Thingiverse
Selflocking Bondage Mittens by joe-the-wulf
by Thingiverse
Last crawled date: 3 years, 1 month ago
This mittens are self-locking, so no additional locks are required. The inside shape is based on a 3D-scan from a hand, so they are relatively comfortable, also for long time use. The spheroid shaped outside is completely smooth, no hooks, no locks, no nothing, so no way to use the locked-in hand for anything.
To use the mittens simply slide your hand into part A, place it over part B and insert both hooks into part B with a little rotating move. The middle of the wrist opening is the center of rotation. Take care that you don't get your skin caught between the parts while locking. Carefully press part A into B until the are locked. That's all, see pictures.
As key can be used any bolt, diameter up to 8mm and 55mm minimum length (when mitten not scaled). Maybe a (backup) key should be fixed installed somewhere, in a secure place.
For an emergency release simply remove the screw which hold the hook inside.
Sizing:
The mittens are sized for a 9cm wide hand, measured over the 4 fingers like for glove sizes too.
If the hand is to small it can pulled out, so scaling will be necessary.
I've added a 2D scan of my hand to the Thing Files (reference_hand_size.pdf), maybe it's helpful for scaling.
Please make a test print of the SizeCheck file first, to ensure you can't pull the hand out. You'll need 2 nuts M6 and 2 hexagon socket screws M6x20 for the not scaled version.
Scaling:
When you need to scale do it with 3D software, if possible. So you can see all parts in the original position to prevent mistakes, while slicing software lay every part to the building plate (in this case the Hook). You should be able to scale every axis with different values, if necessary. The Hook can be rotated at the end (or in slicer) by 58 degrees around the Y axis to print it without support is needed.
If you need to scale with Cura take care of the orientation of the parts, because it seams cura makes some optimizations during loading a file. Use can fix this under Edit by Reset All Modell Positions / Transformations.
Please consider to print SizeCheck again.
The constructed mitten is the right one, please use the mirror function in your slicer software for the left one.
Installing the Hook:
Because the need of scaling I can't use a M4 screw and nut in this Hook file, so it has a 2mm hole which can be drilled up to the diameter your self-tapping screw needs.
Printing:
Take care of your support settings, otherwise it can be difficult to remove in some areas or unstable if it's high and freestanding.
I've sliced mittens with 1.6mm wall and 15% infill, triangle pattern with Cura. Part A with tree support, Part B with normal support.
Slow down printing speed for the first 6mm and for part A when the two hooks starts to be printed on the support until the are connected to the main part.
The Hook I've printed with 100% infill.
The mitten parts are ~300g each, needs ~18h to print each, with 0.2 layer height. That's one reason, I've used a spheroid shape, not a sphere.
DISCLAIMER:
Use it at your own risk and not when you're alone!
Have fun and stay safe!
To use the mittens simply slide your hand into part A, place it over part B and insert both hooks into part B with a little rotating move. The middle of the wrist opening is the center of rotation. Take care that you don't get your skin caught between the parts while locking. Carefully press part A into B until the are locked. That's all, see pictures.
As key can be used any bolt, diameter up to 8mm and 55mm minimum length (when mitten not scaled). Maybe a (backup) key should be fixed installed somewhere, in a secure place.
For an emergency release simply remove the screw which hold the hook inside.
Sizing:
The mittens are sized for a 9cm wide hand, measured over the 4 fingers like for glove sizes too.
If the hand is to small it can pulled out, so scaling will be necessary.
I've added a 2D scan of my hand to the Thing Files (reference_hand_size.pdf), maybe it's helpful for scaling.
Please make a test print of the SizeCheck file first, to ensure you can't pull the hand out. You'll need 2 nuts M6 and 2 hexagon socket screws M6x20 for the not scaled version.
Scaling:
When you need to scale do it with 3D software, if possible. So you can see all parts in the original position to prevent mistakes, while slicing software lay every part to the building plate (in this case the Hook). You should be able to scale every axis with different values, if necessary. The Hook can be rotated at the end (or in slicer) by 58 degrees around the Y axis to print it without support is needed.
If you need to scale with Cura take care of the orientation of the parts, because it seams cura makes some optimizations during loading a file. Use can fix this under Edit by Reset All Modell Positions / Transformations.
Please consider to print SizeCheck again.
The constructed mitten is the right one, please use the mirror function in your slicer software for the left one.
Installing the Hook:
Because the need of scaling I can't use a M4 screw and nut in this Hook file, so it has a 2mm hole which can be drilled up to the diameter your self-tapping screw needs.
Printing:
Take care of your support settings, otherwise it can be difficult to remove in some areas or unstable if it's high and freestanding.
I've sliced mittens with 1.6mm wall and 15% infill, triangle pattern with Cura. Part A with tree support, Part B with normal support.
Slow down printing speed for the first 6mm and for part A when the two hooks starts to be printed on the support until the are connected to the main part.
The Hook I've printed with 100% infill.
The mitten parts are ~300g each, needs ~18h to print each, with 0.2 layer height. That's one reason, I've used a spheroid shape, not a sphere.
DISCLAIMER:
Use it at your own risk and not when you're alone!
Have fun and stay safe!
Similar models
thingiverse
free
McKenzie Mitten Collection by joe-the-wulf
...rtant things, otherwise simply ask :-)
disclaimer:
use it at your own risk and not when you're alone!
have fun and stay safe!
thingiverse
free
X5SA 2E Fan Duct by Crazymister
...de.
careful around the hooks they break easily when you remove the support. might need a little file for the inside of the hooks.
thingiverse
free
Print In Place Gravitational Hook by lecter
...rouble)
after removing the supports you use a putty knife or an exacto knife (or whatever) to gently force the parts to separate.
thingiverse
free
Mittens Blocker by Mabluz
...sharp knife and some sandpaper around all edges.
remember to print two if you want to wash both mittens at the same time!
enjoy!
thingiverse
free
M12 bolt wings hand by kiwimato
...ed a m12 bolt than can be easily screwed by hand, so i remixed this part to avoid using supports when printing.
thanks cal_patch!
grabcad
free
Hanging Hook 02
...rinter. i placed the part on its side on the print bed, hence needs print supports.
i hope you can find this print useful, too.
grabcad
free
Mechanism Design A002
...mple lock on a drawer or some diy projects. most parts can be 3d printed. need to prepare some screws to assemble parts together.
thingiverse
free
interlocking mold making key by RickysChocolateBox
...akes the space of them creating interlocking mold parts. again you'll need to rotate the part in your slicer so it lays flat.
grabcad
free
Hanging Hook
...a prusa i3 mk3s printer. print the hook on its' side and no supported required.
i hope you can find this print useful, too.
thingiverse
free
Sidewinder X1 - Side Toolbox with Top Cover by jeahjeah
...th it (or you can use it as trashbin for small failed parts... ;-) ).
feel free to post a make whenever you've printed it :-)
Selflocking
thingiverse
free
selflocking screw by schwaiger
...selflocking screw by schwaiger
thingiverse
selbstsichernde schraube
thingiverse
free
Selflocking spool holder by ggaljoen
...selflocking spool holder by ggaljoen
thingiverse
spool holder keyless/boltless mount
thingiverse
free
Adjustable endstop Brackets for FLsun QQ by Rics_3D
...adjustable endstop brackets for flsun qq you need: 3x selflocking m3 nut 3x m3x30...
thingiverse
free
Roll for play doh by Zoidie
...playing with play doh. designed for m4 screw with selflocking nut for security reasons, you know small children. designed...
thingiverse
free
Switch Holder for 22mm Motorcycle Handlebar by M79Project
...a hole for 5mm led, switch and a hole for cable sleeve. for mounting i designed 5mm holes for m5 hex bolts and 5mm selflock nuts.
thingiverse
free
HyperCube XY_Joiner_8mm_Alu_Rods Stronger by Pogasi
...m3x35 and for clamp 4x m3x25 and 6x m3 selflocking ...
thingiverse
free
Rubik's 4x4x2 cross blocked by faggahz
...corner.stl. support material required. assembly with m3 screw and selflocking ...
thingiverse
free
GoPro HERO Session 4 Gimbal by zockerlein
...dc motor (or other 22mm motor) 4x m3x16mm 4x selflocking nylon nut m3 8x m3x12 flat head...
thingiverse
free
Bosch cordless drill internal plug (connects with external battery) by makibox850
...some minor cosmetic changes. -the required parts: 2x screws, (selflocking nuts m4x16 (small heads) 2x screws , (selflocking) nuts...
Bondage
thingiverse
free
Bondage Master by CartoonCorpse
...bondage master by cartooncorpse
thingiverse
an original sculpture.
thingiverse
free
Bondage/ BDSM Mouthgag by Hydroprint
...
thingiverse
bondage mouth gag, use at your own risk, enjoy!
check out my other creations, please like and follow - hydroprint..
thingiverse
free
Bondage Fiddle by 3dbound
...e fiddle by 3dbound
thingiverse
untested, but should be fully functional. hinge hole is 7mm and lock/latch hole is 10mm.
enjoy.
sketchfab
$9
Black leather blindfold eye strap bondage
...y removing inner parts of the mesh if needed. - black leather blindfold eye strap bondage - buy royalty free 3d model by deepdown
thingiverse
free
Bondage/ BDSM - Rings, Clasps and Buckles! by Hydroprint
...sm - rings, clasps and buckles! by hydroprint
thingiverse
a selection of rings, clasps and buckles, use at your own risk, enjoy!
thingiverse
free
Bondage/ BDSM Rope Play Wheel by Hydroprint
...giverse
for use with rope play, use at your own risk, enjoy!
check out my other creations, please like and follow - hydroprint..
thingiverse
free
(Improved Version) Arm/Wrist restraints, Bondage Cuffs for M5 by blackhearttoy
...able with the nut inserted during the print!
print with supports!
wall thickness: 1.2mm
bottom/top thickness 1mm
infill: 35 - 55%
thingiverse
free
Bondage Wall Restrain (cuffs) by Creyen
...too.
1/4 inch holes, so you can use t-track in creative ways for all your restraining purposes ;-)
have fun, be dirty, play safe.
thingiverse
free
Modern (self) Bondage Fiddle with rotating hand-holes, parametric by Tree82
... socket (allen) screws26 x m3 hexagon nuts
9 x m4x20mm hexagon socket (allen) screws9 x m4 hexagon nuts
a rather big padlock
glue
Wulf
3d_export
$17
Focke Wulf Fw 190
...focke wulf fw 190
3dexport
focke wulf fw 190
3d_ocean
$15
Focke-Wulf Fw 190
...fw fw190 jet plane soar transport wulf
low polygon and very well detailed focke-wulf fw 190. check out my profile for more items!
turbosquid
$12
Focke Wulf Triebflugel
...el focke wulf triebflugel for download as 3ds, obj, and blend on turbosquid: 3d models for games, architecture, videos. (1299050)
turbosquid
$12
Focke Wulf Triebflugel
...el focke wulf triebflugel for download as 3ds, obj, and blend on turbosquid: 3d models for games, architecture, videos. (1299049)
turbosquid
$8
Focke-Wulf Volksjager
... focke-wulf volksjager for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1208941)
turbosquid
$80
focke-wulf 189
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Focke Wulf 190A4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Focke Wulf 190A4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Focke Wulf 190A4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Focke-Wulf Triebflügel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mittens
turbosquid
$1
Mittens
...turbosquid
royalty free 3d model mittens for download as obj on turbosquid: 3d models for games, architecture, videos. (1409679)
turbosquid
$10
Mitten
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$8
Mittens
...gt;-basecolor<br>-height<br>-metallic<br>-normal<br>-roughness<br>-specular<br>1 pbr material
3d_export
$29
knitted wool mittens
...<br>textures resolution range to 4096x4096<br>real-world scale, units - millimeters<br>lighting is not included
3d_export
$15
Snowman 3D Model
...n; snow; fur-cap; mitten; scarf; smile; carrot; 3d; model; winter; decoration; max; vray;
snowman 3d model filipok 59658 3dexport
3d_export
$15
Snowman 3D Model
...n; snow; fur-cap; mitten; scarf; smile; carrot; 3d; model; winter; decoration; max; vray;
snowman 3d model filipok 59668 3dexport
3d_export
$15
Snowman 3D Model
...n; snow; fur-cap; mitten; scarf; smile; carrot; 3d; model; winter; decoration; max; vray;
snowman 3d model filipok 59665 3dexport
3d_ocean
$12
Cooking Glove
...king accessory was modelled and prepared for photo-realistic renderings, close-ups, cg visualization. the model is ready to be...
3d_ocean
$8
Snowman
...enders. previews were rendered in 3ds max 2009, v-ray renderer. 3d model prepared for render in gamma 2.2. all objects are pro...
3d_ocean
$8
Snowman
...enders. previews were rendered in 3ds max 2009, v-ray renderer. 3d model prepared for render in gamma 2.2. all objects are pro...
Joe
3d_export
$15
Joe
...joe
3dexport
joe from a fistful of dollars for 3d printing. two versions, with base and without. also there is low poly version
turbosquid
$35
Joe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$20
Joe chair
...joe chair
designconnected
poltronova joe chair armchairs computer generated 3d model. designed by jonathan de pas.
3ddd
$1
Ulivi JOE
...ulivi , угловой
ulivi joe sofa
soft: 3ds max and v-ray
note: pillows are not included!
turbosquid
$1
Reptile Joe
...osquid
royalty free 3d model reptile joe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1540225)
3ddd
$1
Диван ulivi Joe sofa
...диван ulivi joe sofa
3ddd
ulivi , joe
диван ulivi joe sofa
turbosquid
$100
Joe Root
...ree 3d model joe root for download as ma, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1343839)
turbosquid
$10
Jittery Joe
...e 3d model jittery joe for download as obj, fbx, lxo, and dae on turbosquid: 3d models for games, architecture, videos. (1499417)
turbosquid
$45
Big Joe
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Joe The Bouncer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.