Pi-Zero USB Case by azcoigreach

Last crawled date: 3 years, 4 months ago

Minimalist Case for Raspberry Pi Zero.
Pi Zero configuration:
Raspberry Pi Zero W
Pimoroni eInk pHat - https://shop.pimoroni.com/products/inky-phat?variant=12549254217811
USB Expansion - https://zerostem.io/
This case was designed to be very minimal. The Pi can be screwed into the bottom of the case with M2.5 screws, I used the nylon screws that came with the USB expansion. The top of the case is designed with very tight tolerances to hold the eInk display in place and keep the top on without additional hardware. Please be very mindful when installing the display, eInk displays are very resilient but you don't want to damage the surface or sides of the screen. Inserting the display into the top is intended to be tight but not deform the side wall only to provide additional friction to clips against the inside of the bottom.
I hope this case is useful for you. Enjoy.