Thingiverse
Tabletop Base 28 mm by Markusx26
by Thingiverse
Last crawled date: 3 years, 1 month ago
Tabletop Base 65 x 65 cm
Sliced in 9 seperate plates:
Heli Plate 25 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 17 Hours
Bunker Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 17 Hours
Wachturm/Guard Tower Plate 20 x 20 cm, No Support, Infill 15%, 0,2 mm, ca. 18 Hours
Rocket Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 28 Hours
Building Plate 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Hours
Teleporter Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 24 Hours
Front Left Plate 20 x 20 cm, Support 15 %, Infill 15%, 0,2 mm, ca. 20 Hours
Front Right Plate 20 x 20 cm, Support 15%, Infill 15%, ca. 24 hours
Front Middle Plate 25 x 20 cm , No Support, 15% Infill, 0,2 mm, ca. 13-16 Hours
Two Versions ara available, for details check gallery.
Street Lamps: Take these here, insert LED and drill your holes as needed.https://www.thingiverse.com/thing:2064924
Main Gate for Front Middle Plate, Two Versions ara available. Pictures in Gallery for assembly. Glue together and add attachments as you want.
Maingate Version 1 is a Remix of Snowman77https://www.thingiverse.com/thing:2458437
Industrial Terrain for Front left/right plates 25 x 25 cm, No Support, min. 30% Infill, ca. 11 hours. It´s a Remix of pw_jamesonhttps://www.thingiverse.com/thing:2246090
For the deck take 4 decktiles and combine them together. Take the Riser you like, there are other Versions available. You need 2 decks (made with 4 tiles combined), 6 Riser, 6 Handbars, 1-2 Ladder or stairs. Or more if you want. Total print volume is about 25x25 and use 30% or more infill cause the parts are very fin and break easier. Print these parts in horizontal for better strength after print.
For the bunker (https://www.thingiverse.com/thing:1777153, Slice/Middle Part double to fit for Plate), the guard tower (Here: https://www.thingiverse.com/thing:1877658) , the ruined building (Here: https://www.thingiverse.com/thing:1369886) you need to search on Thingiverse for "Tabletob" or "Wargaming" then you find the files for the big things on the plates. You need to slice these files before the print, cause they are only scanned. If recommened i can upload also the files for the buildings if needed.
Different Gunships i found on Thingiverse for Warhammer© Base:
Storm Eagle (Rear End: https://www.thingiverse.com/thing:2487921 ; Front End: https://www.thingiverse.com/thing:2538713) on the pictures
Warhammer 40k © Remix (https://www.thingiverse.com/thing:2347747)
Albatros Gunship (https://www.thingiverse.com/thing:1120219)
Better Cockpit and Rockets (https://www.thingiverse.com/thing:2317388)
Thunderhawk Gunship (https://www.thingiverse.com/thing:680007) Maybe too big for the base. Check scale before print with Heli Plate (25x25 cm).
In total (with buildings, alternate Plates and Maingates) you need about 3 kg PLA and 14 days print time for all. But in the shop i think you would pay for the plastic ca. 500 Euro, instead you can print a base for 60 Euro and Energy Cost. You don´t lose the small deko stuff the next time you go to an event. Or the bad players in stores who maybe steal such small stuff. Not here, it´s all on the plates.
Working on more stuff for base. So check out.....
NEW: https://www.thingiverse.com/thing:2656480
Lizenz Disclaimer: I used only Thingeverse stuff i could find which is FREE.
I don´t have the time to write down here all 50+ Sources for the hole project.
So thanks to all creators here, but why should i write down each of you in my project and none of you writes my name in his projekt. If you don´t want that people print your stuff make Lizenz models. And please don´t compare a "Mini" Projekt with a 3,5 kg/4 Weeks projekt. This is a bigger dimension when you build this. Can´t find something similar here.
The name Warhammer ©, ... are licensed names under Games Workshop ©. I didn´t scanned any stuff, used only Things from Thingiverse. This is an unofficial project not under offizial lizenz of Games Workshop. The rest is completely unique designed to fit with original Space Marines ©, ... from Games Workshop ©. It should also fit on the standard 48x72 playground. If Games Workshop © disagree, please contact me.
Tabletop Basis 65 x 65 cm
Aufgeteilt auf 9 Einzelplatten + Aufbauten siehe unten
Heli Platte 25 x 25 cm, kein Support, 0,2 mm, ca. 17 Hours
Bunker Platte 20 x 25 cm, kein Support, 0,2 mm, ca. 17 Std
Turm Platte 20 x 20 cm, kein Support, 0,2 mm, ca. 18 Std
Rocket Platte 20 x 25 cm, kein Support, Infill 15%, 0,2 mm, ca. 28 Std
Building Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Std
Teleporter Platte 20 x 25 cm, kein Support, Infill 15%, 0,2 mm, ca. 24 Std
Vorne Links Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Std
Vorne Rechts Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mmca. 24 Std
Vorne Mitte Platte 25 x 20 cm, kein Support, Infill 15%, 0,2 mm, ca. 13-16 Std
Es sind zwei Versionen vorhanden, siehe Gallerie.
Strassenlampen: Nehmt diese Vorlage und bohrt euch Löcher wie benötigt.https://www.thingiverse.com/thing:2064924
Haupttor für Vorne Mitte Platte. 2 Versionen online, Bilder für Details und Bauanleitung zum zusammen kleben siehe Gallery.
Maingate Version 1 ist ein Remix von Snowman77https://www.thingiverse.com/thing:2458437
Industrial Terrain für vorne links/rechts 25 x 25 cm, no Support, Infill mind. 30%
Ist ein Remix von pw_jamesonhttps://www.thingiverse.com/thing:2246090
Für das Deck links/rechts einfach 4 Tiles aneinander legen und in 3D Builder zusammen führen. Nehmt die Riser welche euch gefallen, sind noch mehrere Versionen da. Insgesamt braucht Ihr mind. 6x Riser, 2x Decks (aus je 4 Decktiles), 6 Handbars, 1-2 Ladder or Stairs. Druckgröße ca. 25 x 25 cm. Infill würde ich mind. 30% nehmen, da die Leitern und Riser sehr fragil sind und nicht gleich brechen sollen und liegend drucken für größere Stabilität.
Für den Bunker (Quelle: https://www.thingiverse.com/thing:1777153; Slicen und Mittelstück doppelt nehmen damit es auf Platte passt), Wachturm (Quelle: https://www.thingiverse.com/thing:1877658) und Ruine (Quelle: https://www.thingiverse.com/thing:1369886) müsst Ihr auf Thingeverse nach "Tabletop" oder "Wargaming" suchen, dann findet Ihr die Dateien für die Einzelgebäude. Ihr müsst die Vorlagen aber noch slicen, denn die sind nur gescannt oder nicht hohl vorhanden. Falls gewünscht kann ich noch die Dateien für die Gebäude hoch laden.
Verschiedene Fluggeräte die mit der Warhammer Base funktionieren:
Storm Eagle (Hinter Teil: https://www.thingiverse.com/thing:2487921 ; Vorderer Teil: https://www.thingiverse.com/thing:2538713) auf den Bildern
Warhammer 40k © Remix (https://www.thingiverse.com/thing:2347747)
Albatros Gunship (https://www.thingiverse.com/thing:1120219)
Besseres Cockpit und Raketen (https://www.thingiverse.com/thing:2317388)
Thunderhawk Gunship (https://www.thingiverse.com/thing:680007) Vielleicht zu groß für die Base. Erst mit der Heli Plate (25x25 cm) vergleichen.
Im Gesamten (mit Gebäuden und alternativ Platten, Haupttor) braucht Ihr ca. 3 kg Material und ca. 14 Tage zum drucken. Habe meine ganzen PLA Reste verdruckt und dabei auf das Projekt gekommen. Das Suchen / Zusammen stellen inkl. Druckzeit hat bis jetzt ca. 4 Wochen benötigt. Im Laden müsstet Ihr mit Sicherheit ca. 500 Euro ausgeben fürs Plastik, hier könnt Ihr euch für 60 Euro plus Strom eine Base drucken. Beim nächsten Event könnt Ihr einfach auspacken/aufstellen und verliert/vergesst nicht den ganzen Kleinkram. Hier ist alles fest auf der Platte bis auf die Aufbauten.
Mit Sicherheit auch interessant für den Einsatz im Tabletop Geschäft. Einfache Lagerung im Karton, schnell auf- und abgebaut, geringe Diebstahl Gefahr bei Kleinteilen und die sind gerade teuer.
Arbeite noch weiter an anderen Platten zum Austausch. Also einfach mal vorbei schauen.... :-)
NEU: https://www.thingiverse.com/thing:2656480
Lizenz Hinweis: Ich habe nur freie Vorlagen von Thingiverse verwendet.
Ich habe nicht die Zeit alle 50+ Quellen hier auf zu listen samt aller Namen.
Also "Danke" an alle Creator hier, aber wieso soll ich hier zig Leute in mein Projekt schreiben und Ihr schreibt mich aber nicht in euer Projekt? Noch nicht davon zu sprechen dass der Text dann nur noch aus Links zu lauter fremden Projekten besteht. Wenn es euch stört, macht kostenpflichtige Vorlagen über gewisse Plattformen, ansonsten dürft Ihr nichts hoch laden.
Und bitte vergleicht nicht ein "Mini" Projekt mit einem 3,5 kg/4 Wochen Projekt. Finde nichts ähnliches hier auf Thingeverse und online bei Games Workshop. Es gibt keine modulare Base dort zu kaufen bzw. online zu finden.
Die Namen Warhammer © usw. sind eingetragene Warenzeichen von Games Workshop ©. Das ist ein inoffizielles Projekt welches vpn mir nicht kommerziell zu Geld gemacht wird. Die Projekt ist aus vielen Vorlagen anderer User zusammen gestellt worden. Ich habe keine Gegenstände von Games Workshop eingescannt. Sollte Games Workshop hier nicht über einstimmen, bitte Kontakt aufnehmen. Leider kann ich nicht den Detailgrad eines Original Teils auf einen 3D Drucker erreichen. Für optimale Details müsst Ihr euch original Ware (Spritzguss) von Games Workshop © kaufen. Aber es gibt ja noch Feilen, Dremel, Schleifpapier,.... um Alterungsspuren zu machen.
Sliced in 9 seperate plates:
Heli Plate 25 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 17 Hours
Bunker Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 17 Hours
Wachturm/Guard Tower Plate 20 x 20 cm, No Support, Infill 15%, 0,2 mm, ca. 18 Hours
Rocket Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 28 Hours
Building Plate 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Hours
Teleporter Plate 20 x 25 cm, No Support, Infill 15%, 0,2 mm, ca. 24 Hours
Front Left Plate 20 x 20 cm, Support 15 %, Infill 15%, 0,2 mm, ca. 20 Hours
Front Right Plate 20 x 20 cm, Support 15%, Infill 15%, ca. 24 hours
Front Middle Plate 25 x 20 cm , No Support, 15% Infill, 0,2 mm, ca. 13-16 Hours
Two Versions ara available, for details check gallery.
Street Lamps: Take these here, insert LED and drill your holes as needed.https://www.thingiverse.com/thing:2064924
Main Gate for Front Middle Plate, Two Versions ara available. Pictures in Gallery for assembly. Glue together and add attachments as you want.
Maingate Version 1 is a Remix of Snowman77https://www.thingiverse.com/thing:2458437
Industrial Terrain for Front left/right plates 25 x 25 cm, No Support, min. 30% Infill, ca. 11 hours. It´s a Remix of pw_jamesonhttps://www.thingiverse.com/thing:2246090
For the deck take 4 decktiles and combine them together. Take the Riser you like, there are other Versions available. You need 2 decks (made with 4 tiles combined), 6 Riser, 6 Handbars, 1-2 Ladder or stairs. Or more if you want. Total print volume is about 25x25 and use 30% or more infill cause the parts are very fin and break easier. Print these parts in horizontal for better strength after print.
For the bunker (https://www.thingiverse.com/thing:1777153, Slice/Middle Part double to fit for Plate), the guard tower (Here: https://www.thingiverse.com/thing:1877658) , the ruined building (Here: https://www.thingiverse.com/thing:1369886) you need to search on Thingiverse for "Tabletob" or "Wargaming" then you find the files for the big things on the plates. You need to slice these files before the print, cause they are only scanned. If recommened i can upload also the files for the buildings if needed.
Different Gunships i found on Thingiverse for Warhammer© Base:
Storm Eagle (Rear End: https://www.thingiverse.com/thing:2487921 ; Front End: https://www.thingiverse.com/thing:2538713) on the pictures
Warhammer 40k © Remix (https://www.thingiverse.com/thing:2347747)
Albatros Gunship (https://www.thingiverse.com/thing:1120219)
Better Cockpit and Rockets (https://www.thingiverse.com/thing:2317388)
Thunderhawk Gunship (https://www.thingiverse.com/thing:680007) Maybe too big for the base. Check scale before print with Heli Plate (25x25 cm).
In total (with buildings, alternate Plates and Maingates) you need about 3 kg PLA and 14 days print time for all. But in the shop i think you would pay for the plastic ca. 500 Euro, instead you can print a base for 60 Euro and Energy Cost. You don´t lose the small deko stuff the next time you go to an event. Or the bad players in stores who maybe steal such small stuff. Not here, it´s all on the plates.
Working on more stuff for base. So check out.....
NEW: https://www.thingiverse.com/thing:2656480
Lizenz Disclaimer: I used only Thingeverse stuff i could find which is FREE.
I don´t have the time to write down here all 50+ Sources for the hole project.
So thanks to all creators here, but why should i write down each of you in my project and none of you writes my name in his projekt. If you don´t want that people print your stuff make Lizenz models. And please don´t compare a "Mini" Projekt with a 3,5 kg/4 Weeks projekt. This is a bigger dimension when you build this. Can´t find something similar here.
The name Warhammer ©, ... are licensed names under Games Workshop ©. I didn´t scanned any stuff, used only Things from Thingiverse. This is an unofficial project not under offizial lizenz of Games Workshop. The rest is completely unique designed to fit with original Space Marines ©, ... from Games Workshop ©. It should also fit on the standard 48x72 playground. If Games Workshop © disagree, please contact me.
Tabletop Basis 65 x 65 cm
Aufgeteilt auf 9 Einzelplatten + Aufbauten siehe unten
Heli Platte 25 x 25 cm, kein Support, 0,2 mm, ca. 17 Hours
Bunker Platte 20 x 25 cm, kein Support, 0,2 mm, ca. 17 Std
Turm Platte 20 x 20 cm, kein Support, 0,2 mm, ca. 18 Std
Rocket Platte 20 x 25 cm, kein Support, Infill 15%, 0,2 mm, ca. 28 Std
Building Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Std
Teleporter Platte 20 x 25 cm, kein Support, Infill 15%, 0,2 mm, ca. 24 Std
Vorne Links Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mm, ca. 20 Std
Vorne Rechts Platte 20 x 20 cm, Support 15%, Infill 15%, 0,2 mmca. 24 Std
Vorne Mitte Platte 25 x 20 cm, kein Support, Infill 15%, 0,2 mm, ca. 13-16 Std
Es sind zwei Versionen vorhanden, siehe Gallerie.
Strassenlampen: Nehmt diese Vorlage und bohrt euch Löcher wie benötigt.https://www.thingiverse.com/thing:2064924
Haupttor für Vorne Mitte Platte. 2 Versionen online, Bilder für Details und Bauanleitung zum zusammen kleben siehe Gallery.
Maingate Version 1 ist ein Remix von Snowman77https://www.thingiverse.com/thing:2458437
Industrial Terrain für vorne links/rechts 25 x 25 cm, no Support, Infill mind. 30%
Ist ein Remix von pw_jamesonhttps://www.thingiverse.com/thing:2246090
Für das Deck links/rechts einfach 4 Tiles aneinander legen und in 3D Builder zusammen führen. Nehmt die Riser welche euch gefallen, sind noch mehrere Versionen da. Insgesamt braucht Ihr mind. 6x Riser, 2x Decks (aus je 4 Decktiles), 6 Handbars, 1-2 Ladder or Stairs. Druckgröße ca. 25 x 25 cm. Infill würde ich mind. 30% nehmen, da die Leitern und Riser sehr fragil sind und nicht gleich brechen sollen und liegend drucken für größere Stabilität.
Für den Bunker (Quelle: https://www.thingiverse.com/thing:1777153; Slicen und Mittelstück doppelt nehmen damit es auf Platte passt), Wachturm (Quelle: https://www.thingiverse.com/thing:1877658) und Ruine (Quelle: https://www.thingiverse.com/thing:1369886) müsst Ihr auf Thingeverse nach "Tabletop" oder "Wargaming" suchen, dann findet Ihr die Dateien für die Einzelgebäude. Ihr müsst die Vorlagen aber noch slicen, denn die sind nur gescannt oder nicht hohl vorhanden. Falls gewünscht kann ich noch die Dateien für die Gebäude hoch laden.
Verschiedene Fluggeräte die mit der Warhammer Base funktionieren:
Storm Eagle (Hinter Teil: https://www.thingiverse.com/thing:2487921 ; Vorderer Teil: https://www.thingiverse.com/thing:2538713) auf den Bildern
Warhammer 40k © Remix (https://www.thingiverse.com/thing:2347747)
Albatros Gunship (https://www.thingiverse.com/thing:1120219)
Besseres Cockpit und Raketen (https://www.thingiverse.com/thing:2317388)
Thunderhawk Gunship (https://www.thingiverse.com/thing:680007) Vielleicht zu groß für die Base. Erst mit der Heli Plate (25x25 cm) vergleichen.
Im Gesamten (mit Gebäuden und alternativ Platten, Haupttor) braucht Ihr ca. 3 kg Material und ca. 14 Tage zum drucken. Habe meine ganzen PLA Reste verdruckt und dabei auf das Projekt gekommen. Das Suchen / Zusammen stellen inkl. Druckzeit hat bis jetzt ca. 4 Wochen benötigt. Im Laden müsstet Ihr mit Sicherheit ca. 500 Euro ausgeben fürs Plastik, hier könnt Ihr euch für 60 Euro plus Strom eine Base drucken. Beim nächsten Event könnt Ihr einfach auspacken/aufstellen und verliert/vergesst nicht den ganzen Kleinkram. Hier ist alles fest auf der Platte bis auf die Aufbauten.
Mit Sicherheit auch interessant für den Einsatz im Tabletop Geschäft. Einfache Lagerung im Karton, schnell auf- und abgebaut, geringe Diebstahl Gefahr bei Kleinteilen und die sind gerade teuer.
Arbeite noch weiter an anderen Platten zum Austausch. Also einfach mal vorbei schauen.... :-)
NEU: https://www.thingiverse.com/thing:2656480
Lizenz Hinweis: Ich habe nur freie Vorlagen von Thingiverse verwendet.
Ich habe nicht die Zeit alle 50+ Quellen hier auf zu listen samt aller Namen.
Also "Danke" an alle Creator hier, aber wieso soll ich hier zig Leute in mein Projekt schreiben und Ihr schreibt mich aber nicht in euer Projekt? Noch nicht davon zu sprechen dass der Text dann nur noch aus Links zu lauter fremden Projekten besteht. Wenn es euch stört, macht kostenpflichtige Vorlagen über gewisse Plattformen, ansonsten dürft Ihr nichts hoch laden.
Und bitte vergleicht nicht ein "Mini" Projekt mit einem 3,5 kg/4 Wochen Projekt. Finde nichts ähnliches hier auf Thingeverse und online bei Games Workshop. Es gibt keine modulare Base dort zu kaufen bzw. online zu finden.
Die Namen Warhammer © usw. sind eingetragene Warenzeichen von Games Workshop ©. Das ist ein inoffizielles Projekt welches vpn mir nicht kommerziell zu Geld gemacht wird. Die Projekt ist aus vielen Vorlagen anderer User zusammen gestellt worden. Ich habe keine Gegenstände von Games Workshop eingescannt. Sollte Games Workshop hier nicht über einstimmen, bitte Kontakt aufnehmen. Leider kann ich nicht den Detailgrad eines Original Teils auf einen 3D Drucker erreichen. Für optimale Details müsst Ihr euch original Ware (Spritzguss) von Games Workshop © kaufen. Aber es gibt ja noch Feilen, Dremel, Schleifpapier,.... um Alterungsspuren zu machen.
Similar models
thingiverse
free
C Profil Nutstein für C Profil Schiene by teamholz
...m.com/team.holz/
achtung!
für schäden keine haftung! drucke und verwende die teile nicht, wenn du damit nicht einverstanden bist.
thingiverse
free
Crane for Tabletop Garage / Presentation Display by Markusx26
...uss) von games workshop © kaufen. aber es gibt ja noch feilen, airbrush, dremel, schleifpapier,.... um alterungsspuren zu machen.
thingiverse
free
Bosch Professional 18v Akku Mount by teamholz
... wenn du damit nicht einverstanden bist.
print settings
printer:
alfawise u30
rafts:
no
supports:
yes
resolution:
0.2
infill:
20%
thingiverse
free
Einkaufswagendieb by teamholz
...m.com/team.holz/
achtung!
für schäden keine haftung! drucke und verwende die teile nicht, wenn du damit nicht einverstanden bist.
thingiverse
free
Ritzel Bodendüse für Bosch BCH65PET und alle anderen BCH. by Leggy
...thingiverse.com/thing:2851142 sind noch die dichtlippe und die röllchen!
gear for the brushmotor of bosch battery vacuum cleaner.
thingiverse
free
LECOM LED Panel Holder by K3Design85
... like da, beim download klappt es ja auch ;)
ausdruck erfolgt auf eigene gefahr !!! maße können von drucker zu drucker abweichen.
thingiverse
free
KC87/Z9001 Modulgehäuse by bartfox
...ne verantwortung, da ich bisher keine brauchbaren druckeinstellungen gefunden habe und die größe noch nicht 100%ig testen konnte.
thingiverse
free
BIXLER - FPV - DJI FPV AIR UNIT by JoHuVo
...giverse.com/thing:347191/files
die remix-nr. konnte thingiverse nicht finden. sorry
verstehe nicht, warum das nicht funktioniert.
thingiverse
free
Rollbrett L-Boxx by achwarumnicht
... ( https://www.hornbach.de/shop/transport-geraete-lenkrolle-bis-35-kg-36-x-50-x-15-mm/6644776/artikel.html ) verbaut
gruß
michael
thingiverse
free
Siedler von Catan - Grundplatte für das Tableau für den Stadtausbau bei für Städte und Ritter by Themoik
...d to print it without rafts because i didn't have enough space on the printer, but it would be good to use brim, if possible.
Markusx26
thingiverse
free
Chillum Diffusor by Markusx26
... 9 mm
just a quick project to put down the preasure in the chillum when in use
and to get a better cooling/mixing with the water.
thingiverse
free
Wellenadapter for Speed Tank by Markusx26
...europa the wellenadapter for the 11 z ritzel from 3,17 mm to 5 mm. couldn´t find something here, so i made one. should also work.
thingiverse
free
Lipo Holder for Speed Tank by Markusx26
...lipo´s.
arbeite am speed tank und jeder benutzt nur kabelbinder zum befestigen. habe daher einen halter für den 2s akku gemacht.
thingiverse
free
Connector for Speed Tank by Markusx26
...you around 60-70 degree angle between the two tank parts.
i modified the original base plate and the front plate with connectors.
thingiverse
free
Spider Tank Remix Movable Legs by Markusx26
...e main gun. the body is the second file. take the original tower, basket and machine gun from the original.
hope you like it. :-)
thingiverse
free
Crane for Tabletop Garage / Presentation Display by Markusx26
...uss) von games workshop © kaufen. aber es gibt ja noch feilen, airbrush, dremel, schleifpapier,.... um alterungsspuren zu machen.
thingiverse
free
Tabletop Repair / Presentation Dock by Markusx26
...e (spritzguss) von games workshop © kaufen. aber es gibt ja noch feilen, dremel, schleifpapier,.... um alterungsspuren zu machen.
thingiverse
free
Remix of Star Farer from Star Citizens by Markusx26
...https://www.thingiverse.com/thing:2702291
pilot (https://www.thingiverse.com/thing:1761697)
legs and weapons from my last remixes
Tabletop
archibase_planet
free
Tabletop
...tabletop
archibase planet
rostrum platform stage
tabletop lecturn- 3d model for interior 3d visualization.
3ddd
$1
Tabletop Washbasin
...tabletop washbasin
3ddd
tabletop
modern design of tabletop washbasin
3d_export
$5
TABLETOP GREENHOUSE
...tabletop greenhouse
3dexport
tabletop greenhouse with accessories
turbosquid
free
Tabletop Decor
...urbosquid
free 3d model tabletop decor for download as blend on turbosquid: 3d models for games, architecture, videos. (1634208)
3ddd
$1
Mika White Tabletop
...mika white tabletop
3ddd
mika white tabletop ventless ethanol fireplace
turbosquid
$20
tabletop radio
...d model tabletop radio for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1167277)
turbosquid
free
Tabletop Sign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Tabletop 3D Model
...odel
archive3d
rostrum platform stage
tabletop lecturn- 3d model for interior 3d visualization.
3ddd
free
Bench Vise Clamp Tabletop
...bench vise clamp tabletop
3ddd
тиски
bench vise clamp tabletop
turbosquid
$10
Ivanhoe Tabletop Lamp
... ivanhoe tabletop lamp for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1411186)
28
3d_export
$15
rocks 28
...rocks 28
3dexport
rocks 3d model 28
turbosquid
$12
28
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Bed 28
...bed 28
3ddd
постельное белье
bed 28
i hope you like it
3ddd
$1
Hope-28
...hope-28
3ddd
r&l
люстра hope-28
2013,2016.max+ obj
vray
turbosquid
$60
Nieupurt 28
...osquid
royalty free 3d model nieupurt 28 for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1206282)
turbosquid
$20
Curtains 28
...osquid
royalty free 3d model curtains 28 for download as max on turbosquid: 3d models for games, architecture, videos. (1333749)
turbosquid
$15
Decor 28
...urbosquid
royalty free 3d model decor 28 for download as stl on turbosquid: 3d models for games, architecture, videos. (1678243)
turbosquid
$6
Bedcloth 28
...osquid
royalty free 3d model bedcloth 28 for download as max on turbosquid: 3d models for games, architecture, videos. (1522758)
turbosquid
$2
BMK-28
...
turbosquid
royalty free 3d model bmk-28 for download as max on turbosquid: 3d models for games, architecture, videos. (1441075)
turbosquid
$79
City 28
...id
royalty free 3d model city 28 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1460817)
Mm
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
mm lampadari
mm lampadari
бра
люстра
3ddd
$1
MM lampadari
...mm lampadari
3ddd
mm lampadari
lampa mm lampadari,art.
3ddd
$1
MM lampadari
...mm lampadari
3ddd
mm lampadari
lustra mm lampadari,art.
3ddd
free
MM lampadari
...mm lampadari
3ddd
mm lampadari
bra mm lampadari,art.
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
mm lampadari
люстра от фабрики mm lamparadi.арт:7032/8 размеры:а (d 72 x h37 см)
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
lampadari
mm lampadari, 5972/12+6 1700x1800h
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
mm lampadari
настольная лампа (высота - 52 см)
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
mm lampadari
бра от фабрики mm lamparadi.арт:. 7032/a1 размеры:(l 16 x h 27 x sp 27 см)
3ddd
$1
MM Lampadari
...mm lampadari
3ddd
mm lampadari
люстра с рассеивателем из стекла
и позолоты и металлической арматурой
3ddd
$1
MM LAMPADARI 6578
...mm lampadari 6578
3ddd
mm lampadari
торшер mm lampadari 6578/lt3+1 v2172
Base
archibase_planet
free
Base
...base
archibase planet
base column column base
base 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column column base
base 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
base column base column
base 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base ionic - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Base
...base
archibase planet
foundation base
column base tuscan - 3d model (*.gsm+*.3ds) for interior 3d visualization.
design_connected
$18
Base
...base
designconnected
tom dixon base computer generated 3d model. designed by dixon, tom.