Thingiverse
Hobby Paint Shaker by bombaman
by Thingiverse
Last crawled date: 2 years, 11 months ago
NOTE: This thing isnt being activley worked on. I did the design about 4-5 years ago, and it worked great for my needs. I've uploaded the STL's here for you to have a go at if you like. Most fastners are made for metric cap heads and certain sized bearings like 608Z and others. Whilst with the right hardware and some basic motor control it does work great, its not a finished "thing" and would do well for a mondernized remix.
Paint Shaker that runs off a 12v DC motor.
It was inspired by https://www.thingiverse.com/thing:1619909, but not directly remixed from. Mount fits Valejo style bottles across its length when using the "tall bottle insert" from https://www.thingiverse.com/thing:1619909/files, and GW style bottles across the width. Use an elastic band or simmilar to hold the bottoles.
Insert a bolt into the holder, and lock it with a lock nut from the bottom. Add some washers and then use some more nuts to lock against the mounting flange, but not too tight as it needs to pivot back and forth by a few degrees.
Works fine, but the parts do eventually wear out. Some grease in the ball joint works well, and recommend printing the connecting rod in ABS so it can snap around the ball joint.
Paint Shaker that runs off a 12v DC motor.
It was inspired by https://www.thingiverse.com/thing:1619909, but not directly remixed from. Mount fits Valejo style bottles across its length when using the "tall bottle insert" from https://www.thingiverse.com/thing:1619909/files, and GW style bottles across the width. Use an elastic band or simmilar to hold the bottoles.
Insert a bolt into the holder, and lock it with a lock nut from the bottom. Add some washers and then use some more nuts to lock against the mounting flange, but not too tight as it needs to pivot back and forth by a few degrees.
Works fine, but the parts do eventually wear out. Some grease in the ball joint works well, and recommend printing the connecting rod in ABS so it can snap around the ball joint.
Similar models
thingiverse
free
Remixed Universal Hobby Paint Shaker by juz4kix
...r by whayden001.
he has it using m2.6 screws. i set it up to use 6-32 nut and bolt.
see (and like) the original for instructions.
thingiverse
free
Remix of "Universal Ball Mount System" for 19mm tube by Maddoctor
...diameter tube" that i used for the cup holder mounted to the wheelchair with thing: http://www.thingiverse.com/thing:1581760
thingiverse
free
Ender-3 (and Pro) Bed handle with ball joint mount for Raspberry Pi Camera
...7 with a ball joint mount added to work with https://www.thingiverse.com/thing:3017729.
thanks to users giacomo30196 and larnom.
thingiverse
free
Camera Mount for CR-10 with Ball Joint
... from macd2point0 added ball joint. see my other thing https://www.thingiverse.com/thing:4098903 for a mount for a sony hdr-as50.
thingiverse
free
Z Rod Lock by Rushmere3D
... worked great for the lower z nut but i still had wobble so i removed the nut from the scad file and made this.
works great :-)
thingiverse
free
Pi Camera with IR back lid with ball joint by rafi1421
...iverse.com/thing:4168883 and merged the ball joint from the mount i'm printing from https://www.thingiverse.com/thing:3905010
thingiverse
free
Brodit Compatible Ball Joint (REMIX from Open Source Ball Joint) by L00TW1CK
...stem!
edit: use "kugelplatte mit schraube.stl" for printing as you can´t print the screw and the ballplate separately!!
thingiverse
free
Ball joint Remix for 2020 profile by Manolo1948
...ing:3500920 to mount on 4020/2020 aluminium profile.
pictures show both original by gavitka and remix mounted on printer profile
thingiverse
free
RAM Ball Mount by ajasper39
...t by ajasper39
thingiverse
1" ram ball mount with an extended shaft.
remixed from https://www.thingiverse.com/thing:2608244
thingiverse
free
Opel Ampera / Chevrolet Volt phone cd mount ball joint
.../ chevrolet volt phone cd mount ball joint
thingiverse
remix https://www.thingiverse.com/thing:3776394
ball joint in the middle
Bombaman
thingiverse
free
90 Degree Dump Pipe by bombaman
...90 degree dump pipe by bombaman
thingiverse
quick 90 degree dump pipe, based on a 3" with triangular exhaust flange
thingiverse
free
Anet A8 Hold Down Bracket - M6 by bombaman
...anet a8 hold down bracket - m6 by bombaman
thingiverse
remix to mount a m6 bolt (with 10mm head)
thingiverse
free
FrankenCarriage V2 - Remixed Sensor Holder by bombaman
...nsor holder by bombaman
thingiverse
remixed the sensor holder to clear the nut, and also allow the anti-vibration washers to fit
thingiverse
free
NEMA17 Basic Mount by bombaman
...8 extruder, with m6 bowden fittings.
have also uploaded a "reversed" version, where the motor mounts on the other side.
thingiverse
free
OneFinity 2.5" Dust Hose Clip by bombaman
...ut await an updated model
mount to sit on the z slider nema23 motor and attach a 2 1/2" hose
also includes a top hose mount.
thingiverse
free
E3D v6 40mm Fan Cooling for bombamans Mount Anet A8 by peed6687
...fan adapter on the clamp with a m3 bold. u can use 10 to 20mm long screws, the hole for the screw iss long enoth for 20mm screws.
thingiverse
free
Anet A8 Bowden Top Mount - For Ultimate Frame Brace by bombaman
...little to make some clearance, and cut one of the faces to make it easier to install the nut.
step file also included if required
thingiverse
free
E3D v6 Mount - Suit Anet A8 Fan Ducts by bombaman
...r 38 // x offset: -left +right [of the nozzle]
define y_probe_offset_from_extruder 6 // y offset: -front +behind [the nozzle]
Shaker
archibase_planet
free
Shaker
...shaker
archibase planet
shaker bar equipment
cocktail shaker - 3d model for interior 3d visualization.
3d_ocean
$8
The Shaker
...e formats included in this package are: .max; .3ds; .obj; materials are ready to use in vray. if you have some questions regar...
3d_ocean
$6
Protein shaker
...protein shaker
3docean
bottle health plastic bottle protein protein shaker shaker water
high poly plastic protein shaker
3ddd
$1
muscletech shaker
...muscletech shaker
3ddd
шейкер , чашка
muscletech shaker cup
turbosquid
$40
shakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
shakers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Sports shaker
...sports shaker
3dexport
multi-colored plastic sports shaker for training men and women
3d_export
$10
Shaker 3D Model
...shaker 3d model
3dexport
shaker stain bar bartender
shaker 3d model cyberarmy5643388 30464 3dexport
archive3d
free
Shaker 3D Model
... model
archive3d
shaker bar equipment
cocktail shaker - 3d model for interior 3d visualization.
3d_ocean
$6
Salt and Pepper Shakers
...and pepper shakers
3docean
condiments pepper restaurant salt shakers spices tableware
typical restaurant salt and pepper shakers.
Hobby
archive3d
free
Hobby 3D Model
...ing-horse hobby-horse
seat baby n070411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
HOBBY ROCKET
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Hobby Knife
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$17
HOBBY PAINT BOTTLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кресло Hello Hobby 3108-01
... hello hobby
классическое кресло из ротанга фабрики hello hobby. арт. 3108-01. габариты 950*890*1030
3ddd
free
Стул Hello Hobby 3108-09
... hello hobby
классический стул ручной работы из ротанга фабрики hello hobby. арт. 3108-09. габариты 670*580*1030
3d_export
$49
Houston William Hobby Airport 10km
...houston william hobby airport 10km
3dexport
3ddd
$1
Стол Hello Hobby 3014(2)-07
... hello hobby
классический стол ручной работы из ротанга фабрики hello hobby. арт. 3014(2)-07. габариты 900*1600*770.
3ddd
$1
Консоль Hello Hobby 3083-51
... консоль.
консоль в классическом стиле ручной работы из ротанга фабрики hello hobby. арт. 3083-51. габариты 430*1220*760.
turbosquid
$99
Hobby and Decor Set 04 (22 Product)
...d decor set 04 (22 product) for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262740)
Paint
archibase_planet
free
Paints
...paints
archibase planet
paints paint
paints n241211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Paint
...paint
archibase planet
jar of paint paint can
paint - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
paint
...paint
3ddd
paint
archibase_planet
free
Paint
...paint
archibase planet
paint
paint - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
Painting
...painting
3ddd
картина
painting in double wooden frame decorated antique
3ddd
$1
The collection of paintings
...
картина , фото
collection of modern and contemporary paintings.
contemporary paintings.
turbosquid
$29
painting
...free 3d model painting for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1383201)
turbosquid
$1
Painting
...ee 3d model painting for download as 3ds, obj, md3, and blend on turbosquid: 3d models for games, architecture, videos. (1207611)
turbosquid
free
Painting
... 3d model painting for download as ma, 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1219609)
3ddd
$1
PAINTINGS
...paintings
3ddd
панно
размеры:
1170х900