Thingiverse
T-Slot Screw Inserts. Two styles by ShuttleSpace
by Thingiverse
Last crawled date: 3 years ago
Push-in spring loaded grommet for attaching things to T-slot system. Has hole for a screw.
These were made using the Vention profile. The slot width is 8MM
The square one clips in, the round one needs to be inserted from the end.
Clip-in are designed to go in, not out, so they may need to be slid out the end or broken to remove. Once a screw goes in, the part will lock into place, so it could also act as a stop.
Printing flat part up/dn makes it resist the leg breaking.
2nd set of the models are to hold a 2X10mm magnet. Should fit tighter in the t-slot also.
Maybe a bit hard to get in if using PLA, maybe a punch and hammer will work.
The Orchard edit tree if something needs an adjustment:https://3dorchard.com/app/single/5908fccdf25de30d48a92b0b/597a495c184bb80d431e3644
These were made using the Vention profile. The slot width is 8MM
The square one clips in, the round one needs to be inserted from the end.
Clip-in are designed to go in, not out, so they may need to be slid out the end or broken to remove. Once a screw goes in, the part will lock into place, so it could also act as a stop.
Printing flat part up/dn makes it resist the leg breaking.
2nd set of the models are to hold a 2X10mm magnet. Should fit tighter in the t-slot also.
Maybe a bit hard to get in if using PLA, maybe a punch and hammer will work.
The Orchard edit tree if something needs an adjustment:https://3dorchard.com/app/single/5908fccdf25de30d48a92b0b/597a495c184bb80d431e3644
Similar models
thingiverse
free
T-Slot Clip on Cover by Dirka86
...s out there either didn't fit or didn't work so i designed this one. it fits very snugly and closes up the t-slot nicely.
thingiverse
free
Tablet Mount for 20x40 V-Slot 3D Printer - clip on by goldentuna1200
...needed.
you could also drill holes through the back if you wanted to lock it down with 5m screws. i just didn't see the need.
thingiverse
free
Airsoft M56A Stock Mount Clip by enone
...ng screw all the way, slide out the old one the insert the new one. reinsert the screw and fit the rubber part back over the end.
thingiverse
free
Adjustable Tube Cutting Guide up to 100mm by Bob68
...ne with thread lock in the guide so that it spins.
there are also two holes if you wish to screw it down using countersunk screws
thingiverse
free
3030 Three Way T-Slot by Wingeddonkey
...b inserts with m3 grub screws to tighten them to the frame.
the inserts are inserted into the 5.5mm hole using a soldering iron.
thingiverse
free
RailCore II Cable Clip by kraegar
...tie, and just cut the ends off. inserted it in with my wiring bundle, and it keeps the bundle upright so it can't flop over.
thingiverse
free
Custom Z-end by heprom
...art.
this part just replace the acrylic part from geeetech. you can insert a standard 8 mm bearing to help guide your lead screw.
thingiverse
free
Tip for FitBit One Pocket Clip by harlev
...e metal end of the clip. i also made the tip a little taller to cover more of the metal.
update: added one model with fitbit text
thingiverse
free
Twist-in cable clip by jounit
...ils, and also needed a more flexible way to insert and take out bunch of cables. take in around 9mm diameter (bunch of) cable(s).
thingiverse
free
T-Clip for Deck
...o not screw to far down as it will crack the t-clip. some recommend doing the last part of the screw by hand tightening.)
repeat.
Shuttlespace
thingiverse
free
Hinge1of3 by ShuttleSpace
...hinge1of3 by shuttlespace
thingiverse
hinge, rugged, two halves plus pin, 3 files total
source: tracepartsonline.net
thingiverse
free
Latch Hook by ShuttleSpace
...latch hook by shuttlespace
thingiverse
could be used for rope tie offs
thingiverse
free
Rod End for Linkage by ShuttleSpace
...rod end for linkage by shuttlespace
thingiverse
for mechanical linkages, cables, ropes, etc.
thingiverse
free
Bike Headlight by ShuttleSpace
...bike headlight by shuttlespace
thingiverse
clip-on front light for bicycle head tube. norco has 40mm diameter tube here.
thingiverse
free
Heavy Conical Spring by ShuttleSpace
...heavy conical spring by shuttlespace
thingiverse
heavy spring, cone shape
source: tracepartsonline.net
thingiverse
free
90Degree Flat Angle by ShuttleSpace
...90degree flat angle by shuttlespace
thingiverse
flat 4 holes, 90 degree plate, countersunk
thingiverse
free
Flat Joiner Plate by ShuttleSpace
...flat joiner plate by shuttlespace
thingiverse
flat plate with 4 countersunk holes, for joining things together
thingiverse
free
Elevator Car Buttons by ShuttleSpace
...elevator car buttons by shuttlespace
thingiverse
16 floor elevator buttons
make your own lift!
thingiverse
free
Coat Hook, Rectangular profile by ShuttleSpace
...coat hook, rectangular profile by shuttlespace
thingiverse
simple coat hook
source: tracepartsonline.net
thingiverse
free
Simple 90 Degree Corner by ShuttleSpace
...simple 90 degree corner by shuttlespace
thingiverse
90 degree corner without holes
Inserts
turbosquid
$10
insert a bracelet
... 3d model the link element insert for download as max and max on turbosquid: 3d models for games, architecture, videos. (1609593)
turbosquid
$56
Threaded Inserts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Insert for eggs
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$14
drawing of needle inserting machine
...lectronic manufacturers use pin machines to help customers to insert needles, so as to obtain processing costs and obtain wealth.
turbosquid
$5
IKEA Insert drawers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA insert with door
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Siemsn EQ 6 Inlet insert
...placed there without any problems. the insert is then straight for normal cups and a square insert can be removed for large cups.
turbosquid
$25
eagle insert on leather or rubber
...eagle insert on leather or rubber for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1342476)
turbosquid
$22
Fireplace Stovax - Knightsbridge Insert
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Fireplaces Stovax - Knightsbridge Insert
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Slot
3d_export
$5
slot handle
...slot handle
3dexport
slot handle
archibase_planet
free
Slot machine
...ase planet
slot machine slot-machine playing machine
slot machine n260311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Slot machine
... machine slot-machine one-armed bandit
slot machine novomatic gaminator n240911 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$5
narrow slot handle
...narrow slot handle
3dexport
narrow slot handle
turbosquid
$15
Slot Machine
...oyalty free 3d model slot machine for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710861)
turbosquid
$25
Slot Machine
... free 3d model slot machine for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1649555)
turbosquid
$25
Coin Slots
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Slot Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
slotted spoon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Slot Machine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Styles
3ddd
$1
style
...style
3ddd
манекен , одежда
style
3ddd
$1
BM Style
...bm style
3ddd
bm style
кресло bm style с материалами и тестурами
3d_export
$5
style handle
...style handle
3dexport
style handle
3d_export
$6
new style
...new style
3dexport
new style room
turbosquid
$1
style
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Roman style
...roman style
3dexport
roman style architecture house
3ddd
$1
Ceppi Style
...ceppi style
3ddd
ceppi style
качественная модель классического стола ceppi style с текстурами и материалами v-ray
3ddd
$1
Kolo Style
...kolo style
3ddd
kolo
умывальник kolo style, арт. l21950
3ddd
$1
Banos Style
... style
производитель banos
модель style
в архиве присутствует дополнительная версия с материалами для corona
3ddd
$1
Кухня Free-style
...кухня free-style
3ddd
free-style
кухня free-style
Screw
3d_export
$5
screw
...screw
3dexport
screw
turbosquid
$29
Screw driver and screws
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Screw
... steel twist wood screw
screw 3d model in 2 different materials real world scale rendered with mental ray file formats: .max .obj
3d_ocean
$4
Screw
...n
3d bolt male mechanic metal nut parts prop propeller schraube schraubenmutter screw steel twist
screw 3d model, clean modeling.
turbosquid
$2
screw
...crew
turbosquid
royalty free 3d model screw for download as on turbosquid: 3d models for games, architecture, videos. (1198271)
turbosquid
free
Screw
...screw
turbosquid
free 3d model screw for download as obj on turbosquid: 3d models for games, architecture, videos. (1240851)
3d_ocean
$2
Frame Screw
...frame screw
3docean
construction screw
a frame screw and plug.
turbosquid
$27
screw
...w
turbosquid
royalty free 3d model screw for download as max on turbosquid: 3d models for games, architecture, videos. (1334064)
turbosquid
$20
SCREW
...
turbosquid
royalty free 3d model screw for download as sldas on turbosquid: 3d models for games, architecture, videos. (729733)
turbosquid
$1
Screws
...
turbosquid
royalty free 3d model screws for download as max on turbosquid: 3d models for games, architecture, videos. (1640360)
Two
turbosquid
$4
Two Axes Two States
...free 3d model two axes two states for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1468396)
3d_export
$5
s of two one and two
...blender file. one burner cooker: vertices: 16,221 faces: 14,780 triangle: 31,490 two burner stove: vertices: 25,200 faces: 23,625
turbosquid
$20
two
...osquid
royalty free 3d model two for download as 3ds and stl on turbosquid: 3d models for games, architecture, videos. (1435051)
3ddd
$1
avec two
...avec two
3ddd
jmm , avec two
jmm avec two
3ddd
$1
cea two
... вентилятор , потолочный
cea two
все размеры
vray+corona
3d_export
$5
Two speaker
...two speaker
3dexport
this is a 3d model of two speakers from sven
3d_export
free
Two wall
...two wall
3dexport
two wall<br>.blend
design_connected
$29
All-Two
...all-two
designconnected
bonaldo all-two computer generated 3d model. designed by bicego, sergio.
design_connected
$9
Two Timer
...two timer
designconnected
established & sons two timer computer generated 3d model. designed by industrial facility.
turbosquid
$21
DAVENTRY Two Over Two Chest of Drawers
... chest of drawers for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1684477)
T
design_connected
$11
T & T
...t & t
designconnected
dark t & t computer generated 3d model. designed by de ryck, christophe.
3d_export
$5
t-800
...t-800
3dexport
t-800
3ddd
$1
Table T
...table t
3ddd
журнальный
table t
3ddd
free
T-Rex
...t-rex
3ddd
t-rex
rrrrrr
3d_export
$5
t-virus
...t-virus
3dexport
it's t-virus
3d_export
$5
T-26T
...t-26t
3dexport
artillery tractor on the t-26 chassis ussr
3ddd
$1
T 45
...t 45
3ddd
t-45
кабинет руководителя t 45
12 предметов
подробнее:http://www.prezident-mebel.ru/index.php?productid=1541
3ddd
free
SAFE T
...safe t
3ddd
огнетушитель
креативные огнетушители от компании safe t
3d_export
free
t-rex
...t-rex
3dexport
t-rex have normal map and base color textures
3d_export
$75
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958