Adjustable Tube Cutting Guide up to 100mm by Bob68

Last crawled date: 3 years ago

Adjustable tube cutter up to 100mm if you include the front face. The 3mm and 4mm inserts also have a fixed 25mm inner slot that can be drilled deeper if needed. The Guide has markings every 5mm up to 60mm. The inserts have 7 cutting slots spaced at 10mm intervals. There are inserts for 3,4,6 and 8mm tubes. The cutting slots are 1mm wide. There are two slots for either right or left handed use.
The assembly consists of the following additional parts:-
6mm Studding by 120mm long.
6mm wingnut or thumb nut.
3 x 6mm half nuts
One used as a locking nut for the thumb nut.
One used in the insert.
One with thread lock in the guide so that it spins.
There are also two holes if you wish to screw it down using countersunk screws