free 3d model brazier vertical for download as sldas and ige on turbosquid: 3d models for games, architecture, videos. (1647570)
turbosquid
$18
Vertical blinds
...ee 3d model vertical blinds for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1604868)
3d_export
$40
vertical stirling engine
...vertical stirling engine
3dexport
vertical stirling engine
turbosquid
$6
vertical fence
...d model vertical fence for download as c4d, 3ds, dxf, and obj on turbosquid: 3d models for games, architecture, videos. (1571631)
turbosquid
$50
Vertical Garden
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
vertical flag
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)