Thingiverse
T-Piece Ø22mm PVC Pipe - V3- OPTIMISED by bathrobotics
by Thingiverse
Last crawled date: 3 years, 1 month ago
Continued:
Generation 3 (Gen3) of the Southern Pipe Fitting Method. More Updates to follow.
I could make one of these, certify it to all the standards, and be 100% confident that it is safe. But that would be mine, printed on my printer, acetone vapour bathed in my coffee machine, not yours.
I can't vouch for the quality of your build. That's something you'll have to do.
Ok, I've not seen anyone do plumbing or pipework of practical use, so I'm claiming this as the modestly named Southern Method. Using a single material home printer and Printing the pipes at 45° WITHOUT SUPPORT MATERIAL to print bed allows finished pipe profiles to be round rather than "teardrops" shapes to prevent the materials collapsing in on itself at the top.
First rule of plumbing club, you don't mess with systems you don't understand.
Second rule of plumbing club, YOU DON'T MESS WITH SYSTEMS YOU DON'T UNDERSTAND(!)
Every modification will take as long as it takes.
1 system per mod,
If this is your first night at Plumbing Club, you've got to plumb.
This is intended for low pressure return pipes for grey water at approximately room temperature. Do not use on Gas (Propane, LPG, Butane, Domestic Gas supplies, or any combustable media). Do not use on hot water or central heating systems (temp >40°C ; If you do not understand what ">" or "°C" means, don't use this part!). Do not use on macerated sewage. Do not use in temps close to 0°C. Do not use under floorboards or similar situations where it cannot be seen, monitored or changed easily. This design is not suitable for use in Nuclear Power Stations or Satellite Applications.
Basically, use this sensibly. I've used similar in hydroponics, and it works at low pressure (102KPa / 1ATM - if you don't know what a KPa is, or what 1 ATM is, please don't use this design).
I'm saying "Grey Water Systems Only" - but that's an ass covering statement, if you feel your build is safe enough to use on other systems, I'm not your keeper. I'm just an idiot.
This is based on previous design
X-Connector (Ø22mm 4 Way) http://www.thingiverse.com/thing:689782http://www.thingiverse.com/thing:639743http://www.thingiverse.com/thing:650329http://www.thingiverse.com/thing:653890http://www.thingiverse.com/thing:656548
Similar technique used in:
Nescafe Nesspresso Espresso Milk Nozzlehttp://www.thingiverse.com/thing:649314
Enjoy:
EUR ING Andy Southern
Bath Roboticshttps://www.thingiverse.com/bathrobotics/about
Generation 3 (Gen3) of the Southern Pipe Fitting Method. More Updates to follow.
I could make one of these, certify it to all the standards, and be 100% confident that it is safe. But that would be mine, printed on my printer, acetone vapour bathed in my coffee machine, not yours.
I can't vouch for the quality of your build. That's something you'll have to do.
Ok, I've not seen anyone do plumbing or pipework of practical use, so I'm claiming this as the modestly named Southern Method. Using a single material home printer and Printing the pipes at 45° WITHOUT SUPPORT MATERIAL to print bed allows finished pipe profiles to be round rather than "teardrops" shapes to prevent the materials collapsing in on itself at the top.
First rule of plumbing club, you don't mess with systems you don't understand.
Second rule of plumbing club, YOU DON'T MESS WITH SYSTEMS YOU DON'T UNDERSTAND(!)
Every modification will take as long as it takes.
1 system per mod,
If this is your first night at Plumbing Club, you've got to plumb.
This is intended for low pressure return pipes for grey water at approximately room temperature. Do not use on Gas (Propane, LPG, Butane, Domestic Gas supplies, or any combustable media). Do not use on hot water or central heating systems (temp >40°C ; If you do not understand what ">" or "°C" means, don't use this part!). Do not use on macerated sewage. Do not use in temps close to 0°C. Do not use under floorboards or similar situations where it cannot be seen, monitored or changed easily. This design is not suitable for use in Nuclear Power Stations or Satellite Applications.
Basically, use this sensibly. I've used similar in hydroponics, and it works at low pressure (102KPa / 1ATM - if you don't know what a KPa is, or what 1 ATM is, please don't use this design).
I'm saying "Grey Water Systems Only" - but that's an ass covering statement, if you feel your build is safe enough to use on other systems, I'm not your keeper. I'm just an idiot.
This is based on previous design
X-Connector (Ø22mm 4 Way) http://www.thingiverse.com/thing:689782http://www.thingiverse.com/thing:639743http://www.thingiverse.com/thing:650329http://www.thingiverse.com/thing:653890http://www.thingiverse.com/thing:656548
Similar technique used in:
Nescafe Nesspresso Espresso Milk Nozzlehttp://www.thingiverse.com/thing:649314
Enjoy:
EUR ING Andy Southern
Bath Roboticshttps://www.thingiverse.com/bathrobotics/about
Similar models
thingiverse
free
Ø22mm Straight Coupling - ABS only, Acetone Vapour Bathe recommended. by bathrobotics
...close to 0°c. do not use under floorboards or similar situations where it cannot be seen, monitored or changed...
thingiverse
free
4-Way X Pipe Fitting (Ø22mm Pipe Solvent Weld) print in ABS and Vapour Bath by bathrobotics
...close to 0°c. do not use under floorboards or similar situations where it cannot be seen, monitored or changed...
thingiverse
free
Pipe Extender (ø22mm Solvent Weld) - Print in ABS and Acetone Vapour Bathe. (UNTESTED -PERMANENT) by bathrobotics
...close to 0°c. do not use under floorboards or similar situations where it cannot be seen, monitored or changed...
thingiverse
free
90° bend for Ø22mm PVC Pipe Weld -Better Support by bathrobotics
...weld -better support by bathrobotics thingiverse superceeded: https://www.thingiverse.com/thing:4241654 very similar to the previous 90° ø22mm pipe bend, except this...
thingiverse
free
T-Piece for Ø22mm PVC pipe - pipe weld when using ABS by bathrobotics
...close to 0°c. do not use under floorboards or similar situations where it cannot be seen, monitored or changed...
thingiverse
free
90° Ø22mm Pipe Elbow (World First) - shorter build height ABS PVC Pipe Weld by bathrobotics
...close to 0°c. do not use under floorboards or similar situations where it cannot be seen, monitored or changed...
thingiverse
free
90° Ø22mm elbow for ABS to PVC Pipe Weld (World First) by bathrobotics
...on its way!http://www.thingiverse.com/thing:650329 -laying downhttp://www.thingiverse.com/thing:656548 -better version new t-piece!http://www.thingiverse.com/thing:653890 similar technique used in: nescafe nesspresso espresso milk nozzlehttp://www.thingiverse.com/thing:649314 only...
thingiverse
free
90° Pipe Weld Angle Optimised by bathrobotics
...it, redesign it, just don't write "bob's elbow" ofr similar on it and re-upload it. print it i don't...
thingiverse
free
Puzzle Ball 3D Jigsaw Repair Splint by bathrobotics
...print out and glue piece together with this or similar license: "here's the source files, i don't give a...
grabcad
free
Fake Adidas
... doing for, i don't know what to use it for. but maybe it will work for you. maybe you can prank your friends. i do not know.
Ø22Mm
thingiverse
free
Sealing for pipe ø22mm by Sevilfer
...om maker's muse
3d printing with flexible filaments (on stock hardware!) - 3dp101
https://www.youtube.com/watch?v=ftjz6vmvtj8
thingiverse
free
Bike air pump mounting bracket by jvvelar
...mounting bracket by jvvelar thingiverse it fits air pump ø22mm ...
thingiverse
free
Fidget Spinner (Ninja Design) by KackBoon
...spinner (ninja design) by kackboon thingiverse fidget spinner for ø22mm x ø8mm x 7mm...
thingiverse
free
Fidget Spinner (Reaper Design V2) by KackBoon
...design v2) by kackboon thingiverse fidget spinner for bearings ø22mm x ø8mm x...
thingiverse
free
Fidget Spinner (Reaper Design V3) by KackBoon
...design v3) by kackboon thingiverse fidget spinnner for bearings ø22mm x ø8mm x...
thingiverse
free
Universal spool holder with bearings Spulenhalter by Punikedas
...for the anet a8 spool holder frame. (bearings: di=ø8mm, da=ø22mm ...
thingiverse
free
Ø22mm Straight Coupling - ABS only, Acetone Vapour Bathe recommended. by bathrobotics
...//www.thingiverse.com/thing:689782
enjoy:
eur ing andy southern
bath roboticshttps://www.thingiverse.com/bathrobotics/about
thingiverse
free
Handlebar extension for bike by SirHOT
...extension for bike by sirhot thingiverse you need : ø22mm x 80-100mm pipe (you can print) m4 10 screw...
thingiverse
free
90° bend for Ø22mm PVC Pipe Weld -Better Support by bathrobotics
... tightness yet. -soon. that's what the tear holes are for, so i can dangle above a vat of boiling acetone.
cheers,
-andy.
Bathrobotics
thingiverse
free
Solar Cell from eBay by bathrobotics
...solar cell from ebay by bathrobotics
thingiverse
solar cell
thingiverse
free
A Test Piece by bathrobotics
...e by bathrobotics
thingiverse
see how accurately your printer can print this 210mm cube block.
remember to print at 100% fill.
thingiverse
free
hobbed drive (dummy) by bathrobotics
...rect modelling personal edition (which is free).
please also see my dummy stepper motor:https://www.thingiverse.com/thing:1757165
thingiverse
free
QR Pressure- Coupling by bathrobotics
...by bathrobotics
thingiverse
a sketch model, don't print, maybe use as a design aid or something to scare small animals with.
thingiverse
free
Clip for Batman Belt Buckle by bathrobotics
...ttp://www.thingiverse.com/thing:680736
enjoy.
-as,
ceng.
aka bath robotics.
http://www.thingiverse.com/bathrobotics/about
thingiverse
free
Bendy Straw Model (Do Not Print!) by bathrobotics
... attach to recent designs.
enjoy,
eur ing andy southern,
aka
bathrobotics
http://www.thingiverse.com/bathrobotics/about
thingiverse
free
Nokia_battery_holder_pepperpot_version by bathrobotics
...acetone to melt the abs to glue.
run the wires through the holes that are split in half.
nokia-batteryholder.
for a 5c battery(?)
thingiverse
free
Washer retainer by bathrobotics
...it's been made, used and proven.
it was designed for a very specific reason, in my own time, and printed on my own printer.
thingiverse
free
Ball Bearing 5x10x4 MR105ZZ by bathrobotics
...zz by bathrobotics
thingiverse
wednesday 22nd april 2015:
ball bearing 5x10x4 mr105zz.
specific for a design i wish to make.
thingiverse
free
Bamboo Flute End Piece by bathrobotics
...t'll be printed in red.
enjoy.
eur ing andy southern.
aka bath robotics
http://www.thingiverse.com/bathrobotics/about
Optimised
3d_ocean
$39
Kyoto City Japan Asset Pack
...historical houses japan japanese theme kyoto low poly lowpoly optimised sakura shrine statue towers trees looking for a super...
3d_export
free
Set of Lamps
...set of lamps
3dexport
set of high poly lamps<br>no optimisation, just scene
3d_export
$39
Dragon 3D Model
...dragon 3d model 3dexport low poly animated flying dragon optimised for game engines dragon 3d model elv1s 25022...
3d_export
$8
Office Chair Low Polygon 3D Model
...game ready office chair desk low polygon office chair optimised for game...
3d_export
$10
HMNLB Fire Extinguisher 3D Model
...model 3dexport fire extinguisher hmnlb fireman vray 3ds max optimised foam safety photorealistic detailed materials hmnlb fire extinguisher 3d...
3d_export
$10
roll on deoderant
...roll-on deoderant stick. antipersperant. includes roller ball, lid and screwfit.<br>optimised for games. textures and materials included in blender file.<br>made...
3d_export
$5
vitamin container
...a vitamin d container, includes high details in an optimised poly framework<br>includes the lid and a label.<br>blender file with...
3d_ocean
$3
Realistic Pool Water Texture
...real world size : 150 cm² file formats : optimised .jpeg...
3d_ocean
$15
Car Wheel
...wheel composed of 20223 (160495) polygons, the file is optimised for c4d and is provided in these different formats...
3d_ocean
$12
iPhone 5 - Realistic model
...be placed in any scene, and it comes with optimised v-ray materials. modeled in 3ds max 2010. the model...
V3
3d_export
$5
Poison-v3
...poison-v3
3dexport
poison-v3
3ddd
$1
Curtain v3
...curtain v3
3ddd
полупрозрачная штора v3
turbosquid
free
v3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
potato v3
...potato v3
3dexport
turbosquid
$69
Skeletor v3
...royalty free 3d model skeletor v3 for download as ztl and obj on turbosquid: 3d models for games, architecture, videos. (1712713)
turbosquid
$49
Zombie v3
...
royalty free 3d model zombie v3 for download as obj and ztl on turbosquid: 3d models for games, architecture, videos. (1342458)
turbosquid
$2
Bitcoin v3
...
royalty free 3d model bitcoin v3 for download as c4d and prj on turbosquid: 3d models for games, architecture, videos. (1182845)
turbosquid
$29
Turret V3
...alty free 3d model turret v3 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1217498)
turbosquid
$20
Radiators v3
... free 3d model radiators v3 for download as max, max, and obj on turbosquid: 3d models for games, architecture, videos. (1607437)
turbosquid
$10
Wheel V3S
...e 3d model wheel v3s for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1344250)
Pvc
turbosquid
$39
pvc window
...bosquid
royalty free 3d model pvc window for download as max on turbosquid: 3d models for games, architecture, videos. (1205578)
turbosquid
$19
window PVC
...bosquid
royalty free 3d model window pvc for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1204830)
turbosquid
$15
PVC Band
...turbosquid
royalty free 3d model pvc band for download as ma on turbosquid: 3d models for games, architecture, videos. (1287079)
turbosquid
$3
Pvc taping
...bosquid
royalty free 3d model pvc taping for download as max on turbosquid: 3d models for games, architecture, videos. (1161550)
turbosquid
$1
PVC elbow
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
PVC Fittings
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PvC Window
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Pvc cabinet
... pvc cabinet for download as blend, dae, fbx, obj, stl, and x on turbosquid: 3d models for games, architecture, videos. (1669537)
turbosquid
$10
PVC PIPE FITTING
...d
royalty free 3d model pvc pipe fitting for download as skp on turbosquid: 3d models for games, architecture, videos. (1164250)
turbosquid
$17
Glass PVC Table
...ee 3d model glass pvc table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1267063)
Pipe
3d_ocean
$3
Pipe
...pipe
3docean
pipe
a high quality pipe with high resolution texture
archibase_planet
free
Pipe
...pipe
archibase planet
pipe conduit piping tubing
pipe unit polymix n210411 - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$2
Pipes
...pipes
3docean
pipes
a high quality pipes which are ready to use in interiros and contains shader.
3d_export
$10
pipes
...dexport
pipes set – 3d models of a oil pipes for your games/media productions. these are low polygonal models, easy to assemble.
archibase_planet
free
Tobacco pipe
...bacco pipe
archibase planet
tobacco pipe pipe tobacco-pipe
tobacco pipe n020312 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$7
Smoking Pipe - E-pipe
...g pipe - e-pipe for download as 3ds, lwo, obj, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1188985)
archibase_planet
free
Tobacco-pipe
...tobacco-pipe
archibase planet
tobacco-pipe pipe
tobacco-pipe n030312 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
Pipe
...pe
turbosquid
royalty free 3d model pipe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1143449)
turbosquid
$7
pipe
...pe
turbosquid
royalty free 3d model pipe for download as prj on turbosquid: 3d models for games, architecture, videos. (1374588)
turbosquid
$2
Pipe
...
turbosquid
royalty free 3d model pipe for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1214323)
Piece
archibase_planet
free
Piece
...piece
archibase planet
sand-box playground
piece 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Piece
...piece
archibase planet
smithy forge farriery
piece 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$7
piece
...turbosquid
royalty free 3d model piece for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1407696)
archibase_planet
free
Piece
...piece
archibase planet
merry-go-round roundabout carrousel
piece 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
Lego piece
...lego piece
3dexport
lego piece<br>.stl
turbosquid
free
Chess Pieces
...es
turbosquid
free 3d model chess pieces for download as fbx on turbosquid: 3d models for games, architecture, videos. (1502330)
turbosquid
$5
Skywalk Piece
...quid
royalty free 3d model skywalk piece for download as max on turbosquid: 3d models for games, architecture, videos. (1422588)
turbosquid
$1
chess pieces
...squid
royalty free 3d model chess pieces for download as obj on turbosquid: 3d models for games, architecture, videos. (1562332)
turbosquid
$1
chess piece
...osquid
royalty free 3d model chess piece for download as fbx on turbosquid: 3d models for games, architecture, videos. (1369649)
turbosquid
free
Chess Pieces
...uid
royalty free 3d model chess pieces for download as blend on turbosquid: 3d models for games, architecture, videos. (1323069)
T
design_connected
$11
T & T
...t & t
designconnected
dark t & t computer generated 3d model. designed by de ryck, christophe.
3d_export
$5
t-800
...t-800
3dexport
t-800
3ddd
$1
Table T
...table t
3ddd
журнальный
table t
3ddd
free
T-Rex
...t-rex
3ddd
t-rex
rrrrrr
3d_export
$5
t-virus
...t-virus
3dexport
it's t-virus
3d_export
$5
T-26T
...t-26t
3dexport
artillery tractor on the t-26 chassis ussr
3ddd
$1
T 45
...t 45
3ddd
t-45
кабинет руководителя t 45
12 предметов
подробнее:http://www.prezident-mebel.ru/index.php?productid=1541
3ddd
free
SAFE T
...safe t
3ddd
огнетушитель
креативные огнетушители от компании safe t
3d_export
free
t-rex
...t-rex
3dexport
t-rex have normal map and base color textures
3d_export
$75
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958