Thingiverse
Quad Rover - version 2 by Ajaxjones
by Thingiverse
Last crawled date: 3 years, 1 month ago
Update: 22/12/17 version 2 released, slightly longer core and symetric wheel hubs.
This is my Quad Rover base. It's designed as a platform for a robotic rover to utilise 25mm Gear motors
It can be either remote controlled or fitted with a raspberry pi for remote wifi or autonomous working.
Also provided is a drill guide to drill out the pipe.
The motor tubes are constructed using PVC drainpipe , but if you have the inclination you could print these out as well.
You need to print 4 of the bumpers , which allow the bolts to mount and clamp against the tubing.
4mm bolts are used to connect the front and back to the central core and RC 1/10 wheels are used with 12mm hex adaptors for the motors.
A complete rolling chassis with motors, wheels and mounting bolts only costs about about £50.
for the RC version 2x RC ESC , mixer and battery should only cost about another £20 and then its just the cost of a RC and TX
for the Pi Version a quad motor shield to use is the motozero that only costs £10 on top of a pi Zero Wifi along with a suitable battery and/or a voltage reg for about £3
This is my Quad Rover base. It's designed as a platform for a robotic rover to utilise 25mm Gear motors
It can be either remote controlled or fitted with a raspberry pi for remote wifi or autonomous working.
Also provided is a drill guide to drill out the pipe.
The motor tubes are constructed using PVC drainpipe , but if you have the inclination you could print these out as well.
You need to print 4 of the bumpers , which allow the bolts to mount and clamp against the tubing.
4mm bolts are used to connect the front and back to the central core and RC 1/10 wheels are used with 12mm hex adaptors for the motors.
A complete rolling chassis with motors, wheels and mounting bolts only costs about about £50.
for the RC version 2x RC ESC , mixer and battery should only cost about another £20 and then its just the cost of a RC and TX
for the Pi Version a quad motor shield to use is the motozero that only costs £10 on top of a pi Zero Wifi along with a suitable battery and/or a voltage reg for about £3
Similar models
thingiverse
free
Wifi controlled Omni Wheel Car(4 Wheels) by konnitiha
.../terutakke.com/diary/wifi-remote-controle-car-with-omniwheel-and-esp32#program
video: https://www.youtube.com/watch?v=uixorlri6tc
thingiverse
free
RC heli or plane starter kone for mounting on a drill by Sonic100
...rew. than lock down with 2 bolts.
the end of the wirebolt on the outside so you can fix this in your drill.
works perfect for me.
grabcad
free
Xgentec Rover Explorer ROV V1
...stepper motor wheel adapter mounts.
credit to trinityscsp for the raspberry pi model as a template for the rover hole placement.
grabcad
free
Xgentec Rover Explorer ROV V2
...stepper motor wheel adapter mounts.
credit to trinityscsp for the raspberry pi model as a template for the rover hole placement.
thingiverse
free
Motor Mount for Drill Motors (34.6mm diameter motors) by lw_17_lucas
...re only limited to your imagination. my prints took about 2-3 hours depending on which version you use and the infill you choose.
thingiverse
free
Drill motor holder by BFman
...ck & decker drill motor holder. i'm going to use it as motor mount for my rc car project.
drill cd12c. holes for m3 bolts
thingiverse
free
Motor protectors Nasty 10" quadcopter by marc5
...5 motors. i printed it out of petg.
included here is a battery protector held on with bungee cords for bottom mounted batteries.
thingiverse
free
Flitetest Power Pack Print in Place - RC Brushless Motor Mount by oldfartt
...e power pack motor mount to be used with the flitetest foam core models. much more solid than building out of foam core and wood.
thingiverse
free
Vortex FrSky D4R-II Mount Version 2 by idnarbjm
...on 2 top has larger cylinders that you can drill out to 3mm and put antenna tubing in.
version 3 top has sideways antenna tubes
thingiverse
free
RC Springer tugboat
...video. a more normal motor would be a 540 crawler motor and 6v batteries.
200x250x200 is the minimum printer size for this model.
Ajaxjones
thingiverse
free
Shutter release by Ajaxjones
...ease handle for a canon. push button switch shorts the tip to ground which fires the camera release. using some 3mm stereo cable.
thingiverse
free
Airless Tyre by Ajaxjones
...ted with 10% infill with flexible pla and two types of hub are included. these are in pla+ and tyre and hub super glued together.
thingiverse
free
Robot arm base by Ajaxjones
...thingiverse
added a ring to the base and a cable catcher, also scaled at x10.2 so easier to print and the servo fits much easier
thingiverse
free
FPV Tiny Trak by Ajaxjones
...erse
components to build a fpv tiny trak, also look at https://www.thingiverse.com/thing:2935413 which uses the same lego tracks
thingiverse
free
O-16.5 girder by Ajaxjones
...d. idea is to create a longer length span. currently using with https://www.thingiverse.com/thing:2840044 for the pier stanchions
thingiverse
free
Black Star by Ajaxjones
...eels. includes a dummy turnigy battery for placement purposes.
wheel hub based on parts of http://www.thingiverse.com/thing:65063
thingiverse
free
Mini drill spool winder with no support by Ajaxjones
...winder with no support by ajaxjones
thingiverse
added a cone internally so it would print nicely without supports to base plates
thingiverse
free
mitre block for tubing by Ajaxjones
...s in case i need to hold it in a vise. also added some ears to guide the saw as i want to cut some 25mm tubing for the moon rover
thingiverse
free
Skateboard Wheel Stabiliser by Ajaxjones
...67466 and edited out to just use the axle stub
it fits with 4mm bolts and spins surprisingly freely.
https://youtu.be/bqvler4vzxa
thingiverse
free
LED LM2596 Voltage Regulator case by Ajaxjones
...he generally available led lm2596 voltage regulator buck converter module 4-40v in 1-35v out. uses 4 m3 20mm screws and 4xm3 nuts
Rover
3d_ocean
$89
Land-Rover Range Rover 2011
...andling have been transformed with the introduction of new engines, transmission and chassis systems. combine these enhancemen...
3d_export
$20
land rover
...land rover
3dexport
land rover
3d_export
$14
Land Rover Range Rover 2022
...land rover range rover 2022
3dexport
3d_export
$39
land rover range rover iii
... rover iii
3dexport
land rover range rover iii, year 2002.<br>model with high quality finishing on the outside and inside.
3d_export
$7
the rover
...the rover
3dexport
turbosquid
$5
Rover
...royalty free 3d model rover for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1673120)
3d_ocean
$89
Land Rover Range Rover 1986
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_export
$29
Land Rover Range Rover 1993 3D Model
... rover range rover 1993 3d model
3dexport
land rover range 1993
land rover range rover 1993 3d model 3dlogicline 39509 3dexport
3d_export
$69
Land Rover Range Rover Velar 2023
...land rover range rover velar 2023
3dexport
3d_export
$20
land rover range rover
...e apps.<br>car textures:png - 2k resolution other available formats: obj, 3ds, fbx, max. polycount: 35742 poly / 37163 tris
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Version
3ddd
$1
Diamond version
...nd , version , ванна
visionnaire - diamond bath
turbosquid
$50
LibraryMini Version
...free 3d model librarymini version for download as max and jpg on turbosquid: 3d models for games, architecture, videos. (1617724)
design_connected
$34
Barocco Version 01
...barocco version 01
designconnected
zanotta barocco version 01 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Barocco Version 02
...barocco version 02
designconnected
zanotta barocco version 02 computer generated 3d model. designed by progetti, emaf.
turbosquid
free
Door [2 versions]
...rbosquid
free 3d model door [2 versions] for download as fbx on turbosquid: 3d models for games, architecture, videos. (1223985)
turbosquid
$2
seat version 0.1
...
royalty free 3d model seat version 0.1 for download as blend on turbosquid: 3d models for games, architecture, videos. (1432653)
turbosquid
$12
Chip Version 03
...lty free 3d model chip version 03 for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1241145)
3d_export
$10
magnolia grandiflora mature version
...magnolia grandiflora mature version
3dexport
magnolia grandiflora mature version
3d_export
$8
room assets and voxel version
...room assets and voxel version
3dexport
room assets and voxel version
turbosquid
$35
Zil Civilian version
... model zil civilian version for download as cgf, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1639420)
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур