Thingiverse
Tantillus a3 by leonal
by Thingiverse
Last crawled date: 3 years, 1 month ago
The tantillus a2 printer has a limited build volume (10cm10cm10cm) , so I plan to build this one - a3 , this one have the build volume of 16cm16cm16cm, this will cover most use cases for 3d printing hobbyist.
I use corner connectors instead of top and bottom panels in tantillus a2 , this is because the top panel make maintenance difficult (tighten cable, replace hotend, etc). for all other components , download from tantillus a2 (http://www.thingiverse.com/thing:480860), they can be reused in a3 version, (x y robs , carriage robs and z screw thread need to be in different length although).
Printed Parts List:
Printed Parts Number STL name URL
Carriage top 1 carriage_top.stl http://www.thingiverse.com/thing:480860
Carriage bottom 1 carriage_bottom.STL http://www.thingiverse.com/thing:480860
Bowden clamp 1 bowden_clamp_od4.stl http://www.thingiverse.com/thing:480860
Z upper bracket 1 z_upper_bracket.stl http://www.thingiverse.com/thing:480860
Z motor bracket 1 z_motor_bracket.stl http://www.thingiverse.com/thing:480860
Z lift bracket 1 z_lift_modified.stl http://www.thingiverse.com/thing:480860
Z lift_enstop_plate 1 z_lift_enstop_plate.stl http://www.thingiverse.com/thing:480860
M6 nut adapter 2 m6.stl http://www.thingiverse.com/thing:480860
Z arm left 1 Z_arm_1.stl http://www.thingiverse.com/thing:480860
Z arm right 1 Z_arm_2.stl http://www.thingiverse.com/thing:480860
XY ends (2 left 2 right) 1 x_y_end_all.stl http://www.thingiverse.com/thing:480860
Corner Connector 8 corner3_m5_c20.stl http://www.thingiverse.com/thing:1520640
Extruder
Extruder body 1 compact_direct_drive_extruder.stl http://www.thingiverse.com/thing:605101
Extruder idler 1 idler.stl http://www.thingiverse.com/thing:605101
M6 nut adapter 1 m6.stl http://www.thingiverse.com/thing:605101
Optional
belt cover inner 2 belt_cover_inner.stl http://www.thingiverse.com/thing:480860
belt cover outside 2 belt_cover_outside.stl http://www.thingiverse.com/thing:480860
spool holder 40mm long 1 spool_40mm.stl http://www.thingiverse.com/thing:480860
spool holder 60mm long 1 spool_60mm.stl http://www.thingiverse.com/thing:480860
I use corner connectors instead of top and bottom panels in tantillus a2 , this is because the top panel make maintenance difficult (tighten cable, replace hotend, etc). for all other components , download from tantillus a2 (http://www.thingiverse.com/thing:480860), they can be reused in a3 version, (x y robs , carriage robs and z screw thread need to be in different length although).
Printed Parts List:
Printed Parts Number STL name URL
Carriage top 1 carriage_top.stl http://www.thingiverse.com/thing:480860
Carriage bottom 1 carriage_bottom.STL http://www.thingiverse.com/thing:480860
Bowden clamp 1 bowden_clamp_od4.stl http://www.thingiverse.com/thing:480860
Z upper bracket 1 z_upper_bracket.stl http://www.thingiverse.com/thing:480860
Z motor bracket 1 z_motor_bracket.stl http://www.thingiverse.com/thing:480860
Z lift bracket 1 z_lift_modified.stl http://www.thingiverse.com/thing:480860
Z lift_enstop_plate 1 z_lift_enstop_plate.stl http://www.thingiverse.com/thing:480860
M6 nut adapter 2 m6.stl http://www.thingiverse.com/thing:480860
Z arm left 1 Z_arm_1.stl http://www.thingiverse.com/thing:480860
Z arm right 1 Z_arm_2.stl http://www.thingiverse.com/thing:480860
XY ends (2 left 2 right) 1 x_y_end_all.stl http://www.thingiverse.com/thing:480860
Corner Connector 8 corner3_m5_c20.stl http://www.thingiverse.com/thing:1520640
Extruder
Extruder body 1 compact_direct_drive_extruder.stl http://www.thingiverse.com/thing:605101
Extruder idler 1 idler.stl http://www.thingiverse.com/thing:605101
M6 nut adapter 1 m6.stl http://www.thingiverse.com/thing:605101
Optional
belt cover inner 2 belt_cover_inner.stl http://www.thingiverse.com/thing:480860
belt cover outside 2 belt_cover_outside.stl http://www.thingiverse.com/thing:480860
spool holder 40mm long 1 spool_40mm.stl http://www.thingiverse.com/thing:480860
spool holder 60mm long 1 spool_60mm.stl http://www.thingiverse.com/thing:480860
Similar models
thingiverse
free
Tantillus a4 by leonal
..._40mm.stl http://www.thingiverse.com/thing:480860
spool holder 60mm long 1 spool_60mm.stl http://www.thingiverse.com/thing:480860
thingiverse
free
Tantillus a2 by leonal
...com/thing:1520640 and tantillus a4:http://www.thingiverse.com/thing:1791109 , it is still in processing, need your contribution:)
thingiverse
free
Extruder for Tantillus A2 by leonal
...d printer. it can be used with 3mm filament or 1.75mm filament , make use of the m6 nut adapter if you are using 1.75mm filament.
thingiverse
free
excenter nut for anet a2 by cetinekin
...et a2 by cetinekin
thingiverse
needed to repair the extruder plate with this carriage
https://www.thingiverse.com/thing:1680866
thingiverse
free
Tantillus XP by cyryllo
...tantillus xp by cyryllo
thingiverse
my mod for tantillus a2 from http://www.thingiverse.com/thing:480860
more soon!
thingiverse
free
Brackets for TEVO Tarantula - Single/Dual Z mod by Elzariant
...) : http://www.thingiverse.com/_msa_/designs
bruce walker (bdwalker1) : http://www.thingiverse.com/bdwalker1/designs
doron shalev
thingiverse
free
Anycubic Kossel Extruder Top Rail Bracket by richardhopton
...thing:865929) - i fitted the extruder to the top rail with the bowden tube pointing down. this bracket holds the extruder solid.
thingiverse
free
tantillus e3d v6 duo mount by leonal
...us e3d v6 duo mount by leonal
thingiverse
so you can mount 2 e3d hotend in tantillus , tantillus a2, tantillus a3, tantillus a4
thingiverse
free
Spool adapter remix by Ovaljed
...46122
hardware needed.
1- 5/16 x 6" carriage bolt
2- washers for carriage bolt
1- nut for carriage bolt
2-608 skate bearings
thingiverse
free
Tantillus X and Y Ends for GT2 Belts by Dignen
...for gt2 belts by dignen
thingiverse
these let you use gt2 belts on a tantillus. use with http://www.thingiverse.com/thing:359346
Leonal
thingiverse
free
Extruder for Tantillus A2 by leonal
...d printer. it can be used with 3mm filament or 1.75mm filament , make use of the m6 nut adapter if you are using 1.75mm filament.
thingiverse
free
tantillus e3d v6 duo mount by leonal
...us e3d v6 duo mount by leonal
thingiverse
so you can mount 2 e3d hotend in tantillus , tantillus a2, tantillus a3, tantillus a4
thingiverse
free
Filament Spool Holder for 40mm or 60mm Spool - Tantillus by leonal
...on , for 1.0kg filament spool, you can use 60mm version. these two type spool holder i'm using with tantillus a2 3d printer.
thingiverse
free
Tantillus a2 by leonal
...com/thing:1520640 and tantillus a4:http://www.thingiverse.com/thing:1791109 , it is still in processing, need your contribution:)
thingiverse
free
Tantillus a4 by leonal
..._40mm.stl http://www.thingiverse.com/thing:480860
spool holder 60mm long 1 spool_60mm.stl http://www.thingiverse.com/thing:480860
Tantillus
thingiverse
free
Tantillus XP by cyryllo
...tantillus xp by cyryllo
thingiverse
my mod for tantillus a2 from http://www.thingiverse.com/thing:480860
more soon!
thingiverse
free
tantillus e3d v6 duo mount by leonal
...us e3d v6 duo mount by leonal
thingiverse
so you can mount 2 e3d hotend in tantillus , tantillus a2, tantillus a3, tantillus a4
thingiverse
free
Tantillus a2 by leonal
...com/thing:1520640 and tantillus a4:http://www.thingiverse.com/thing:1791109 , it is still in processing, need your contribution:)
thingiverse
free
Tantillus SDRamps Clip by Tjhj
...lus sdramps clip by tjhj
thingiverse
a clip to mount the sd ramps on the tantillus out of the way and gain the clearance needed.
thingiverse
free
Tantillus Leg by ggenter
...e) which can be used on it's own or with vibration dampener (http://www.thingiverse.com/thing:94279)
print without support.
thingiverse
free
Tantillus E3D mount by edwell
...dwell
thingiverse
a carriage that enables you to mount an e3d hotend (or similar 16mm grove mount hotend) to a tantillus printer
thingiverse
free
Tantillus Filament Tube Holder by ggenter
...printer. it is designed to fit custom middle-front connector of printed tantillus case (http://www.thingiverse.com/thing:1085479)
thingiverse
free
Tantillus carriage - LM8UU bushings by 3dmakers
...tp://www.thingiverse.com/thing:45379
video:https://youtu.be/z_ull9sghvihttps://youtu.be/5nhwxrucoqihttps://youtu.be/cmm5tfqtobq
thingiverse
free
Tantillus R by toolson
...german): http://forums.reprap.org/read.php?336,818009
forums thread (international): http://forums.reprap.org/read.php?279,817116
thingiverse
free
Home sensor for Tantillus by AlainMouette
...he acrilic version (which i bought from http://www.indiegogo.com/tantillus) which requires no modification to the original parts.
A3
3ddd
$1
AUDI A3 2007
...audi a3 2007
3ddd
audi , a3
audi a3 2007
3ddd
free
Botero A3
...botero a3
3ddd
botero , masiero
современный бра botero a3. моделил по фото.
design_connected
$13
A3 Stool
...a3 stool
designconnected
gubi a3 stool computer generated 3d model. designed by lorey, paul.
3ddd
$1
Slipper Bath A3
...slipper bath a3
3ddd
toto
slipper bath a3
turbosquid
$25
AUG A3
...uid
royalty free 3d model aug a3 for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1563951)
3d_export
$39
Samsung Galaxy A3 and A3 Duos Black 3D Model
...ellphone smartphone cellular high detailed photoreal vray hdri
samsung galaxy a3 and a3 duos black 3d model nongon 93820 3dexport
3d_export
$39
Samsung Galaxy A3 and A3 Duos White 3D Model
...ellphone smartphone cellular high detailed photoreal vray hdri
samsung galaxy a3 and a3 duos white 3d model nongon 93861 3dexport
3d_export
$39
Samsung Galaxy A3 and A3 Duos Silver 3D Model
...llphone smartphone cellular high detailed photoreal vray hdri
samsung galaxy a3 and a3 duos silver 3d model nongon 94016 3dexport
turbosquid
$39
Asteroid-A3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$26
Audi A3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.