Thingiverse
RC Paramotor
by Thingiverse
Last crawled date: 4 years, 3 months ago
I designed this RC Paramotor to fit the Hobbyking Parafoil, I originally printed someone else's design, but found I didn't have enough thrust, so I started with the prop, chose a tried and true 9x6E APC prop.
The 9x6 prop guard is too big to fit on my 200x200 Wanhao Duplicator i3 Plus, so I cut it into quarters, print 4 of them, along with 4 of the clips, they fit on tabs on the outside of the Prop guard. The central holes are 22 mm spacing (fit for my Emax CF2822 1200kv motors, but any motor with enough power to throw the 9 inch prop and with 22 mm spacing will fit.)
-Edit- 07/09/19 - turns out the spacing is 23 mm for my Emax 2815/09 with a 9x7x3 prop.
-Edit- 04/01/20 - redesigned to a single print piece (Single piece Paramotor.stl) to help with vibrations, and to fit a 22mm spaced motor. To fit the print bed I had to scale down to a 7 inch prop.
Next the lower is designed with an open front to allow for any battery, I have fitted 3S 2200, and 4S 2300s, they fit with a rubber band stretched over the front and hooked to the tabs on the back. This unit also fits two SG90 servos with arm extensions (for more play on the brake lines). Print one of these, and two of the servo arm extensions.
Lastly is the Upper, which has two holes for attaching carabiners with the A B C & D lines from the wing, and two arms with holes (smaller holes), which act as guides for the brake lines. Again print one.
As this is a Paramotor, I print everything with 100% infill as weight is not an issue.
Obviously, like everyone else I'd love to see you post makes etc as I would love to see others flying this RC Paramotor.
-Edit- 05/01/20 - All files have been re-uploaded (some have been updated to accommodate motor shafts.) , the zip file is an all in one obj file. I have also uploaded the files in glb format.
The 9x6 prop guard is too big to fit on my 200x200 Wanhao Duplicator i3 Plus, so I cut it into quarters, print 4 of them, along with 4 of the clips, they fit on tabs on the outside of the Prop guard. The central holes are 22 mm spacing (fit for my Emax CF2822 1200kv motors, but any motor with enough power to throw the 9 inch prop and with 22 mm spacing will fit.)
-Edit- 07/09/19 - turns out the spacing is 23 mm for my Emax 2815/09 with a 9x7x3 prop.
-Edit- 04/01/20 - redesigned to a single print piece (Single piece Paramotor.stl) to help with vibrations, and to fit a 22mm spaced motor. To fit the print bed I had to scale down to a 7 inch prop.
Next the lower is designed with an open front to allow for any battery, I have fitted 3S 2200, and 4S 2300s, they fit with a rubber band stretched over the front and hooked to the tabs on the back. This unit also fits two SG90 servos with arm extensions (for more play on the brake lines). Print one of these, and two of the servo arm extensions.
Lastly is the Upper, which has two holes for attaching carabiners with the A B C & D lines from the wing, and two arms with holes (smaller holes), which act as guides for the brake lines. Again print one.
As this is a Paramotor, I print everything with 100% infill as weight is not an issue.
Obviously, like everyone else I'd love to see you post makes etc as I would love to see others flying this RC Paramotor.
-Edit- 05/01/20 - All files have been re-uploaded (some have been updated to accommodate motor shafts.) , the zip file is an all in one obj file. I have also uploaded the files in glb format.
Similar models
thingiverse
free
T4 Quad Arm for CF2822 Motors (22 mm hole spacing) by acilia
...y for long life.
i will include the alibre file as well as the .igs export for those wanting to make changes to fit their motors.
thingiverse
free
RC Raptor Pan & Tilt camera dome by Project
...blue arrow servo with the tabs cut off
hot glue to affix the 3.2g servo
board cam that fits into the cam cradle
a few servo leads
thingiverse
free
RC Quadplane Tilt Mechanism by MAGA_GodBlessTrump2020
...ightly above the servo gear, and a 0.2mm extrusion on the tilt head against the body ensures it offloads the servo during flight.
grabcad
free
Servo Hatch
...for servos used on rc aircraft. no servo arm hole as i prefer hidden control linkages.
i can add other file extensions as needed
thingiverse
free
RC-Paraglider by gschuto
...direction lines) are connect to the metal rings (show picture)
the two direction lines are connect to he servo arms.
have fun...
grabcad
free
EMAX BL2815/09
...emax bl2815/09
grabcad
rc brushless motor
thingiverse
free
Hubsan X4 v2 prop guard by hawkan
... of the hole to get a snug fit on the motor.
edit: uploaded a new improved prop guard that wont break as easy when crashing ^_^
thingiverse
free
Emax Babyhawk R 2" arm guard motor soft mount by TweetFPV
... recommend using some blue thread locker on your motor screws.
if you print this and like it please click "i made one"
thingiverse
free
UBQ180 Rugged-Style Prop Guard by helpsterTee
...es (i will redo this later, when i have time).
fit for 4x2.5 props.
the arc angle has been reduced to ~180 degrees
resized to fit
thingiverse
free
28mm RC Plane Motor Mount by midijerk
... motor. i use it on a flying wing with a emax cf2822. screws for mounting are extras from servos. used towerpro sg90 micro servo.
Paramotor
thingiverse
free
Paramotor by MarcelVerdult
...paramotor by marcelverdult
thingiverse
diy paramotor parts
work in progress!
thingiverse
free
paramotor logo by ppgpilot
...paramotor logo by ppgpilot
thingiverse
paramotor logo
thingiverse
free
paramotor throttle by patricioruizperret
...paramotor throttle by patricioruizperret
thingiverse
paramotor throttle
thingiverse
free
Paramotor Chair
...paramotor chair
thingiverse
chair for paramotor from hobbyking
printed in petg on printer with 200 x 200mm bed
thingiverse
free
Paramotor Gauge Holder
...paramotor gauge holder
thingiverse
paramotor gauge holder.
thingiverse
free
propeller balancer for paramotor by dradin
...propeller balancer for paramotor by dradin
thingiverse
balancer propeller for paramotor
thingiverse
free
hobbyking paramotor esc by creative70
...hobbyking paramotor esc by creative70
thingiverse
supporto esc per paramotore hobbyking
thingiverse
free
Paramotor transport bracket by 3dGringo
...paramotor transport bracket by 3dgringo
thingiverse
bracket to secure the frame of a paramotor on your cargo hauler of choice.
thingiverse
free
Glass lock for RC paramotor
...glass lock for rc paramotor
thingiverse
glass lock for rc paramotor https://www.thingiverse.com/thing:3532495/files
thingiverse
free
Paramotor for 10x4.5 propellers by CuervoRC
...ellers by cuervorc
thingiverse
paramotor for my hobbiking parafoil.
the video of how it works here: https://youtu.be/fv3e8dgvdue
Rc
3ddd
$1
RC Helicopter
...rc helicopter
3ddd
вертолет
mini rc helicopter
93.329 polys
3d_export
$7
rc helicopter model
...rc helicopter model
3dexport
rc helicopter model
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
turbosquid
$10
rc plane
...lane
turbosquid
free 3d model rc plane for download as blend on turbosquid: 3d models for games, architecture, videos. (1295828)
turbosquid
$100
RC Helicopter
...free 3d model rc helicopter for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298511)
turbosquid
$59
Drone with RC
...3d model drone with rc for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363601)
3d_export
$70
rc helicopter 3D Model
...rc helicopter 3d model
3dexport
rc helocopter
rc helicopter 3d model babay 10536 3dexport
turbosquid
$75
RC buggy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
RC Plane001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
RC Jet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.