Thingiverse
Prusa MK3 Display Patch/Upgrade Knop direction of rotation (Hardware solution) by Devilscave
by Thingiverse
Last crawled date: 3 years, 1 month ago
DEUTSCH:
Hallo,
heute habe ich am Display des MK3 einen Fehler behoben der mich sehr lange gestört hat, evtl geht es ein paar Leuten da draussen genau so.
Ich finde einfach das die Drehrichtung des Menü Buttons falsch herum ist.
Hoch gegen den Uhrzeigersinn und runter im Uhrzeigersinn, ist falsch.
Dazu müsste der Regler auf der linken Seite vom Display sitzen.
Nun wollte ich nicht das Originale Prusa Display verbasteln und habe mir für knapp 7€ eins in eBay bestellt. (272287848790)
Wenn euch das egal ist schaut euch die Anleitung unter V2 weiter unten an.
Nach meiner ersten Inspizierung des Display, musste ich feststellen das sie sich in ein paar kleinigkeiten unterscheiden.
Die kabel Buchsen haben die Öffnung auf der falschen Seite
Der Reset Taster ist flacher als der von Prusa
Der Drehknopf ist höher als der von Prusa
Das Display Poti ist zu groß
Die Stecker Buchsen sind aber leicht ohne Löten umzudrehen, man kann sie einfach mit einer kleinen Zange (Prusa Werkzeug) abziehen und andersherum wieder aufstecken, dauert 1 Minute.
Natürlich habe ich mir vorher beide Platinen Layouts angesehen und die Bepinnung ist absolut gleich.
Dann habe ich es gleich mal getestet am Drucker und es funktioniert wunderbar.
Und das Absolute Highlight ist, ich brauche garnichts weiter am Knopf umbasteln, da allein durch tausch dieser Platine der Drehknopf richtig herum funktioniert. Das war leichter als gedacht.
Jetzt zu den anderen Problemen,
für den kürzere Reset Taster habe ich einen Adapter erstellt der einfach im Prusa Display Cover auf den Knopfteil aufgeklebt werden kann, diesen nutze ich aber nicht da ich froh bin jetzt mehr Spiel in dem Taster zu haben, da ich schon 2-3 mal versehendlich auf Reset gekommen bin.
Und der längere Drehregler kann auf zwei arten geändert werden.
Entweder man sägt Ihn auf die richtige länge ab, ist nur Alu oder man verwendet einen andere Drehknopf, dazu habe ich ebenfalls mal zwei neue erstellt, einer in Original Optik und einer mit Fingerring in 18mm für meine dünnen Finger ;)
Durch die neue Länge ergeben sich aber mehr Möglichkeiten für andere Knöpfe die bei der kurzen Version vielleicht nicht so funktionieren oder fest halten. Deswegen sollte man sich Überlegen ob man ihn wirklich gleich absägt oder erstmal so belässt.
Und nun zum Poti Problem, dies kann auch auf mehrere Arten gelöst werden.
Entweder man lötet die Potis um, oder man ändert einfach des Halter.
Hierzu habe ich auch eine abgeänderte version zum Ausdrucken, oder man sägt einfach das Stück was im weg ist raus. So hab ich es gemacht.
V2:
Solltet Ihr aber kleine Lust haben extra ein neues zu bestellen und sonstige Umbauten zu machen könnt Ihr auch einfach das Original Display abändern und so die Drehrichtung ändern.Trennt dafür einfach die beiden Leiterbahnen auf der Rückseite der Platine die vom Regler kommen und zu EPX2 gehn, und entfernt den Schutzlack etwas wie auf den Bild mit V2. Lötet dann neue Leitungen auf und kreuzt die beiden bahnen. Das wars schon.
ENGLISH:
Hello
Today I corrected on the display of the MK3 a bug that bothered me for a very long time, maybe it is a few people out there just like that.
I just think that the direction of rotation of the menu button is the wrong way round.
High counterclockwise and down clockwise is wrong.
For this, the controller would have to sit on the left side of the display.
Now I did not want to dangle the original Prusa display and ordered for just under 7 € one in eBay. (272287848790)
If you do not care, look at the instructions below V2 below.
After my first inspection of the display, I realized that they differ in a few small things.
The cable jacks have the opening on the wrong side
The reset button is flatter than that of Prusa
The knob is higher than Prusa's
The display potentiometer is too big
The plug sockets are however easy to turn around without soldering, you can simply pull them off with a small pliers (Prusa tool) and put them on the other side, takes 1 minute.
Of course, I have previously considered both board layouts and the weaving is absolutely the same.
Then I tested it on the printer and it works perfect.
And the absolute highlight is, i need nothing further tinkering with the knob, because only by swapping this board the knob works the right way round. It was easier than expected.
Now for the other two problems,
for the shorter reset button I have created an adapter that can be glued on the button part in the Prusa Display Cover, but I do not use it because I am glad to have more play in the button now, because I have missed it 2-3 times Reset came.
And the longer knob can be changed in two ways.
Either you saw him on the right length from, is only aluminum or you use another knob, I have also created two new ones, one in original optics and one with finger ring in 18mm for my thin fingers;)
Due to the new length, however, there are more options for other buttons that might not work or hold on the short version. That's why you should think about whether you really saw it off immediately or leave it alone.
And now the Poti problem, this can also be solved in several ways.
Either you solder the pots around, or just change the holder.
For this I also have a modified version to print, or you just saw the piece of what is in the way out. That's how I did it.
V2:
But if you have a little desire to order a new extra and make other modifications you can also simply change the original display and so change the direction of rotation. Just disconnect the two traces on the back of the board coming from the controller and go to EPX2, and removes the protective varnish something like in the picture with V2. Solder then new lines and crosses the two tracks. That's it.
Viel Spass beim Nachbasteln
Have fun
Hallo,
heute habe ich am Display des MK3 einen Fehler behoben der mich sehr lange gestört hat, evtl geht es ein paar Leuten da draussen genau so.
Ich finde einfach das die Drehrichtung des Menü Buttons falsch herum ist.
Hoch gegen den Uhrzeigersinn und runter im Uhrzeigersinn, ist falsch.
Dazu müsste der Regler auf der linken Seite vom Display sitzen.
Nun wollte ich nicht das Originale Prusa Display verbasteln und habe mir für knapp 7€ eins in eBay bestellt. (272287848790)
Wenn euch das egal ist schaut euch die Anleitung unter V2 weiter unten an.
Nach meiner ersten Inspizierung des Display, musste ich feststellen das sie sich in ein paar kleinigkeiten unterscheiden.
Die kabel Buchsen haben die Öffnung auf der falschen Seite
Der Reset Taster ist flacher als der von Prusa
Der Drehknopf ist höher als der von Prusa
Das Display Poti ist zu groß
Die Stecker Buchsen sind aber leicht ohne Löten umzudrehen, man kann sie einfach mit einer kleinen Zange (Prusa Werkzeug) abziehen und andersherum wieder aufstecken, dauert 1 Minute.
Natürlich habe ich mir vorher beide Platinen Layouts angesehen und die Bepinnung ist absolut gleich.
Dann habe ich es gleich mal getestet am Drucker und es funktioniert wunderbar.
Und das Absolute Highlight ist, ich brauche garnichts weiter am Knopf umbasteln, da allein durch tausch dieser Platine der Drehknopf richtig herum funktioniert. Das war leichter als gedacht.
Jetzt zu den anderen Problemen,
für den kürzere Reset Taster habe ich einen Adapter erstellt der einfach im Prusa Display Cover auf den Knopfteil aufgeklebt werden kann, diesen nutze ich aber nicht da ich froh bin jetzt mehr Spiel in dem Taster zu haben, da ich schon 2-3 mal versehendlich auf Reset gekommen bin.
Und der längere Drehregler kann auf zwei arten geändert werden.
Entweder man sägt Ihn auf die richtige länge ab, ist nur Alu oder man verwendet einen andere Drehknopf, dazu habe ich ebenfalls mal zwei neue erstellt, einer in Original Optik und einer mit Fingerring in 18mm für meine dünnen Finger ;)
Durch die neue Länge ergeben sich aber mehr Möglichkeiten für andere Knöpfe die bei der kurzen Version vielleicht nicht so funktionieren oder fest halten. Deswegen sollte man sich Überlegen ob man ihn wirklich gleich absägt oder erstmal so belässt.
Und nun zum Poti Problem, dies kann auch auf mehrere Arten gelöst werden.
Entweder man lötet die Potis um, oder man ändert einfach des Halter.
Hierzu habe ich auch eine abgeänderte version zum Ausdrucken, oder man sägt einfach das Stück was im weg ist raus. So hab ich es gemacht.
V2:
Solltet Ihr aber kleine Lust haben extra ein neues zu bestellen und sonstige Umbauten zu machen könnt Ihr auch einfach das Original Display abändern und so die Drehrichtung ändern.Trennt dafür einfach die beiden Leiterbahnen auf der Rückseite der Platine die vom Regler kommen und zu EPX2 gehn, und entfernt den Schutzlack etwas wie auf den Bild mit V2. Lötet dann neue Leitungen auf und kreuzt die beiden bahnen. Das wars schon.
ENGLISH:
Hello
Today I corrected on the display of the MK3 a bug that bothered me for a very long time, maybe it is a few people out there just like that.
I just think that the direction of rotation of the menu button is the wrong way round.
High counterclockwise and down clockwise is wrong.
For this, the controller would have to sit on the left side of the display.
Now I did not want to dangle the original Prusa display and ordered for just under 7 € one in eBay. (272287848790)
If you do not care, look at the instructions below V2 below.
After my first inspection of the display, I realized that they differ in a few small things.
The cable jacks have the opening on the wrong side
The reset button is flatter than that of Prusa
The knob is higher than Prusa's
The display potentiometer is too big
The plug sockets are however easy to turn around without soldering, you can simply pull them off with a small pliers (Prusa tool) and put them on the other side, takes 1 minute.
Of course, I have previously considered both board layouts and the weaving is absolutely the same.
Then I tested it on the printer and it works perfect.
And the absolute highlight is, i need nothing further tinkering with the knob, because only by swapping this board the knob works the right way round. It was easier than expected.
Now for the other two problems,
for the shorter reset button I have created an adapter that can be glued on the button part in the Prusa Display Cover, but I do not use it because I am glad to have more play in the button now, because I have missed it 2-3 times Reset came.
And the longer knob can be changed in two ways.
Either you saw him on the right length from, is only aluminum or you use another knob, I have also created two new ones, one in original optics and one with finger ring in 18mm for my thin fingers;)
Due to the new length, however, there are more options for other buttons that might not work or hold on the short version. That's why you should think about whether you really saw it off immediately or leave it alone.
And now the Poti problem, this can also be solved in several ways.
Either you solder the pots around, or just change the holder.
For this I also have a modified version to print, or you just saw the piece of what is in the way out. That's how I did it.
V2:
But if you have a little desire to order a new extra and make other modifications you can also simply change the original display and so change the direction of rotation. Just disconnect the two traces on the back of the board coming from the controller and go to EPX2, and removes the protective varnish something like in the picture with V2. Solder then new lines and crosses the two tracks. That's it.
Viel Spass beim Nachbasteln
Have fun
Similar models
thingiverse
free
Familien Sparclub, Spardose by Schneeking
...h meine sachen gefallen würde ich mich sehr über eine kleine spende freuen. klickt auf den linkhttps://www.paypal.me/fadekofolien
thingiverse
free
Home Blumenstecker by Eulenmaus009
...oto zu sehen ist findet ihr hier https://www.thingiverse.com/thing:2999036 ich den auf 190% vergrößert und im vasenmodus gedruckt
grabcad
free
Stirling 1818 V2
...ktion war die patentzeichnung von rev. stirling die ich aber abgeändert habe, weil die hübe der schwingen so nicht passen können.
thingiverse
free
RummeCup Brett OriginalBreite by Kleinz1971
... 8.88.8
die zu letzt hinzugefügten stl brettletzteversion und fussletzteversion
sind die von den ersten bildern. also brett voll.
thingiverse
free
Helfende Hand Basis (Helping Hand Base) by Dr_Peacock
... bilder.
die base ist 12cm von seite zu seite.
kritik, lob oder verbesserungsvorschläge könnt ihr gerne als comment hinterlassen.
thingiverse
free
Kamerahalterung für Foscam C2 an Raise3D Drucker by wolwes
...s dicker als eigentlich nötig. aber dadurch ist das ganze wesentlich stabiler und schwingt nicht so.
https://youtu.be/fw55pqkulw4
thingiverse
free
Servohalterung 2.0 by dagba
...abe die halterung nun an einigen weichen im einsatz und es ist eine perfekte lösung…
weitere / neue designs auf:http://dagba.de
thingiverse
free
Thule Tension Rafter G2 Halter Kassettenseite für Omnistor 6300 by Twotone74
...ahlung vielleicht zu weich wird und mir auch bei windbelastung zu spröde/unelastisch ist.
support wird für den überhang benötigt.
thingiverse
free
Punktschweißgerät Schweißlötmaschine für Li-Ion Akku Gehäuse by Lordcyber
...ht der support zu fest hing und ich so auch mehr stabilität beim schweißen habe.
der weiße punkt ist der taster auf der platine..
thingiverse
free
Verstellbare Daempferfuesse fuer den 3D-Drucker by AFUDirk
...n mit größeren kühlköpern versehen und demnächst wird der gehäuselüfter noch in der drehzahl reduziert, bzw. temperaturgesteuert.
Devilscave
thingiverse
free
Handschuhfach Griff Scharnier (Glove box) Renault Twingo C06 by Devilscave
...ngo immer das handschuhfach griffteil abfällt, ein neues scharnierteil erstellt. passt wunderbar und hält den griff wieder super.
thingiverse
free
Twingo 1 C06 Heckklappenschloss Gestängehalter by Devilscave
... nicht verriegelt. habe das teil schon eine ganze weile im einsatz und hält bombe. bei renault so gut wie nicht mehr zu bekommen.
thingiverse
free
USB HOLDER - Corvega Atomic V8 Motor style Multipart EDITION by Devilscave
... little more and made more space inside and printable without support. otherwise the design is unchanged, thanks to demolition88.
thingiverse
free
Fallout 76 Prusa MK3 Display LCD knop by Devilscave
...for my display mod because the axis is longer there.https://www.thingiverse.com/thing:3103099
a software based change is in work.
thingiverse
free
Prusa MK3s+ Fan-Shroud adapted for MK3s R6 to R4 by Devilscave
...as changed significantly.
so you can keep the old extruder and still use the new nozzle and don't have to reprint everything.
thingiverse
free
Nema 17 plug holder 4pin JST SM2,54mm 22AWG by Devilscave
...auch leicht nachträglich zu ändern, nur schraube etwas lösen, halter abziehen und wie gewünscht wieder aufstecken und festziehen.
thingiverse
free
Prusa MK3s+ LED-Fan-Shroud adapted for MK3s R6 to R4 by Devilscave
...39;m done with the led version. and already have it in use. works very well, the technology is the same as the previous versions.
thingiverse
free
Ultimate Spool Holder V3+ for Prusa MK3/s inspired by TUSH by Devilscave
...s and nuts from the replacement set, of the mk3 printer.
as nuts i use 4x stopnuts for the bearings and 4x normal for the holder.
thingiverse
free
Changed Prusa i3 MK3 ENCLOSURE - Ikea Lack Table Corners V2 by Devilscave
...leg extension, these belong to the bottom of the table legs between the door hinge and leg.
1 / 5 / 10 / 15 / 20 / 30 / 40 / 50mm
Knop
turbosquid
$3
Knop
...alty free 3d model knop for download as dwg, sldpr, and sldas on turbosquid: 3d models for games, architecture, videos. (1224761)
thingiverse
free
Door knop
...door knop
thingiverse
this is a door knop
thingiverse
free
Door knop - Heart
...door knop - heart
thingiverse
heart door knop
thingiverse
free
Shift Knop by GillyBot3D
...shift knop by gillybot3d
thingiverse
shift knop with push button
3dbaza
$4
JAMNI Knop Stool (117881)
...jamni knop stool (117881)
3dbaza
jamni knop stool 3d model.
thingiverse
free
Laundry machine knop by noldic
...laundry machine knop by noldic
thingiverse
laundry machine knop
(white on photo orig, gray this model)
thingiverse
free
Simple hanging knop by bibomator
...simple hanging knop by bibomator
thingiverse
this is a small simple hanging knop fitting for tesa powerstrips (small)
thingiverse
free
glazendeur knop by cifra
...glazendeur knop by cifra
thingiverse
glazendeur knoppen (lijm)
thingiverse
free
M8 knop by AndersV209
...m8 knop by andersv209
thingiverse
handle for a m8 nut or hex bolt
thingiverse
free
Kenwood KR 9400 Power Knop by applecitronaut
...kenwood kr 9400 power knop by applecitronaut
thingiverse
kenwood kr 9400 power knop
Patch
3ddd
$1
patch ковер
...h ковер
3ddd
ковер , корова , шкура
patch ковер
turbosquid
$49
Snow Patch
...bosquid
royalty free 3d model snow patch for download as fbx on turbosquid: 3d models for games, architecture, videos. (1493737)
turbosquid
$5
Grass Patch
...osquid
royalty free 3d model grass patch for download as fbx on turbosquid: 3d models for games, architecture, videos. (1579848)
turbosquid
$42
Brick Patch
...ty free 3d model brick patch for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1175884)
3d_export
free
decor patch
...decor patch
3dexport
horizontal decor element
turbosquid
$10
Patch Barstool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Patched Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Grass Patch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Flower patch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$27
Cement Patch - Tile
...royalty free 3d model cement patch - tile for download as fbx on turbosquid: 3d models for games, architecture, videos. (1493061)
Mk3
turbosquid
$50
cention mk3
...ty free 3d model cention mk3 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1454148)
turbosquid
$129
MK3 Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$100
Toyota Supra MK3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$44
cention mk3 low poly
...d model cention mk3 low poly for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1454666)
turbosquid
$30
Challenger I Mk3 Falcon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
American Frag hand grenade MK3
...free 3d model american frag hand grenade mk3 for download as on turbosquid: 3d models for games, architecture, videos. (1393624)
turbosquid
$20
Mk3 US Navy Combat Knife
...ty free 3d model mk3 us navy combat knife for download as fbx on turbosquid: 3d models for games, architecture, videos. (1172791)
3d_export
$29
Ford Fiesta MK3 Modified 3D Model
...7 tumerfx mtumer mehmet t?mer 1993 1995 1996 wrc special modifed modifiye
ford fiesta mk3 modified 3d model mtumer 30698 3dexport
3d_export
$99
Toyota Supra Mk3 19861993 3D Model
...ort fast coupe japan 1986 1987 1988 1989 1990 1991 1992 1993 tuning turbo
toyota supra mk3 19861993 3d model squir 62530 3dexport
turbosquid
$5
Timothy Oulton Mars Chair MK3
...on mars chair mk3 for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1209782)
Upgrade
turbosquid
$15
Upgraded Glock
...e 3d model upgraded glock for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1185950)
3ddd
$1
Calligaris / UPGRADE
...calligaris / upgrade
3ddd
calligaris
c материалом
3d_export
free
cz upgrade
...cz upgrade
3dexport
https://www.buymeacoffee.com/mestrezen3d https://linktr.ee/mestrezen3
turbosquid
$80
Custer Tank upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Domestos 1 upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Upgraded tea cup
...upgraded tea cup
3dexport
a cup with an unusual design and a unique shape for a more enjoyable tea experience
3d_export
$8
dixy outlander classic style upgraded poplar wood lounge chair
...utlander classic style upgraded poplar wood lounge chair
3dexport
dixy outlander classic style upgraded poplar wood lounge chair
turbosquid
free
AK-12 + Upgrades low-poly 3D model
...ow-poly 3d model for download as fbx, blend, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1501145)
evermotion
$700
Upgrade from V-ray 1.5 to 3.5 for 3ds max
...here is no need to purchase a new dongle - your current dongles will be reprogrammed to carry v-ray 3. evermotion 3d models shop.
evermotion
$300
Upgrade from V-Ray 2.0 to V-ray 3.5 for 3ds Max
... interface (gui) for editing settings on one machine and one render node for rendering on one machine. evermotion 3d models shop.
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Direction
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Rotation
3d_export
$5
rotation handle
...rotation handle
3dexport
rotation handle
3ddd
$1
ДуШ ROTATOR
...душ rotator
3ddd
душ
душ rotator
3d_export
$5
profile rotation handle
...profile rotation handle
3dexport
profile rotation handle
3d_export
$5
simple rotation handle
...simple rotation handle
3dexport
simple rotation handle
3d_export
$5
wrist rotation handle
...wrist rotation handle
3dexport
wrist rotation handle
3d_export
$5
needle rotation handle
...needle rotation handle
3dexport
needle rotation handle
3d_export
$5
heavy rotation handle
...heavy rotation handle
3dexport
heavy rotation handle
3d_export
$5
compound rotational handle
...compound rotational handle
3dexport
compound rotational handle
turbosquid
$29
rotating shelter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Rotating Armchair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware
3ddd
$1
RESTORATION HARDWARE
...restoration hardware
3ddd
restoration hardware , телескоп
restoration hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware, кресло,
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware , декоративный набор
restoration hardware
3ddd
$1
Restoration Hardware
...restoration hardware
3ddd
restoration hardware , декоративный набор
restoration hardware
3ddd
$1
Restoration Hardware
... hardware , боров , свинья
restoration hardware
3ddd
$1
Restoration Hardware
...ardware , корона , медведь
restoration hardware
3ddd
$1
Restoration Hardware
...ation hardware
3ddd
restoration hardware , тумба
тумба прикроватная restoration hardware
3ddd
free
Restoration Hardware
... кашпо , куст , свеча
restoration hardware
3ddd
free
Restoration Hardware
...restoration hardware
3ddd
restoration hardware
restoration hardware menlo table lamp
Display
3ddd
$1
Display
...display
3ddd
терминал
display computer 3d model
3d_export
$5
Display
...display
3dexport
display<br>verts 2.262<br>faces 3.928
turbosquid
$8
Display
...turbosquid
royalty free 3d model display for download as fbx on turbosquid: 3d models for games, architecture, videos. (1634534)
3ddd
$1
Display cabinet
...display cabinet
3ddd
витрина
display cabinet
turbosquid
$50
display
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
DISPLAY
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Display
...e 3d model display for download as ma, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1387472)
3d_export
$6
display stand
...display stand
3dexport
super market display stand
3d_ocean
$12
Display Case
...rnishing furniture glass storage vetrinetta white
a 3d model of a display case. the texture for the back of the case is provided.
3d_export
$30
Vehicle display
...vehicle display
3dexport
vehicle display consists of podium and vehicle cover no vehicle there is a veiled vehicle silhouette
Solution
3ddd
$1
Grammer / Solution
... кресло
офисное кресло solution фирмы grammer office. подробнее на www.grammer-office.com
3d_export
$48
TV Solution 3D Model
...solution 3d model
3dexport
tv solution interior dvd decor gypsum cornices spotlights
tv solution 3d model mr.kiwan 19449 3dexport
3d_export
$86
architectural solution 352a1
...architectural solution 352a1
3dexport
3dsmax 2017 3dsmax 2020 fbx obj map
3ddd
$1
Светильник польского производителя Aquaform Lighting Solution
...ution
3ddd
aquaform
светильник польского производителя aquaform lighting solution
модели:
tuba 111x1 distance
tuba 111x2 distance
3d_export
$20
lift internet solutions 3
...ly model of an industrial elevator. - materials are configured in 3ds max and corona render. - formats: fbx, obj, step, max 2020.
3ddd
$1
Светильник польского производителя Aquaform Lighting Solution
...
светильник польского производителя aquaform lighting solution
серия: tuba 111
модели:
tuba 111 on
tuba 111 on 23
tuba 111 on 34
3ddd
$1
Одинарный спот польского производителя Aquaform Lighting Solution
... aquaform
одинарный спот польского производителя aquaform lighting solution
модель: zuma 90
turbosquid
$25
Triple Hair Core Set Shampoo Serum Solution
... shampoo solution serum set for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1638904)
3ddd
$1
Поворотный светильник польского производителя Aquaform Lighting Solution
...воротный светильник польского производителя aquaform lighting solutionhttp://www.aquaformlighting.com/
модель: rotto
3ddd
$1
PotteryBarn ROLLING CABINET MEDIA SOLUTION
... телевизор , роллинг
279.4cm wide x 111.8cm high x 12.06cm deep
fits most 152.4cm tvs.