Vice Versa V2 quadcopter (250mm) by shawdreamer

Last crawled date: 3 years, 1 month ago

frame hardware required:
30x m3x10mm hex head bolts
Electronics Ive used:
FC - CC3d V2.0
Esc - RacerStar 4in1 20Amp (Oneshot)
Rx - De-cased FlySky FS-R6B
Fpv - Eachine TX03 AIO cam
Motors - RacerStar BR2403 2300kv
Props - Racerstar 5051 Tri
All parts bought through BangGood.com with a cost total of - £76.15
Key features of design
Internal electronics (everything barring the battery is enclosed inside the main body, motors are also enclosed)
Lightweight (fully built with 1800mah 4s battery under 400g)
Durable (even using simple Natural coloured ABS the frame has survived multiple bumps and atleast two large crashes without breakages)
Flexible (much the same as the V1 version the battery can be mounted top or bottom of the frame to allow the free mounting of additional action cam on top)
Adaptable (enough space inside for multiple configuration options, can opt to use separate esc's and mini pcb or a 4in1 esc stacked with the FC as I have)
09/04/2017:
added new version of lower main body that allows for bolting right through the entire frame (arms and all) and securing with captive nuts on the base.
req.
12x m3x25mm bolts
12x m3 nuts
15/04/2017
added simple action cam mount (go-pro or clone)