Thingiverse
Orange PI Zero NAS by rumbero71
by Thingiverse
Last crawled date: 3 years, 1 month ago
As I wrote in another thing (https://www.thingiverse.com/thing:2584248), I did like the original design quite much so I decided to stick to it in other projects.
In a recent shopping spree at Aliexpress, I aquired an OrangePI Zero NAS expansion board which basically adds a SATA port, two USBs and an mSATA slot to the OrangePI Zero. One shouldn't expect too much performance-wise since the SATA and mSATA are still connected to the OrangePI's USB2 ports. It makes however for a nice little fileserver e.g. as a backup for an existing NAS. OpenMediaVault 3 runs quite well on it.
In order to build this you would need:
-OrangePI Zero original (the one with the H2+ processor and 100MBit Ethernet, the "plus" version is still quite beta)
-OrangePI Zero NAS expansion board
-At least 8GB uSDHC (the faster and bigger, the better)
-mSATA drive if desired
-2.5" SATA drive if desired (would need an additional SATA/Power cable)
-Case mount uUSB socket with cable and uUSB plug
-Case mount USB A socket w/cable and USB A plug
-3mm LED w/ resistor and mount,
-USB A plug w/ solder connectors
-15x15mm or 20x20mm heat sink with adhesive pad
-20mm Fan (REALLY necessary !)
-3mm light conducting plastic fiber (for the OrangePI's status LEDs)
-3mm screws and nuts
Assembly should be quite easy:
-Screw in the fan first
-The lower USB hole is for the "A" connector. Screw that in
-Add the mSATA to the NAS board
-Put the heat sink on the OrangePI, connect the PI to the NAS board
-Screw in the whole assembly
-If a SATA drive is used, connect the cable to the drive and mount the drive to the case
-Mount the uUSB above the SATA drive
-Connect the uUSB to the OrangePI
-Connect the USB A to the NAS board
-Connect the SATA and Power cables to the NAS board
-Cut the light conducting plastic so it ends flush at the front and overlaps the OrangePI's LEDs
-Chamfer the LED-ends ot the light conducting plastic
-Put in the two pieces and fix their LED-ends with some hot glue over the respective LEDs
-Mount the 3mm LED
-Solder the LED w/ resistor (do NOT forget that one!) and the Fan to the USB plug and put that in
In a recent shopping spree at Aliexpress, I aquired an OrangePI Zero NAS expansion board which basically adds a SATA port, two USBs and an mSATA slot to the OrangePI Zero. One shouldn't expect too much performance-wise since the SATA and mSATA are still connected to the OrangePI's USB2 ports. It makes however for a nice little fileserver e.g. as a backup for an existing NAS. OpenMediaVault 3 runs quite well on it.
In order to build this you would need:
-OrangePI Zero original (the one with the H2+ processor and 100MBit Ethernet, the "plus" version is still quite beta)
-OrangePI Zero NAS expansion board
-At least 8GB uSDHC (the faster and bigger, the better)
-mSATA drive if desired
-2.5" SATA drive if desired (would need an additional SATA/Power cable)
-Case mount uUSB socket with cable and uUSB plug
-Case mount USB A socket w/cable and USB A plug
-3mm LED w/ resistor and mount,
-USB A plug w/ solder connectors
-15x15mm or 20x20mm heat sink with adhesive pad
-20mm Fan (REALLY necessary !)
-3mm light conducting plastic fiber (for the OrangePI's status LEDs)
-3mm screws and nuts
Assembly should be quite easy:
-Screw in the fan first
-The lower USB hole is for the "A" connector. Screw that in
-Add the mSATA to the NAS board
-Put the heat sink on the OrangePI, connect the PI to the NAS board
-Screw in the whole assembly
-If a SATA drive is used, connect the cable to the drive and mount the drive to the case
-Mount the uUSB above the SATA drive
-Connect the uUSB to the OrangePI
-Connect the USB A to the NAS board
-Connect the SATA and Power cables to the NAS board
-Cut the light conducting plastic so it ends flush at the front and overlaps the OrangePI's LEDs
-Chamfer the LED-ends ot the light conducting plastic
-Put in the two pieces and fix their LED-ends with some hot glue over the respective LEDs
-Mount the 3mm LED
-Solder the LED w/ resistor (do NOT forget that one!) and the Fan to the USB plug and put that in
Similar models
thingiverse
free
OrangePi Zero 2 case ( USB, Ethernet, Power )
...de and is mounted to the case using at least 2 m3 screws
cover is clicked to the case.
in my house, opiz2 is used as mqtt server.
thingiverse
free
Raspberry Pi B+ case with 2.5" hard drive mount by gilfillan94
...quot; hard drive, usb cables can be routed and plugged in internally to keep it tidy.
all screw holes are intended for m3 screws.
thingiverse
free
2.5 inch SATA Drive Caddy for Raspberry Pi 4 + CanaKit Case by keyboard_monkey
... on the raspberry pi 4, you can power and run a headless server booting and running on an ssd drive with just one ethernet cable.
thingiverse
free
DC-DC LM2596 by ILYAS_HA
...,5) , hole d=3mm (screw hat up to 1.5)
later i will lay out the models for connecting the "usb connectors and terminal block
thingiverse
free
Raspberry Pi Zero W Case and Mount by clearchris
...amera cable, sd card and pins.
to use the case, you will need to drill the rpizw mount holes out to 3mm.
freecad source provided.
thingiverse
free
USB Dongle Case for Raspberry Pi Zero W by kapakahi
...soldering wires to pads. use #4 3/8" screws or similar in...
thingiverse
free
SSD Drive Case - Samsung 256GB Internal 2.5"
...ditional screws and nuts needed if using the cable mount)
2 - m3 nuts
2 - m3 10 mm flat head screw
2 - m3 12 mm button head screw
thingiverse
free
External mSATA USB enclosure mount for Quattro RPi cases by Authenticaco
...he enclosure on its side outside the case. the enclosure itself also slides into the mount snugly. no need for tools or anything.
thingiverse
free
HDD caddie by goraxe
...ddie for external mounting hdds.
features
guide holes for mounting the hdd
hole to allow a usb/sata cable to connect to the drive
thingiverse
free
3.5 " SATA HDD Enclosure by organicap
...(there is a cutaway in its front to accommodate such an adapter).
i use this combination as an external clone of my system drive.
Rumbero71
thingiverse
free
Waveshare 5in LCD Stand by rumbero71
...waveshare 5in lcd stand by rumbero71
thingiverse
just a simple stand for a waveshare 5in lcd (b) display
thingiverse
free
Lack FrankenTable by rumbero71
...a set of two, a smaller one of 60x40 and a bigger one) and the legs of two additional square lack tables into an auxiliary table.
thingiverse
free
RFtoy bumper by rumbero71
...ication. unfortunately, there is no case / cover for it which makes handling it a bit cumbersome. this little bumper should help.
thingiverse
free
PlugUp U2F Key Case by rumbero71
...o71
thingiverse
a case reinforcing the flimsy plugup u2f key w/ a sleeve protecting the contacts.
print at 0.1mm w/ 0.4mm nozzle
thingiverse
free
Fitbit Flex Charge Holder by rumbero71
...antly flipping over making it impossible to see if it charges -the contact mechanism is somewhat suboptimal. now it stays put :-)
thingiverse
free
Gscheiduino Case by rumbero71
...a2-clon.html
since unfortunately the pcb does not exactly match the arduino specs, i did have to tinker esquilos design again :-)
thingiverse
free
C.H.I.P. w/ OLED HAT case by rumbero71
... some improvements on the connector side.
the eagle files for that dip can be found at https://github.com/rumbero71/chip-multidip
thingiverse
free
Long cable clips by rumbero71
... ceiling, especially when using a semi transparent cable. i printed those clips in transparent petg w/ 0.4mm nozzle, 0.15mm layer
thingiverse
free
The Button - Remix by rumbero71
...liberty of just increasing the thickness of the mounting plate since the original design seemed a bit flimsy to me at that point.
thingiverse
free
Anet A8 Webcam Mount by rumbero71
...ey are too slick and the angle was not good.
this plate is designed to be mounted on top of the right z-axis stepper motor plate.
Zero
3ddd
$1
ZERO, BEAM
...zero, beam
3ddd
zero
поворотная люстра zero , beam
design_connected
$9
Zero-in
...zero-in
designconnected
established & sons zero-in tables computer generated 3d model. designed by jay osgerby .
3ddd
free
Sub-Zero
...sub-zero
3ddd
sub-zero , голова
sub-zero corona render!
3ddd
$1
Metalspot / Zero
...metalspot / zero
3ddd
metalspot
metalspot zero
3ddd
$1
Catalano Zero
...catalano zero
3ddd
catalano , унитаз
catalano zero
3ddd
$1
SUB ZERO
... sub zero
the first and only 3d model of sub zero refrigerator.
the model is very accurate.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Zero
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
ZERO / Hide
...zero / hide
3ddd
zero
polys: 25486
wire-spline
Orange
3d_ocean
$9
Oranges
...oranges
3docean
bowl citrus decoration fruit fruits grapefruit healthy orange oranges vitamine
a bowl of oranges
design_connected
$16
Oranges
...oranges
designconnected
smallaccents oranges computer generated 3d model.
3d_ocean
$4
Half Orange
...half orange
3docean
fruit half half orange orange
half orange
3d_export
free
orange
...orange
3dexport
orange lowpoly<br>fr fruis and vegetables collection
3d_ocean
$5
Orange
...ma 4d dae food fruit fruits illumination obj orange realistic round seed slice texture
a realistic orange (whole,half and slice).
3d_export
$10
orange
...orange
3dexport
turbosquid
$20
Orange
...
turbosquid
royalty free 3d model orange for download as fbx on turbosquid: 3d models for games, architecture, videos. (1493486)
turbosquid
$14
Orange
...
turbosquid
royalty free 3d model orange for download as obj on turbosquid: 3d models for games, architecture, videos. (1606041)
turbosquid
$13
Orange
...
turbosquid
royalty free 3d model orange for download as lxo on turbosquid: 3d models for games, architecture, videos. (1568231)
turbosquid
$10
orange
...
turbosquid
royalty free 3d model orange for download as max on turbosquid: 3d models for games, architecture, videos. (1662582)
Pi
design_connected
$11
Pi
...pi
designconnected
ligne roset pi chairs computer generated 3d model. designed by thibault desombre.
3d_export
$5
raspberry pi
...raspberry pi
3dexport
carcasa para la raspberry pi
turbosquid
$18
pied
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люста emme pi light
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
бра классическое emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
3ddd
$1
Emme Pi Light
...emme pi light
3ddd
emme pi light
design_connected
$16
Pi-Air
...pi-air
designconnected
living divani pi-air lounge chairs computer generated 3d model. designed by harry & camila.
3d_ocean
$15
Manneken Pis
...picting a naked little boy urinating into a fountain’s basin. (wikipedia) the model was sculpted in blender 2.70a rendered wit...
3ddd
$1
Emme pi light
...emme pi light
3ddd
emme pi light
люстра классическая фирма: emme pi light
артикул: 3595/5/cot/12/wh
Nas
design_connected
$13
Na Xemena lounger
...na xemena lounger
designconnected
gandia blasco na xemena lounger computer generated 3d model. designed by gandia-blasco, jose.
3d_export
$15
nas storage
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$20
Table dr Na
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
RAID NAS 4TB
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Aromas NA 777
...dd
aromas
люстра aromas na 777
1500mm x 200mm x 1140mmhttp://www.aromasdelcampo.com/ficha.php?f=4&t;=2&id;=130
design_connected
$18
New Antiques NA/1CB
... antiques na/1cb
designconnected
cappellini new antiques na/1cb chairs computer generated 3d model. designed by marcel wanders.
3ddd
$1
QNAP NAS Server
...qnap nas server
3ddd
сервер
сервер, сетевой накопитель.
polys/verts 41711/51066
turbosquid
$25
CIWL Boxcar NA 1259
...d model ciwl boxcar na 1259 for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1470438)
turbosquid
$9
Chandra rugs NAS-13702
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Chandra rugs NAS-13701
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.