Thingiverse
Raspberry Pi Zero Unicorn by PacketPaul
by Thingiverse
Last crawled date: 3 years, 1 month ago
A Raspberry Pi Zero case specially designed for the Pimoroni Unicorn pHAT. The Raspberry Pi Zero ports are fully accessible and the top snaps securely to the bottom. The cover uses .2m of plastic almost directly on top of the LEDs to give a bright but every so slightly diffused look. I recommend either white or clear to allow full color spectrum.
Print the top, bottom, and support pins. Assemble by pressing the Raspberry PI (Carefully!) into the bottom of the case. Add the support pins and install the Unicorn pHAT.
When installing the top, realize the clips are not centered. Because of the geometry of the Raspberry Pi Zero, the clips are slight offset to the MicroSD card. Make sure you put the top on in the correct direction!
Once the top is installed, it is difficult to take apart without breaking the clips on the case. If you do need to remove the cover, press on the side with the microUSB/HDMI adapters to release that clip first. Then gently the opposite side free. A small screwdriver is handy.
Print the top, bottom, and support pins. Assemble by pressing the Raspberry PI (Carefully!) into the bottom of the case. Add the support pins and install the Unicorn pHAT.
When installing the top, realize the clips are not centered. Because of the geometry of the Raspberry Pi Zero, the clips are slight offset to the MicroSD card. Make sure you put the top on in the correct direction!
Once the top is installed, it is difficult to take apart without breaking the clips on the case. If you do need to remove the cover, press on the side with the microUSB/HDMI adapters to release that clip first. Then gently the opposite side free. A small screwdriver is handy.
Similar models
thingiverse
free
Pi Zero and Unicorn pHAT Case by PotatoFi
... ports facing down.
it's designed to be easy to print, and there's a hole in the back so you can remove the pi if needed.
thingiverse
free
Pi Zero Camera by maikischa
...side there is an opening for a usb power supply. the top cover has clip mounts and the camera is slides in, so no tools required.
thingiverse
free
Pi-Zero USB Case by azcoigreach
...e wall only to provide additional friction to clips against the inside of the bottom.
i hope this case is useful for you. enjoy.
thingiverse
free
Raspberry Pi Zero Camera case by ra100
...camera module for raspberry pi zero
this is just bottom part of the case, take top covers from raspberry pi zero v1.3 simple case
thingiverse
free
Pi Zero Face Case by Keebie81
...with no designs for customization
the pi zero used in the design came from here - https://grabcad.com/library/raspberry-pi-zero-2
thingiverse
free
Raspberry PI Zero Case for Pimoroni ScrollpHAT by ResistantX
...o case for pimoroni scrollphat by resistantx
thingiverse
a rudiment case for the raspberry pi zero and the pimoroni scroll phat.
thingiverse
free
SoaPiBarZeroW pHat DAC Tub by markab
...arzero - a soap bar shaped enclosure for the raspberry pi zero.
this version is a case for any raspberry pi zero with a phat dac.
thingiverse
free
Raspberry PI Zero W Case by Gunslinger59
...ro w case by gunslinger59
thingiverse
remix of pyromaniac's raspberry pi zero case with thicker top and bottom and no holes.
thingiverse
free
Raspberry Pi Zero Case + Pin space by Oink3
...raspberry pi zero case + pin space by oink3
thingiverse
added some bottom space for the pins.
thingiverse
free
Raspberry Pi Zero Case for 3030 Extrusion by mimisb13
...raspberry pi zero case for 3030 extrusion which attaches and detaches with a simple twist.
support is required only for the clip.
Packetpaul
thingiverse
free
Blue Crab Ruler by PacketPaul
... state of maryland, i've included a generically titled version. most states on the east coast have a limit size of 5 inches.
thingiverse
free
Appalachian Trail Logo by PacketPaul
...ons of the trail.
at-cutout - at logo cut out of a triangle. would make a great decoration against a complementary color wall.
thingiverse
free
30mm Fan Clip-On Guard/Grill by PacketPaul
...fan. on the 30mm fan, two of the bump-outs hit the screws. the offending bump-outs have been removed making room for the screws.
thingiverse
free
Jeep Hitch Cover by PacketPaul
...d a 3d printable hitch pin to attach the jeep hitch cover to the vehicle. check it out:
http://www.thingiverse.com/thing:2222961
thingiverse
free
Raspberry Pi B+ Case With Tabs by PacketPaul
...y prefer rickseiden's remix http://www.thingiverse.com/thing:1620017. i've not printed ricks design, but it looks great.
thingiverse
free
Raspberry Pi Zero Soldering Holder by PacketPaul
...our pi exactly 8.2 mm above the bottom plate. the pins rest securely in a small box assuring the correct alignment with the pi.
thingiverse
free
Sewing Spool Holder Cap by PacketPaul
...large" size for most of her work.
small = diameter 20mm
medium = diameter 30mm
large = diameter 40mm
x-large = diameter 60mm
thingiverse
free
Hitch Cover Pin by PacketPaul
...ld a hitch cover. after a full year of abuse, it still holds strong. print one nut, one bolt, and optionally 2 washers.
have fun!
thingiverse
free
Shore Power Clip for a Boat, RV, or home 30 amp cable by PacketPaul
... be removed when needed.
there are two versions for a #10 or #8 screw. i found #8 deck screws worked perfect for my application.
Unicorn
3ddd
$1
Unicorn sculpture
... единорог , лошадь
unicorn decorative sculpture
turbosquid
$25
Unicorn
...turbosquid
royalty free 3d model unicorn for download as max on turbosquid: 3d models for games, architecture, videos. (1513618)
turbosquid
$99
Unicorn
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$28
Unicorn
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
Unicorn
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
unicorn horse white
...unicorn horse white
3dexport
unicorn horse white
turbosquid
free
Coconut the unicorn
...quid
free 3d model coconut the unicorn for download as blend on turbosquid: 3d models for games, architecture, videos. (1574982)
turbosquid
$33
Cartoon unicorn
...id
royalty free 3d model cartoon unicorn for download as fbx on turbosquid: 3d models for games, architecture, videos. (1500357)
3d_export
$5
unicorns head
...unicorns head
3dexport
3d_export
free
unicorn cookie cutter
...unicorn cookie cutter
3dexport
unicorn cookie cutter, more cookie cutters here:
Zero
3ddd
$1
ZERO, BEAM
...zero, beam
3ddd
zero
поворотная люстра zero , beam
design_connected
$9
Zero-in
...zero-in
designconnected
established & sons zero-in tables computer generated 3d model. designed by jay osgerby .
3ddd
free
Sub-Zero
...sub-zero
3ddd
sub-zero , голова
sub-zero corona render!
3ddd
$1
Metalspot / Zero
...metalspot / zero
3ddd
metalspot
metalspot zero
3ddd
$1
Catalano Zero
...catalano zero
3ddd
catalano , унитаз
catalano zero
3ddd
$1
SUB ZERO
... sub zero
the first and only 3d model of sub zero refrigerator.
the model is very accurate.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
ZERO / Hide
...zero / hide
3ddd
zero
polys: 25486
wire-spline
Raspberry
3d_export
free
raspberry
...raspberry
3dexport
3d model of a raspberry. i tried to make it realistic.
turbosquid
$27
Raspberries
...y free 3d model raspberries for download as max, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1354176)
turbosquid
$14
Raspberries
...y free 3d model raspberries for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1364663)
3d_export
$5
raspberry pi
...raspberry pi
3dexport
carcasa para la raspberry pi
turbosquid
$99
Raspberry
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
raspberries
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Raspberries 3D Model
...raspberries 3d model archive3d raspberries raspberry raspberries n300911 - 3d model (*.3ds) for interior 3d...
3d_export
$5
raspberry fruit
...raspberry fruit
3dexport
3d_export
$5
raspberry
...y different sizes. their color ranges from light burgundy to pink. there are formats: obj, 3ds, blend, dae, fbx, mtl.<br>:)
evermotion
$12
raspberries 23 am130
...evermotion raspberries 23 am130 evermotion key 23 food fruit raspberry fruits am130 raspberries highly detailed 3d model of raspberries...
Pi
design_connected
$11
Pi
...pi
designconnected
ligne roset pi chairs computer generated 3d model. designed by thibault desombre.
3d_export
$5
raspberry pi
...raspberry pi
3dexport
carcasa para la raspberry pi
turbosquid
$18
pied
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люста emme pi light
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
бра классическое emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
design_connected
$16
Pi-Air
...pi-air
designconnected
living divani pi-air lounge chairs computer generated 3d model. designed by harry & camila.
3d_ocean
$15
Manneken Pis
...picting a naked little boy urinating into a fountain’s basin. (wikipedia) the model was sculpted in blender 2.70a rendered wit...
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люстра классическая фирма: emme pi light
артикул: 3595/5/cot/12/wh