Thingiverse
ThreadedRodSpoolHolder by peddiparth
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a simple threaded rod and ball bearing spool holder.
Adjist the bearing distance based on the spool size.
Use one of the other rod holder designs to hold the threaded rod after placing the filament spool on the bearings.
Adjust the spool holder distance to stop the spool from falling off the bearings.
If the spool holder distance can not be adjusted, just print the two disks, and secure the disks with nuts on the threaded rod to keep the spool in place.
Adjist the bearing distance based on the spool size.
Use one of the other rod holder designs to hold the threaded rod after placing the filament spool on the bearings.
Adjust the spool holder distance to stop the spool from falling off the bearings.
If the spool holder distance can not be adjusted, just print the two disks, and secure the disks with nuts on the threaded rod to keep the spool in place.
Similar models
thingiverse
free
1/4" threaded rod SPOOL HOLDER for Fusion Reach Printer by Reach3D_Nate_Rogers
...ol holder using 1/4" threaded rod, 1/4" -20 nuts, r4zz bearings and some washers. adjustable to the width of the spool.
thingiverse
free
Flashforge Creator Pro Filament Holder by airmamaf
...ed rod inside the big screw.
you'll need to turn the screw holder onto the threaded rod in order to manually make the thread.
thingiverse
free
Simple Filament Spool Holder for 608 Bearing and 8mm threaded rod by davidm84
...le filament spool holder for 608 bearing and 8mm threaded rod by davidm84
thingiverse
super simple spool holder for 608 bearing.
thingiverse
free
P3Steel horizontal spool holder
... p3steel frame. needs two bearings, some washers, nuts and some bolt or threaded rod. adjust tightness by tightening the top nut.
thingiverse
free
M8 threaded rod Spool holder by zomtronic
...omtronic
thingiverse
spool holder assembled from m8 threaded rod, 3d printed wheels and washers.
ball bearing from roller skates
thingiverse
free
Fancy Spool Holder by BHillam
...
thingiverse
an unnecessarily fancy spool holder. spool width is adjustable using an m10 threaded rod. an m8 rod will also work.
thingiverse
free
20x20 Vslot Spool End Mount by Kwelldrin
...slot end mount to hold a m8 theaded rod for a spindle for the spool holder. added 4x 608z bearings to hold threaded rod in place.
thingiverse
free
Cone Hub for SPANNERHANDS Spool System by mmdoogie
...e easier to get everything into the box. you'd need two 8mm diameter x 2mm thick disk magnets to glue into the little inset.
thingiverse
free
Spool Holder for Prusa i3 Printer by craindowl
...wo 4 mm holes in spool_holder_1.stl is 2 cm. i used two 20 cm m8 threaded rod, one 37 cm m8 threaded rod and two bearings sw z809
thingiverse
free
M3D Spool Holder with Bearing Support by mamodom
...ool holder with bearing support by mamodom
thingiverse
i designed this spool holder to avoid the need of a threaded rod and nuts
Peddiparth
thingiverse
free
motor flexible coupler updated with openscad by peddiparth
... coupler updated with openscad by peddiparth
thingiverse
this is a motor coupler design updated with openscad.
make it your own.
thingiverse
free
King Cobra tricopter base by peddiparth
... out the "tricopter base for us" design in this version.
i am going to print it solid with 3 outer layers for rigidity.
thingiverse
free
AirConception Nitro 200 button guard by peddiparth
...riend michael swain, but was in inch scale that did not translate well to mm.
i edited the model in openscad to its current form.
thingiverse
free
Shorter belts using a belt tensioner by peddiparth
.... use a the zip tie belt tensioner to substitute the other half of belt with something you pulled from an old printer or scanner.
thingiverse
free
Face Shield PETG for laser cutting by peddiparth
...-rc2https://prusa3d.com/downloads/others/covid19_shield_foil.pdfhttps://prusa3d.com/downloads/others/covid19_shield_foil_long.pdf
thingiverse
free
Side Fan mount for 40mm fans by peddiparth
... for holding the extruder in place.
the hole width for fan is set to 30mm, so it will hold a 40mm fan easily at a 45degree angle.
thingiverse
free
Gear360 SmoothQ Osmo mount by peddiparth
...ee improved derivatives of this design.
openscad file is available for customization.
youtube video: https://youtu.be/r9uqb-gotwy
thingiverse
free
Air Conception Titanium Race frame 2 leg buffers by peddiparth
...amotor with titanium race 2 150 frame and 140 props.
the larger frame pokes into my calf muscles, so this is a buffer i designed.
thingiverse
free
Enlarged Cable Chain Laser End elongated and rotated by peddiparth
...e is attached so that you can elongate the part as much as you want.
if you make any changes, do share them with the community :)