U-NAS NSC-800 1u PSU to FlexATX Adapter by Newlin

Last crawled date: 3 years, 4 months ago

The 1u power supply died in my NAS and I was only able to find inexpensive, quiet FlexATX PSUs at the time. In come this pair of adapters which allows a flexATX PSU to mount into the case. The U-NAS NSC-800
The first adapter allows the FlexATX supply to fit in the 1u PSU cut out on the rear of the case. The second piece supports the rear of the shorter power supply and bolts into existing locations.
The smaller holes will allow standard hard drive mounting screws to thread in and the larger ones will allow an M3 nut to be inserted, it is a tight fit. Using a soldering iron to heat the nut lets it sink into place easily.
There are indents to allow the heads of m3 bolts to sit flush with the surface.
This was designed with my case in mind but the rear plate should work with other cases that have a cut out of a 1u power supply only.