thingiverse

free

Pi2 top without gpio by dalefukami

...pi2 top without gpio by dalefukami thingiverse removed the gpio access

thingiverse

free

GPIO Male and Female for projects by derek1976

...gpio male and female for projects by derek1976 thingiverse gpio male and female for projects

thingiverse

free

GPIO 40 Pin Cover by AlexW_579

...r the raspberry pi gpio to stop accidental short circuits. i am using this on a server where there is no need to access the gpio.

thingiverse

free

Raspberry PI 400 GPIO cover by DakkarDaemor

...raspberry pi 400 gpio cover by dakkardaemor thingiverse cover for gpio port on raspberry pi 400. easy to print

thingiverse

free

Raspberry Pi Zero Case (no GPIO) by charterj

...case (no gpio) by charterj thingiverse simple modification of the adafruit pi zero case that removes the gpio cutout on the lid.

thingiverse

free

Raspberry Pi 4 case GPIO by opaque01

...raspberry pi 4 case gpio by opaque01 thingiverse malolo´s screw-less raspberry pi 4 top case with gpio cutting.

thingiverse

free

Case with GPIO for ODROID C2/C1+ by SuperSonicFlea

...y supersonicflea thingiverse this part is a remix of sleeve case for odroid c2/c1+ but it includes an opening for the gpio pins.

thingiverse

free

38pin GPIO holder for Raspberry. by mykail

...maybe a stupid idea but here you go - it mounts your rpi via gpio connector to the frame of your printer. fits vslot. 25% infill.

thingiverse

free

Raspberry Pi GPIO Connector by vexaae

...y) or get a gpio ribbon cable from ebay (expensive but nice). d) print your own female-to-female gpio connector (cheap and nice).

thingiverse

free

SoaPiBarZero PiStick Top w/o GPIO by tjb1

...barzero pistick top w/o gpio by tjb1 thingiverse new top for soapibarzero pistick case by markab that has the gpio hole removed.

thingiverse

free

Raspberry Pi Case with GPIO Access by lincomatic

...s is a minor revision of hansh's excellent case for the raspberry pi. i added a slot on the top for access to the gpio pins.

thingiverse

free

Banana Jack Panel for GPIO or Synth by Agreendev

...giverse simple 2x10 4mm banana jack panel for gpio patch cables or a synthesizer. printed in pla with standard 0.2mm 10% infill

thingiverse

free

Raspberry Pi 400 GPIO Cover by Peter_M

...the exposed gpio ports on the raspberry pi 400 computer. used to prevent dust or accidental shorting of the pins when not in use.

thingiverse

free

gpio jumper hold downs by trav91

...gpio jumper hold downs by trav91 thingiverse holds down jumper wires all at once

thingiverse

free

Pi 3 B+ Case with GPIO Access by jdriscoll

...jdriscoll thingiverse this is a small tweak to this great case to fit the pi 3 b+ board with nes inspired vents and gpio access.

thingiverse

free

Raspberry Pi Case (with GPIO hole) by Sam0o7

... that's why i've decide to remix it. hole for gpio ports bigger hole for sd card access enjoy it, and thanks to walter !

thingiverse

free

Raspberry Pi 4 GPIO connector cover by wnmvde

...tor is always open and i want to protect this for damage and/or short circuit. i designed a simple cover for this gpio connector.

thingiverse

free

Trinus Rasperry Pi Case top with GPIO hole by timpuri

... using octoprint and powering trinus by atx power. i wanted to start power remotely via raspberry pi gpio, so i need to use gpio.

thingiverse

free

PiTFT50 Easy Stand Compact Case GPIO Opening REMIX by be_like_an

...t50 easy stand compact case gpio opening remix by be_like_an thingiverse same same but different. opening for gpio access added.

thingiverse

free

Raspberry Pi Box with GPIO PIN free by AgR3D

...s is a remix of the raspberry pi b+ case by cylgom. i increase the hole for the gpio pin access and i add some holes for cooling.

thingiverse

free

Raspberry Pi Aluminium Extrusion Mounted Case with GPIO by raven1280

...ed case with gpio by raven1280 thingiverse mount your raspberry pi directly on your 3d printer. remixed to add opening for gpio.

thingiverse

free

GPIO Cover (For official Pi Zero case) by DrJekyll

...ith a recess so it can be used if you fit a gpio header. space is tight so i had to use a soldering iron to melt a small lead in.

thingiverse

free

pin connector for gpio and boards by roha

...pin connector for gpio and boards by roha thingiverse connect dev boards to pins. entwicklerboard ohne löten mit pins verbinden.

thingiverse

free

Raspberry Pi GPIO Power Blocker for Prusa by Shwalamazula

...spberry-pi-zero-w-preparation-and-installation_2180 power pins are blocked as well. this is for externally-powered raspberry pis.

thingiverse

free

Extra top without gpio access for Safe and secure Raspberry Pi A+ Case by gordonendersby

...donendersby thingiverse i filled in the gpio access and left the two slots for camera and screen as i didnt need the gpio access

thingiverse

free

Raspberry PI Zero case GPIO and cam by Pulpataro

... one piece case for the rpi zero made by superrei. added gpio and cooling holes ... july/11/2018 added the case including the cam

thingiverse

free

Sleeve Case for Raspberry Pi B+ with access to GPIO ports by Catmembert

...h access to gpio ports by catmembert thingiverse forked from http://www.thingiverse.com/thing:604915 slot added for gpio access.

thingiverse

free

Raspberry Pi Case for Maker Select Plus and W GPIO access by Bmongar

...ns and i wanted to add a filament sensor that used gpio so i opened this in tinkercad and created a hole where the gpio pins are.

thingiverse

free

Raspberry Pi 4 snap fit mesh case with gpio access by NeoCode

...berry pi 4 snap fit mesh case with gpio access by neocode thingiverse i have remixed the mesh model that the gpio is accessible

thingiverse

free

Ender 3 Raspberry Pi 3 (No fan, No GPIO) by MakerKJS

...o) by makerkjs thingiverse remixed the lid since i do not need access to the gpio header. and a fan wasn't needed in my case

thingiverse

free

Raspberry Pi 2 large GPIO opening with cover by CVMichael

...or gpio and camera cable. i also uploaded the sketchup files. please get the other parts from the original thing (link above)

thingiverse

free

GPIO & Camera Hole Cover for Raspberry Pi 3 Ender 3 Case by MrNellow

...useful if you don't need any gpio pins or raspberry pi camera. if you need any gpio pin, you can shrink gpio cover by x axis.

thingiverse

free

Case for Waveshare GPIO Header Adapter, for Raspberry Pi 400 by mason_swiss

...nal brass stands makes scratches in my table... ;-) you find this product here:https://www.waveshare.com/pi400-gpio-adapter-b.htm

thingiverse

free

Raspberry Pi 400 GPIO Cover by jasonclark

...t, this connector will not be used and for many that will use on their desk, it becomes a risk of shorting out from usb/pens etc.

thingiverse

free

Raspberry pi 3 model A GPIO protection by mattoni

...rotects pins on the lower part od the board. i suggest to print on the printer bed with the orientation as shown in the picture.

thingiverse

free

Raspberry Pi Zero W case bottom GPIO indentation by DuMOHsmol

... -- with indentation for gpio header. other parts remain unchanged. i've just copied them so you can print the complete case.

thingiverse

free

Raspberry Pi Zero W case with GPIO opening by xyzo

...e but good case be rwindr. i changed the top part so that the gpio connectors can be used without having to cut the opening free.

thingiverse

free

Raspberry Pi Zero WiFi Camera Case for use with GPIO by Timo94

...4 thingiverse quick remix so you can use the gpio pins while your raspberry pi zero is in the case. please download on youmagine

thingiverse

free

Raspberry Pi Case with GPIO - Two Color by rweaving

...raspberry pi case with gpio - two color by rweaving thingiverse this is a two color case for the raspberry pi computer.

thingiverse

free

Canakit Case Lid for Raspberry Pi 4 with GPIO opening and fan holder by mistapita

...lder by mistapita thingiverse added a hole in the case to access the gpios and added support for the canakit fan without screws.

thingiverse

free

Housing for Raspberry Pi B 2 with Triple GPIO Multiplexing Expansion Board by wfvn

...expansion board by wfvn thingiverse housing for a raspberry pi 2 b with a triple gpio multiplexing expansion board on top of it.

thingiverse

free

GameShell V2 (microSD/GPIO accessible! no support!)

...ots for the gpio cable and the micro sd slot. :) prints without support. details https://p3dt.net/post/2019/12/19/gameshell.html.

thingiverse

free

Raspberry Pi 2 Case (easy access to GPIO) by ztreetZ

...esign a bit this case. i just made easy access to gpio hiding behind plug, removed vesa mounts and changed logo just for fun :).

thingiverse

free

Pi Case Upper solid gpio and 16pin cutout by Jason_55904

...nt-enclosure and i am also using a night vision camera with octoprint-octolapse so i added a cutout for the 16 pin ribbon cable.

thingiverse

free

40 Pin Raspberry Pi A+, B+, 2, 3 GPIO Connector by billioncash

...thingiverse modified blandman's gpio connector file to support the 40 pin connector found on the raspberry pi a+, b+, and 2.

thingiverse

free

Raspberry Pi 400 GPIO Dust Cover by Peter_M

...n use. the +sd card version extends one edge to completely cover the sd card slot, preventing the card from being easily removed.

thingiverse

free

Raspberry Pi 3 Case - Home Assistant Logo with GPIO slot by IROTRAS

...he gpio pins on the pi. so i just took the design, and shrunk down and moved to the side so i could fit a slot for the gpio pins.

thingiverse

free

Orange Pi Lite - Case with GPIO by MazeMieter

...eset button are not usable. you might want to add four legs at the bottom to allow air to flow in, if you do a lot of ram access.

thingiverse

free

Raspberry Pi 4 case with GPIO hole for easy prototyping

...cables to the gpio but also the 40 mm fan i've used nocua nf-a4x10. you can leave it always on, no pwd needed, is very quiet.

thingiverse

free

Raspberry Pi GPIO Header Soldering Jig by PiMinister

... male headers. the version 2 stl file will therefore work with male and female straight gpio headers, and 90 degree male headers.

thingiverse

free

Raspberry Pi 4 Case for 480x320 GPIO Display by Marks_Bench

...the display connects to the gpio right through the lid with the rectangular hole. the lid snaps into place and is easy to remove.

thingiverse

free

Raspberry Pi case for Prusa i3 / i3 Mk2 MM with GPIO by mdjurfeldt

...emix by c_wolsey where i have added a hole to make access to the gpio pins possible. it's suitable for the prusa i3 mk2 mmu.

thingiverse

free

Raspberry Pi Zero GPIO Pin Solder Jig

...ero gpio pin solder jig thingiverse i use this to hold the rpi zero on the bench when prototyping as well as soldering the pins.

thingiverse

free

PI ZERO W CASE + GPIO + RADIATOR by Gabsywood

...i zero w case + gpio + radiator by gabsywood thingiverse small case bottom and top for pi zero w (radiator dimension 15.5*15.5)

thingiverse

free

Zero4u 1.3 + Raspberry Pi Zero1.3 case with/without GPIO cut out by Slaybot

...he one made by superrei to cover the changes made for the zero 1.3. also included is a version with a cut out for a gpio header.

thingiverse

free

Numato 32 port USB GPIO board mount by henningc

...the board from sliding out slot for holding down the spring screw holes hiding screws below the board decent rounded-edges-design

thingiverse

free

PI GPIO Protection by Naesstrom

...wn, if needed clear the holes with a 0,75-1mm drill. if you want to make a remix fusion 360 file is here: https://a360.co/2dspogs

thingiverse

free

Anet A8 Raspberry Pi case for camera and GPIO by Guduche

... i also made the gpio hole a little larger. you can find the tinkercad project here: https://www.tinkercad.com/things/gik91il2u4c

thingiverse

free

Raspberry Pi case for Prusa i3 / i3 Mk2(remix for gpio access) by justinlgilbert

...erse needed a case for my raspberry pi 3, i wanted gpio access due it the pi being powered from my 12v leds/step down converter.

thingiverse

free

GPIO cover remix for Pi 4b only 34 pins covered

...gpio cover remix for pi 4b only 34 pins covered thingiverse remixed to only cover 34 of the 40 pins

thingiverse

free

30mm fan guard and GPIO cover for Pi 4b

...or 40mm fan adapter" is here:https://www.thingiverse.com/thing:4170069 and these are the fans i used:https://amzn.to/2senvyn

thingiverse

free

Power control of Kp3S using GPIO and SSR40DA（relay) with moonraker by misosiru

...ug versionhttps://www.thingiverse.com/thing:4817747 https://3dpmisosiru.blogspot.com/2021/04/moonrakerssr3dklippermainsailos.html

thingiverse

free

Raspberry Pi Zero cover with GPIO access by ascii_ch

...ed to protect my raspberry pi on my quadrocopter. can also be used to mount other componentes on the cover as shown on the image.

thingiverse

free

Raspberry Pi 3 Air Case w/GPIO port by Ajediday

...ry pi 3 air case w/gpio port by ajediday thingiverse use the bottom part of the case from the original, this is a new top piece.

thingiverse

free

Raspberry PI 4 Case with Lid for GPIO and 25mm fan by DonGat0

...s for fan optional: -2 m4 x 25mm or m4x10 screws for vesa mount designed for 10.5 mm fan height only used support on the gpio lid

thingiverse

free

Raspberry Pi case with large gpio access, raspberry camera slot and cpu hole by sunzi

...raspberry pi case with large gpio access, raspberry camera slot and cpu hole by sunzi thingiverse nt

thingiverse

free

Cover for Raspberry Pi 40-pin GPIO Connector by DougLorenz

...orenz thingiverse pretty simple item, sometimes you just want to have the 40 pin connector on your raspberry pi to be covered...

thingiverse

free

R-Pi case with GPIO access, SD-card tray, LED window by nap

...h a gpio access window on top (ideal for attaching jumper wires), a tray to guard the sd card and a small window to see the leds.

thingiverse

free

Raspberry Pi 2B/3B snap case with GPIO slots by Permethious

...s it together tightly. sd card slot gpio access top slot side io slot front io slots camera cable top slot display cable top slot

thingiverse

free

RPI4 case gpio led cam ribbon and sdcard windows by Manrod811

...er with 1.75 pteg. 20% infill. concentric suppports. 230 deg hotend 73 deg bed temp all other settings were pretty much standard.

thingiverse

free

Remix for GPIO ribbon cable opening - Raspberry Pi OctoPi Rig with 3.5" Adafruit Display

....5" display pcb, and an extension cable can be attached. github repo remix_thing_2160917_octopi_rig_top_ribbon_cable_opening

thingiverse

free

Raspberry Pi 400 (RPI400) GPIO Header Port Cover by VeGaSDeViL

... be useful for others too. probably would look quite nice with some red pla and match in but for functionality at least it works.

thingiverse

free

Raspberry Pi GPIO Connector That Works With the Makerbot Replicator 2 by blandman

...until it worked on my makerbot replicator 2. essentially all i did was make the holes a little bigger and thickened all 4 sides.

thingiverse

free

Sleeve for Raspberry Pi 3/2/B+ with camera and GPIO access by claancy

...ngs for removable mounting clips and brackets that fit this case. mounting bracket mounting clip for wanhao d6/monoprice ultimate

thingiverse

free

OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports by ChrisPetit

...ce files---base_rasp2base_rasp2_nut_m2.5base_rasp2_nut_m3lid mk2lid_mk3lid_mk3_nut_m2.5 v4lid_mk3_nut_m3 v1lid_nut_m2.5lid_nut_m3

thingiverse

free

One Piece Raspberry Pi Zero + Camera Case (GPIO support) by tnw513

... by tnw513 thingiverse simple mod to this excellent case: http://www.thingiverse.com/thing:1595429 please note: still not tested

thingiverse

free

Pi Zero V1.3 Slim (camera out and LED hole) 13*12HS GPIO screwless by nosrev

...rewless remix of soapibarzero: -for pi zero v1.3 -top/bottom made slim -screwless -camera out -13*12 heatsink -relocated led hole

thingiverse

free

NCD 4-Channel General Purpose SPDT Relay Shield + 4 GPIO with IoT Interface (NEW BOARD) by mrwire

...or ncd 4-channel general purpose spdt relay shield + 4 gpio with iot interface board size of board: 93mm x 93mm 3mm thickness lid

thingiverse

free

Raspberry Pi 3 (B/B+) Case (Top Cover) with 40mm Fan + GPIO access by CapuTech_96

...part from so here it is. if you like this model please send your makes and like this thing. have a nice day caputech_production

thingiverse

free

Alarm Light Relais Mounting Plate for Raspberry Pi GPIO by Leobj

... https://detail.tmall.com/item.htm?id=610763628092&spm=a1z09.2.0.0.763b2e8d7bgxpx&_u=c2os48inbc66&skuid=4474577667528

thingiverse

free

Raspberry Pi Leaf Keyring - GPIO Pin Label for your keys by phenoptix

... have been persuaded to cut some extras... http://www.phenoptix.com/collections/raspberry-pi/products/raspberry-pi-gpio-key-fob

thingiverse

free

Simple Raspberry Pi 4 Model B with GPIO Access (screwless/snap-fit)

...d it with 0.25mm layer height - worked well if you have any questions, suggestions or requests don't hesitate to let me know.

thingiverse

free

Safe & Secure Raspberry Pi B2 Case - Camera & GPIO Cable Slots by GlitchTech

...ld with the adafruit pi t-cobbler plus). this modification was a slot in the side and reducing the width of two interior columns.

thingiverse

free

Raspberry PI 4 Case (GPIO access, Fusion 360 model, Fan 30 and 40mm) by Olvin

...by m3 screw. camera holder deign see this model to open case push on back of the lid and pull up. lift gpio cover to gain access.

thingiverse

free

Raspberrypi Octoprint Controller Enclosure (w-GPIO Access) by Saboral

...th an appropriate bridging cable connector with a terminal box in the enclosure to clean up the overall design and manage cables.

thingiverse

free

Raspberry Pi Pico Case | full GPIO Access by TueftelTyp

...hing:4751199 unfortunately there is no access to the reset button so far, but this will be made up and added as soon as possible.

thingiverse

free

GPIO-Controlled Outlet Box for Octoprint by charlesodonnell

... electronic interference. i also created this lamp mounted on the cr10s 2020 extrusion: https://www.thingiverse.com/thing:4799111

thingiverse

free

Raspberry pi 4 + 3.5" screen case GPIO by mrtomich

...sion with more space for the bolts. remix of https://www.thingiverse.com/thing:1895374 but can't link in the remix section.

thingiverse

free

Raspberry Pi Model B Case with hole for cooling fan, GPIO pins, and camera port. by 3D4LIFE

...o keep it together. (courtesy of ogremills) but it also has a little latch thing to hold it together too. (probably paulgeneres)

thingiverse

free

Raspberry Pi Pico - Case | GPIO fully accessible - !ResetPin Updated! by TueftelTyp

...on so far, but this will be made up and added as soon as possible.updated 02.14.2021 as always, i would love to see your makes :)

thingiverse

free

PiKase - Raspberry Pi Case with orbit camera, GPIO cap and more... by Aegys3D

... a gpio cap and accept raspberry pi model a or b. the camera case has 2 outputs for the flexible flat cable. thanks and enjoy !

thingiverse

free

Shelly 1 GPIO Plug by RobClark56

... any connected sensor) is at ac-live voltage.☠️☠️ so never use this connector when the shelly1 is ac powered. dc power is ok. ⚠️

thingiverse

free

Sidewinder X1 Mounted Pi Sleeve w/ Camera and GPIO Slots

... wanted to be able to use it while having my camera plugged in, so i combined it with the top half of the sleeve made by asdfire.

thingiverse

free

Raspberry Pi B+/2 Case with cutouts for CAM/GPIO and Camera Mount by QuantumPhysGuy

...b+/2 sleeve with a camera mount. the images attached are the results of printing the model on a xyz da vinci 1.0 on good quality.

thingiverse

free

Camera+GPIO slot remix of Malolo's screw-less / snap fit customizable Raspberry Pi 4 hex mesh top by d3c0de

...camera+gpio slot remix of malolo's screw-less / snap fit customizable raspberry pi 4 hex mesh top by d3c0de thingiverse

thingiverse

free

Raspberry Pi case with click-on wall plate and slot for GPIO cable by philwild

...t results. just an update. this thing print well on a makerbot. the board fits snugly inside when fastened with the two screws.

thingiverse

free

Raspberry Pi Slim Case w/ Exposed GPIO by DougLorenz

... thing i have to think about is ventilation... latest print shows small problems with the cover... i'll be fixing that up...

thingiverse

free

Fan Lids with GPIO slots for raspberry pi 4 by dowhilegeek

...;d it onto the two fan lids. please refer to thing:4650578 for printing instructions, there is fairly specific settings for lids.

thingiverse

free

Raspberry Pi MHS 3.5 inch GPIO touch screen w/ case 50% angle stand by egeste

...ngiverse 50% angled stand for raspberry pi 4 with mhs 3.5 inch tft lcd touch screen. works great for octoprint/octopi/octoscreen

thingiverse

free

New tops for G0rki's RPi 3B case for easy camera cable and GPIO access by ChristophD

...modate easy access to the gpio ports (which i needed to power my neopixel jewel leds: https://www.thingiverse.com/thing:4708180).

thingiverse

free

One Piece Raspberry Pi Zero + Camera Case (with GPIO) + Raspberry pi logo by Timber1102

...ogo, so i made a version that featured it. (for some reason the remix function is not working so i just linked the original file)

thingiverse

free

Official 7" Raspberry Pi Screen Case by Jap_MK2

...o still be able to attach the ribbon/extension cable for gpios. but this should not be an issue, it still worked out pretty well.

thingiverse

free

Raspberry Pie Zero WH - Case with hole for cooling element and GPIO access by BSE

... one of the side clamps broke off. the bottom part remains unchanged. i just put it here so that you can print the complete case.

thingiverse

free

One Piece Raspberry Pi Zero + Camera Case (with GPIO) by Superrei

...sh more version later. so do follow this creation if you need bigger versions that can hold the gpio jumpers, camera or even hat.

thingiverse

free

PiMon Raspberry Pi 5" Monitor (HDMI & GPIO Access) by AlanC88

...tartech-feet-micro-usb-right-angle/b003ykx6wc/ref=sr_1_3?ie=utf8&qid=1490135181&sr=8-3&keywords=right+angle+micro+usb

thingiverse

free

PiTFT remix by MakersBox

...pitft remix by makersbox thingiverse added an opening for two of the gpio buttons.

thingiverse

free

Raspberry Pi 3 A+ Case with bigger GPIO hole and ventilation by dichalm

.../thing:922740 inspired by this case which unfortunately doesn't have an a+ version: https://www.thingiverse.com/thing:3719217

thingiverse

free

OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports and additional space for the NavoLabs POE hat by gheydon

...his case. the bases have had no changes done if you have already printed this from the original then there is no need to reprint.

thingiverse

free

PI CUBE ( octoprint) by madjack911

...r supply 5v 4a (pi4 / temp regulation / fan 40mm / esp8826 / led argb fan 120mm 12v 15a external led power supply screw m3 and m4

thingiverse

free

Full-Height Raspberry Pi Sleeve Case with CSI, DSI, & GPIO Holes by polysquare

...nk (exportable): https://cad.onshape.com/documents/0527f85374c3470f163b524c/w/44ee3ce6fee61d0f2862f97d/e/0fcbe309e023cd8c8b6efd02

thingiverse

free

Minimalistic Raspberry Mount 40mm Fan Free GPIO by staticcsonka

...e raspberry everywhere with 4 screws which i do not recommend since you should know which screws depending on your destination :)

thingiverse

free

Raspberry with Display by snoller

...it with the adafruit lcd-kit in mind (http://www.adafruit.com/products/772) that has a backplate and uses only the two gpio pins.

thingiverse

free

GPIO exposed Sleeve Case for Raspberry Pi B+ by esromneb

...ately i don't have a mostly empty spool so i was not able to test the 30mm size but i don't know why this won't work.

thingiverse

free

Raspberry pi controller by HunterM

...all and use the scratchgpio are on, (http://cymplecy.wordpress.com/2013/04/22/scratch-gpio-version-2-introduction-for-beginners/)

thingiverse

free

Cover for Raspberry Pi 40-pin GPIO Connector - UART pins exposed - GND and Pin1 indicators by rmpel

... 6-10". my answer is; because now i still have the option of either using or providing 5v from or to the pi on pins 4 and 6.

thingiverse

free

DeeBow-PiB+ Case by Deebow

...and down). features access to all ports including gpio and camera insert, with an optional cap to cover the gpio when not in use.

thingiverse

free

Raspberry Pi 4 Dual-40mm-Fan Exposed-GPIO Case by CubicMilliliter

...fans to blow inward onto the pi 4 as this appears to provide consistently better cooling than an "exhaust" orientation.

thingiverse

free

Relay Control Box - AC or other via USB or Raspberry PI GPIO Control

...the usb port turns on the relay and since 'in' is tied to ground, the relay closes and turns on power to the power strip.

thingiverse

free

Raspberry Pi Case with Mounting Bracket - NOGPIO by N42

...port closed. i don't use the gpio ports for my octoprint boxes, so i did this remix for a cleaner look in that application.

thingiverse

free

PI3-CASE minimal holes and 30mm Fan and no Mounts by azcoigreach

...ires and 1 of the vents. i installed a pimoroni blinkt on the gpio header which uses the newly removed gpio hole as a diffuser.