Thingiverse
QuadraVase by jaln
by Thingiverse
Last crawled date: 3 years, 1 month ago
Updated: Added a lid for the straight QuadraVase. The lid is scaled to 150% for scaled 150mm QuadraVase. I added a scaled 150% vase as well. If you want the lid for the 100% (100mm) vase, scale the lid to 15.52mm (66.7%). The lid will fit pretty tight and if you have good adhesion you can push it all the way in as shown in the photo. I thought it might break the vase, but it does not after pressing it in and removing it numerous times. ABS is somewhat flexible. I don't know how PLA would deal with the stress. PETg might be fine too.
Two different versions for your 3D printing pleasure, one straight and one twisted.
The models are completely solid and must be set up in your slicer to produce a vase. Do not print them solid! Use your slicer to generate a single layer side wall with 2 or 3 bottom layers and no top layer.
The one in the photo is is white ABS. 240/100C. No fan. No support. .38mm layers. About 1 hour 45 minutes scaled to 150mm high. You can scale to achieve a print time or size you like.
I just noticed that the straight version has some strange faces around the middle where the twisted one does not. That happens somewhere in the translation to .stl. If I have time and figure out why, I will update the model file.
Two different versions for your 3D printing pleasure, one straight and one twisted.
The models are completely solid and must be set up in your slicer to produce a vase. Do not print them solid! Use your slicer to generate a single layer side wall with 2 or 3 bottom layers and no top layer.
The one in the photo is is white ABS. 240/100C. No fan. No support. .38mm layers. About 1 hour 45 minutes scaled to 150mm high. You can scale to achieve a print time or size you like.
I just noticed that the straight version has some strange faces around the middle where the twisted one does not. That happens somewhere in the translation to .stl. If I have time and figure out why, I will update the model file.
Similar models
thingiverse
free
Classical Spiral Vase by markwheadon
...aled to whatever size suits. if you change its size then don't forget to scale the number of solid bottom layers accordingly.
thingiverse
free
Print-in-place ratchet clamp by luchocarreno
...0% original size (the green one in the photos is original size, white one is 150%).
printed in abs, 0,2mm resolution, 40% infill.
thingiverse
free
Vase #98 v1
...wide. it has not been tested for being water proof. if you make it, please post a photo. i'd like to see your print!
enjoy...
thingiverse
free
Z-Axis Rasing Tool 150mm by ItalicSix
....
if any of you lovely makers manage to get it to stick to the print bed and actually print one then please do send over a pic :)
thingiverse
free
parametric twisted vase by heron
...ed with your normal slicer settings. otherwise you have to enable the "vase mode" (or whatsoever your slicer calls it).
thingiverse
free
Small Funnel by TikiLuke
...th 45 degree funnel i made.
edit i added a solid version for printing in vase mode. just select zero bottom or top layers in s3d.
thingiverse
free
Twisted polygonal 5 faces vase with draining hole by Kobebrain
...--> updated version: thinner walls 1.5mm. you can print also in vase or spiral mode to save time and materials.
happy printing
thingiverse
free
Pottery Stamps by BenjaminIsMakingThings
...pload more if i make more desings.
you might want to scale it to be shorter in your slicer if you want print times to be quicker.
thingiverse
free
Twist Box - Vase Mode. by MJHeed
...lf of the box can be printed with a 0.4 or 0.8 nozzle, since nozzle size only affects the inner diameter of your vase mode print.
thingiverse
free
Safe T Bagel Solid by Foreverwinter
...imates: using 10% infill, 0.3mm layers, and 2 perimeters the print time should be about half of the original! (7h opposed to 14h)
Jaln
thingiverse
free
Vase-X3 by jaln
...awn.
there are two sizes of this triangle to hex transition.
they are printed upside to insure that they stay stuck to the bed.
thingiverse
free
AmanteVase by jaln
...is especially useful when you are using pause to change filament colors. pausing on the inner wall will help conceal the change.
thingiverse
free
Vase-X4 by jaln
...t 100mm.
the smaller one is printed upside down for stability while printing.
this design is my favorite of this series.
enjoy!
thingiverse
free
Turbowlz II by jaln
...r the other designs to make your own designs.
lid knob made bigger on 01/22/15. deleted old file-- new file has a designation.
thingiverse
free
Turbo-Bowl: Turbo-Vase+, the Sequel Continues by jaln
...the sequel continues by jaln
thingiverse
here's some matching bowls for vase10a.
(turbo-vase+, the sequel).
scaled 1x and 2x
thingiverse
free
TurBowlz I by jaln
...ed .33mm layers, i am amazed that this even printed with no support!
a testament to lulzbot taz4 and gizmo dorks transparent abs.
thingiverse
free
BublaVase by jaln
... print job. not intentional, but i often recommend printing partial prints to make bowls from vases. some look great both ways.
thingiverse
free
Vase-X2 three versions by jaln
...previous vases were rotations, sweeps along splines, and boolean functions.
scale em, stretch em. have fun.
show us your work.
thingiverse
free
FlamoVase by jaln
...nt at about 30% of its full height, it makes a great screw on lid for the full print of the same scale. see the last two photos.
thingiverse
free
Vase-X1 by jaln
...ave slots. x3 is thicker.
the x1 in the photo was printed right side up and decided to leave the heated bed prior to completion.