Thingiverse
PI-KVM ZeroW Case by Nashuar
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a case for a Pi-KVM based on a Raspberry Pi ZeroW with HDMI to CSI-2 bridge.
Project Website: https://pikvm.org/
Project GitHub: https://github.com/pikvm/pikvm
The mounting points on the lid are made for the following HDMI to CSI-2 bridge: https://www.aliexpress.com/item/4000102166176.html (Color: Black)
To mount the electronics you need:
8x M2x6 screws
8x printed spacers
Use the printed spacers to avoid the screws to touch the electronics. To close the lid begin to snap it in on the HDMI connector side. If the lid does not close well, check if there are tiny blobs on the top layer that prevent the lid to snap in properly.
15.03.2021 - Added a 15mm higher case to use RPi with heatsinks.25.03.2021 - Reworked the case and lid: thicker Walls, RPi slightly repositioned to access the sdcard and added a hole for HDMI out.02.04.2021 - Board standoffs improved
Project Website: https://pikvm.org/
Project GitHub: https://github.com/pikvm/pikvm
The mounting points on the lid are made for the following HDMI to CSI-2 bridge: https://www.aliexpress.com/item/4000102166176.html (Color: Black)
To mount the electronics you need:
8x M2x6 screws
8x printed spacers
Use the printed spacers to avoid the screws to touch the electronics. To close the lid begin to snap it in on the HDMI connector side. If the lid does not close well, check if there are tiny blobs on the top layer that prevent the lid to snap in properly.
15.03.2021 - Added a 15mm higher case to use RPi with heatsinks.25.03.2021 - Reworked the case and lid: thicker Walls, RPi slightly repositioned to access the sdcard and added a hole for HDMI out.02.04.2021 - Board standoffs improved
Similar models
thingiverse
free
Pi-KVM Case by Langelus
...used:
raspberry pi 4
usb-c/pwr splitter from tindie (no barrel jack)
lusya standard hdmi to csi-2 adapter board from ali express
thingiverse
free
Rack Case for Pi KVM (Raspberry pi 4) by colanabo
...d hdmi to csi-2 circuit board)
some small screws are needed to mount the circuit boards
link to pi kvm project: https://pikvm.org
thingiverse
free
PI-KVM Case With HDMI to CSI C779 Module by kai
...e card for pi-kvm.
i also remove the top oled mount because it will not fit with the larger c779 module.
working on the base now.
thingiverse
free
PIKVM Geekworm Remix by wtopace
...m style hdmi to csi-2 module (https://www.amazon.com/gp/product/b0899l6zxz/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=utf8&psc=1).
thingiverse
free
PiKVM case (LCD+ATX) by hamele0n
...x board is included.
lcd screen: https://a.aliexpress.com/_9rsr8z
long screws: m2.5*30
https://easyeda.com/al.pankov/zerow-kvm-v2
thingiverse
free
Conix's PI-KVM case by conix67
...simply need a remote ip-kvm solution without atx power control/monitor, the case can be used without the atx power control board.
thingiverse
free
pikvm zero by badsmoke
...smoke
thingiverse
a housing for the pikvm as pizero
as a suitable csi-hdmi module i have used this
print settings:
0.2 layerhigh
thingiverse
free
USB-C/PWR Splitter case by Manulin
...use this adaptor to build a pi-kvm (hardware v2 https://github.com/pikvm/pikvm#diy-getting-started).
a m3x12mm screw is required.
thingiverse
free
Simple PiKVM Case by rstcologne
...ions are required.
case is modeled around this pi-model:https://grabcad.com/library/raspberry-pi-4-model-b-1
thanks for sharing.
thingiverse
free
Raspberry Pi Camera V2 HDMI Case
...uires 4 m2 x 15mm screws (or 20mm) + 2 m3 screws (variable length).
i went with the arducam csi to hdmi cable extension module.
Zerow
thingiverse
free
pi zeroW+usb_hub+3d_printed_case by taltoris
...dafruit's excellent 4 port usb hub.
the first iteration turned out great, but i'm continuing to make changes. stay tuned.
thingiverse
free
Raspberry Pi ZeroW case by jef41
...the act led status. i also modified the lid slightly, i found that the original was too loose and would not hold itself in place.
thingiverse
free
Anycubic i3 Mega Pi zeroW camera mount by jonprogers
... z axis as the print continues.
motion software (https://sourceforge.net/projects/motion/) installed on pi to provide webstream,.
thingiverse
free
Raspberry Pi ZeroW case by ulrikk
...o it in fusion.
finality i intend to spray the inside with graphite to screen the zero to reduce interference with the dji drone.
thingiverse
free
Pi ZeroW case with screws and CS mount by sej7278
...er to find than m2.5
added a new version with a c/cs lens mount (and m12 mount within it) with the camera module inside the case.
thingiverse
free
Elegoo Mars PI ZeroW Case
... one.
to mount this to your mars you will need 2 x m3x8 flat head socket screws since the original screws aren't long enough.
thingiverse
free
Hacked case for 2x16 LCD display with Pi-ZeroW by plainman98
...erry pi. it is what it is. vhb double-stick tape holds the lcd in place and the cover is screwed together with leftover screws.
thingiverse
free
RaspberryPi ZeroW Notification Module by wagnerjw
...for myself...
the 4 corner holes now accommodate m3x50mm hex bolts with a 5.5x5mm countersink in the bottom for the bolt nuts...
thingiverse
free
Torch mount by sej7278
...thingiverse i needed a way to illuminate my pi zerow microscope setup, so decided to use my new flashlight...
Kvm
3dfindit
free
KVM W
...kvm w
3dfind.it
catalog: wiska
3dfindit
free
KVMS Z
...kvms z
3dfind.it
catalog: wiska
3dfindit
free
KVM Z
...kvm z
3dfind.it
catalog: wiska
3dfindit
free
KVM VG
...kvm vg
3dfind.it
catalog: wiska
3dfindit
free
KVMS W
...kvms w
3dfind.it
catalog: wiska
3dfindit
free
EX-KVM-Z
...ex-kvm-z
3dfind.it
catalog: wiska
3dfindit
free
EX-KVM-W
...ex-kvm-w
3dfind.it
catalog: wiska
thingiverse
free
KVM Table Holder (StartTech) by squirtle_93
...holder (starttech) by squirtle_93
thingiverse
kvm holder for the 2 port dual displayport usb kvm switch.
you also need 4 screws.
thingiverse
free
KVM Controller Stand by JGlass
...4 controller from amazon, by manufacturer mt-viki, but it should be the right size for the controllers for their other kvm units.
thingiverse
free
KVM VGA Connector Holder by JonJeffels
...kvm vga connector holder by jonjeffels
thingiverse
holder for the vga connectors for our kvm to allow easy cable management
Pi
design_connected
$11
Pi
...pi
designconnected
ligne roset pi chairs computer generated 3d model. designed by thibault desombre.
3d_export
$5
raspberry pi
...raspberry pi
3dexport
carcasa para la raspberry pi
turbosquid
$18
pied
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люста emme pi light
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
бра классическое emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
design_connected
$16
Pi-Air
...pi-air
designconnected
living divani pi-air lounge chairs computer generated 3d model. designed by harry & camila.
3d_ocean
$15
Manneken Pis
...picting a naked little boy urinating into a fountain’s basin. (wikipedia) the model was sculpted in blender 2.70a rendered wit...
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люстра классическая фирма: emme pi light
артикул: 3595/5/cot/12/wh
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.