Thingiverse
Smoothieboard facia mount by d3delta3d
by Thingiverse
Last crawled date: 3 years ago
Mount for Smoothieboard. This one bolts in place between the floor and base plates which are space 100mm apart. It uses 2 x 40mm fans to cool the underside of the board cool.
the 2 suports bolt to the board using M3 cap screws that cut their own thread through the plastic. The facia mount uses 2 x M3 cap scews and nuts to secure the board.
the 2 suports bolt to the board using M3 cap screws that cut their own thread through the plastic. The facia mount uses 2 x M3 cap scews and nuts to secure the board.
Similar models
thingiverse
free
Azteeg X3 Mount by timbo
...
i fixed to my printer first using m5 bolts thru the air holes in the back. just have to do this first before mounting the board.
thingiverse
free
80mm fan mount by vegeta882004
...882004
thingiverse
mounted on a 2020 extrusion on the frame with 2 m3 tnuts and bolts
uses a 80x80mm fan to cool the motherboard
thingiverse
free
CR-10 Mount for Xiaomi Mi Home 1080P 360 Camera
...om pc/smartphone/tablet.
2 x m5 x 20 mm bolts
2 x m5 cap nuts
2 x m3 x 16 mm bolts
2 x m3 nuts
2 x m4 x 10 mm bolts
2 x m4 t-nuts
thingiverse
free
Bigtreetech SKR V1.4 Mount for 2040 Extrusion
...to fit my eryone thinker s but should fit similar style printers as well as long as there is...
thingiverse
free
Tiny Stuff for RepRap by onepointdiy
...river knob.
2: anti-rotation parts of m3 nut.
(for original t=2mm heat bed plate)
3: mount of 25*25mm cooling fan for main board.
thingiverse
free
Reprap Full Graphic LCD housing by d3delta3d
...a 45º angle to make viewing easy.
the front cover is help on with 2 x m3 x 16mm cap screws and nuts and 2 x m3 x 25 cap screws.
thingiverse
free
Ramps mount 2020 by trimex
... the possibility to install the fan 40mm.
bolt m3 x 25mm - 3 (ramps bolt)
bolt m3 x 20mm - 2 (bolt for 11mm fan width)
nut m3 - 5
thingiverse
free
Cooling for FLsun Cube with Cyclops 40mm fan by Kaidk
...mm
mount at the 2 m4x16 bolts, that holds the bearings for x-axis, the opposite end of the extruder. change the 2 bolts to m4x20.
thingiverse
free
Bigtreetech SKR v1.3 Board Compact Case
...ase
assembly
m3 tap on four corner holes.
mount the board using m3 8mm bolts.
cover the front and back covers using m3 8mm bolts.
thingiverse
free
Duet 2 & Duex Control Boards Mounts For The Railcore II by quadcells
...
4 m3 nylon or fiber washers for mounting the board to the mount.
2 m2 x 4mm button head bolts for securing the fan to the mount.
D3Delta3D
thingiverse
free
Air Knife by d3delta3d
...iverse
pneumatic air knife with r1/4" connection . can be used for drying parts or blowing off items from a conveyor belt.
thingiverse
free
Retraction / Ooze Test Models by d3delta3d
...d3delta3d
thingiverse
simple model to the retraction settings of your extruder. there is a 2 post and 4 post version available.
thingiverse
free
Linihser crowned tracking roller by d3delta3d
...a3d
thingiverse
designed to suit 2" wide abbrasive belts. bearings used are 3203 on either side to suit a 1/2" shaft.
thingiverse
free
Speedplay 1.5º cleat wedge by d3delta3d
...suit speedplay pedals. i recommend using the stainless steel carbon sole protector over the wedge or the cleat will cut into it.
thingiverse
free
Tripod Mount for Phone by d3delta3d
...d.
comes with 2 tripod base mount styles, one designed to be tapped with a 1/4" tap and one to insert a 1/4" nut into.
thingiverse
free
Malibu Floating Wedge by d3delta3d
...n as the .stl file is real size.
if you want a wedge that can tilt up and down let me know and i will modify and add the files.
thingiverse
free
SHF-16 linear shaft support by d3delta3d
...d3delta3d
thingiverse
shf-16 shaft support for 16mm diamter linear shaft. to complete is need an m4x16 cap screw and an m4 nut.
thingiverse
free
SHF12 Linear shaft support by d3delta3d
...uit 12mm rod. i am using them to support the linear rods on the delta printer i am building http://d3delta3d.blogspot.com.au/
thingiverse
free
linisher platen idler roller by d3delta3d
...r roller designed to use 2 x 3203 bearings and 12mm shaft. designed to suit 2" belts and is 2" diameter x 52mm wide.
thingiverse
free
SPD-SL 1.5º cleat wedge by d3delta3d
...wedge by d3delta3d
thingiverse
1.5º cleat wedge to suit shimano spd-sl cleats. just print more than 1 if you need more wedging.
Smoothieboard
thingiverse
free
Smoothieboard by TrinityLabs
...smoothieboard by trinitylabs
thingiverse
just a smoothieboard model for making mounts or cases.
thingiverse
free
Smoothieboard Model by tpra
...n a smoothieboard 5c. (smoothie 4c is the exact same, except there's 4 motor connectors instead of 5 and a few less mosfets).
thingiverse
free
Smoothieboard (4XC/5XC) - Slim Box by mdietz
...r 5xc as well. all other enclosures on thingiverse where either for too large or too small (different version of smoothieboard ).
thingiverse
free
SaldoT Smoothieboard Holder by saldot
...rinters but my printer needed some more clearance for the fans on my hotend/effector. the album pictures are of the long variant.
thingiverse
free
Smoothieboard X5 by RoBotniK
...ction of my new 3d printer. it's not that exact, but the size and the fixing holes are. available as step and iges. have fun!
thingiverse
free
Smoothieboard Mount Spacer by MacNite
...sel mini). works nice - although the ports (sd, usb, ethernet) are a little white recessed (the stepper motors where in the way).
thingiverse
free
Smoothieboard beetle case by pinkbeetle
...eded, and added a beetle :)
plenty of room for all of your wires under the top of this case, and smoothieboard stays very cool.
thingiverse
free
Kossel Mini top holder for Smoothieboard by leving
...smoothieboard to the top. the height should not change, so i created these hanger holders. they keep in place by the 1515 clips.
thingiverse
free
Smoothieboard case by xzivr
...meant to be run out the holes in the sides, with the top holes being open so you can easily check/plug/unplug connections. enjoy!
thingiverse
free
Sidecar Controller Housing for 5XC Smoothieboard by Gkbeer
...er harness, usb cable are omitted from these models and left for the individual to define.
this is a design of my own creation.
Facia
thingiverse
free
Facia Helper Holder by BrandonMBrown89
...facia helper holder by brandonmbrown89
thingiverse
this should help in hanging facia.
thingiverse
free
Facia Board Holder by BrandonMBrown89
...facia board holder by brandonmbrown89
thingiverse
help hold your facia board in place while you hang.
thingiverse
free
Window Blind Facia Clip by mikeaj
...window blind facia clip by mikeaj
thingiverse
replacement clip for window blind facia or head board.
thingiverse
free
Yaesu FT-857D Facia Mount by Phogwart
...ders. the curved one can be attached to side of facia mount.
added desk stand for the facia.
let me know if it requires tweaking.
thingiverse
free
Facia Board Hanger by BrandonMBrown89
...facia board hanger by brandonmbrown89
thingiverse
help hold that board!
thingiverse
free
FT-857D Facia Plate with GoPro Mount by g0wfv
...ft-857d facia plate with gopro mount by g0wfv
thingiverse
ft-857d facia plate with gopro mount
thingiverse
free
Yaesu FTM-100D Facia Desk Stand
...aesu ftm-100d facia desk stand
thingiverse
desk stand bracket to hold the facia panel of the yaesu ftm-100d at a 45 degree angle
thingiverse
free
Facia clips for BMW vehicles by TheGandyMan
... first design worked perfectly. not sure if it is usable in other cars. let me know if you want the open scad design to modify.
thingiverse
free
Patrol dash facia plugs by mabadajo
...patrol dash facia plugs by mabadajo
thingiverse
replacement plugs for your broken ones.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)