Z Rib for CR10 by TarantulaTevo

Last crawled date: 3 years, 1 month ago

I made mounts for M10 threaded rod as a z rib for the cr10. Works great, easy to print and to set up. There are tiny holes so you can drill the screws with a hex wrench. If you use other sizes, just drill the holes bigger
for one z rib you need:
M10x threaded rod 52mm long
4x M10 nuts
4x M10 washers
8 t-nuts
8 screws, that fit your t-nuts.
i used m5 t nuts and 10mm m5 schrews with countersunk head
have fun :)