OrangePi Zero Mount for AM8 Frame (20x20 Aluminium extrusion) by DarkR3ign 3d model
3dmdb logo
Thingiverse
OrangePi Zero Mount for AM8 Frame (20x20 Aluminium extrusion) by DarkR3ign

OrangePi Zero Mount for AM8 Frame (20x20 Aluminium extrusion) by DarkR3ign

by Thingiverse
Last crawled date: 3 years ago
A simple mount for an OrangePi Zero and a voltage regulator on a regular 20x20 Extrusion.
Use M5x8 Screws to mount it to the frame and M3x3 - M3x8 screws to screw the OrangePi into place.
The regulator does not have any screwsholes, so just use glue here.
You can find the voltage regulator here:https://www.banggood.com/DC-DC-Buck-Module-6-24V-12V24V-to-5V-3A-USB-Step-Down-Power-Supply-Charger-Efficiency-97_5-p-1103973.html
The OrangePi Zero is Version One (Allwinner H2)https://www.banggood.com/Orange-Pi-Zero-H2-Quad-Core-Open-source-512MB-Development-Board-p-1110210.html
I dont know if the OrangePi Zero Plus (H5) or Zero Plus 2 (H3/H5) have the same distances between screws, but from the pictures it looks very similar.

Tags