Paint shaker (valejo, army painter citadel etc.) by Jenser

Last crawled date: 3 years, 1 month ago

Slapped a paint shaker for my acrylic Paints together.
Additionally to the printed parts you need:
1x M8x40 Hex Shaft Bolt (or longer)
2x M8 Washers
1x M8 Nut (Selflocking recommended)
1x M5x30 Shaft Bolt (or longer) --> gets directly screwed into the plastic
2x M5 Washers
You hook up an electrical drill to the open end of the M8 Bolt and voila, your paints almost shake themselves.
Note of caution: The stl files are not positioned properly when imported into your slicer, you need to lay them flat on the bed to print properly! (As seen in one of the pictures)
Update: Vertical Version:
New Parts for the Vertical Version are all marked "Vertikal", rest is the same as in the swinging action one.