Star Trek Ascendancy Organizer - All Expansions by SlappyWhite

Last crawled date: 4 years, 2 months ago

This organizer is designed to print with a .8 nozzle .4 and .2 will work fine as well. The box is extremely tight. I've allowed about .5mm play between all the boxes so make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick on the outside and .8mm thick on the inside. If using a .8 nozzle enable Print Thin Walls.
This organizer will hold Star Trek Ascendancy and all the expansions. It is designed to have 2 use some parts of the organizer as play aids to organize the play space and spread out the components. The exploration tray, race trays, component trays, and space lane trays are designed to enhance play to make access to components easy and keep things organized. The planet tray has a a slot in the bottom to allow the box top to fit without bulging.
!!!Warning!!! this design will use almost 2kg of filament, it's a monster
Print the following
1 x Advancements Tray
1 x Borg Tray
1 x Card Tray
2 x Component Tray
2 x Dashboard Tray
1 x Exploration Tray
1 x Planet Tray
7 x Race Tray
2 x Space Lane Tray
1 x Spacer Tray
Enjoy!