Two-part Drumstick Holder (6–8 drumsticks)

Last crawled date: 4 years, 3 months ago

A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks (a smaller version for 4 drumsticks is available here). It clamps onto the tubing using M6x40 mm bolts (4 pcs in total) and standard M6 hex nuts (10 mm span of the nut flats) that are inserted into the hexagonal slots from the inside of the holder. The clamping bracket is the same for both the ring and the cup so you will need to print the same part twice.
Designed to print vertically (as shown in the renders) without supports. I suggest printing one mounting bracket first, test fitting it onto your rack tube and then adjusting the scale for the rest of the parts if necessary.