Thingiverse
vacuumformer by frankjoosen
by Thingiverse
Last crawled date: 3 years, 1 month ago
The vaccumformer 2.0
This vacuumformer is designed to have easy acces to material that is suitable. Plastic plates are available in almost every store. The diameter of the plates is very common (220mm). The use of whole plates in stead of cut-outs is easier and the shrink nice around the object. I use a heat-gun to heat the plate and then let the vacuumcleaner do the rest.
DXF:
green = out of focus laserlines to create shallow, but relatively wide channels. These are needed to suck out all the air to the holes in the plate. It is lasercut first en then in the same position cut out the holes (given in black)
blue = 3,0mm plywood
black = 6,0mm plywood
movie:https://www.youtube.com/watch?v=W4B_owWT-cAhttps://youtu.be/j1ob3giVDnE
This vacuumformer is designed to have easy acces to material that is suitable. Plastic plates are available in almost every store. The diameter of the plates is very common (220mm). The use of whole plates in stead of cut-outs is easier and the shrink nice around the object. I use a heat-gun to heat the plate and then let the vacuumcleaner do the rest.
DXF:
green = out of focus laserlines to create shallow, but relatively wide channels. These are needed to suck out all the air to the holes in the plate. It is lasercut first en then in the same position cut out the holes (given in black)
blue = 3,0mm plywood
black = 6,0mm plywood
movie:https://www.youtube.com/watch?v=W4B_owWT-cAhttps://youtu.be/j1ob3giVDnE
Similar models
thingiverse
free
Arduino Plate
...be positioned vertically and has more holes
plate-v02
plate-base-v02-3mm (for 3 mm plywood)
plate-base-v02-4mm (for 4 mm plywood)
grabcad
free
Wooden plywood chair.
... plywood chair.
grabcad
idea was to create a chair out of plywood, to be cut out using cnc.
currently only .iges file available.
thingiverse
free
Gen6 Electronics Mount Plate by drstock
...rap. it was designed to be cut on a laser cutter out of 3mm acrylic or plywood, but it should be easy to cut on a cnc router too.
grabcad
free
Fender Stratocaster Pickguard HSS 11 holes
...ll find a severe tone change and strange resonance and high frequency boost.
i recommend you make these out of vinyl or plywood.
3dwarehouse
free
Plywood Cutting Table
...plywood cutting table
3dwarehouse
plywood / sheet goods fold out cutting table. woodworking, workshop cutting table.
3dwarehouse
free
Reptile Cage
...hole for the heating lamp need to be cut out of the top piece. plexiglass and hardware required. plywood measures 1/8' thick.
thingiverse
free
low voltage bracket by lilfonzy
...ket by lilfonzy
thingiverse
low voltage bracket
use 6/32 screws for the arms
small hole in the plate are for marking the cut out
grabcad
free
plywood bottom 2
...plywood bottom 2
grabcad
a small, more cut part of the original plate just used for the lower part of the arms
thingiverse
free
FT-5 Adjustable Glass holder by nselimis
... hole loosely.
also the hole that the bed screw goes though is deliberately tight to allow the screw to thread into the plastic.
thingiverse
free
Small easel for plates or pictures. by stickben
...se out. the slot is large and sloppy so that you can adjust the angle of the limbs. can easily be adapted to 1/4" plywood.
Frankjoosen
thingiverse
free
Cup with a build-in straw by frankjoosen
...cup with a build-in straw by frankjoosen
thingiverse
a drinking cup with a straw build-in.
thingiverse
free
Rubberband gun by frankjoosen
...ine, after sanding (sandpaper) the corners of the most outher layers. otherwise the rubberbands tend to stuck.
enjoy the design
thingiverse
free
Iphoto-Frame by frankjoosen
...n turn it to 2d drawings for lasercutting. guess what? it works great!!!
suitable for iphone4(s). remix if you please.
enjoy.
thingiverse
free
pen case by frankjoosen
...e made up of 6mm plywood.
two notches are made the keep the lid closed. the green elastic band just looks nice.
have fun with it.
thingiverse
free
Keychain-Phone stand by frankjoosen
...etter to something else of course.
the little hole is to hang you're keys on a nail or something like that.
have fun with it.