Olympus Micro Four Thirds Screw In Lens Cap by Ottonet 3d model
3dmdb logo
Thingiverse
Olympus Micro Four Thirds Screw In Lens Cap by Ottonet

Olympus Micro Four Thirds Screw In Lens Cap by Ottonet

by Thingiverse
Last crawled date: 2 years, 11 months ago
I lost My Olympus OM-D E-M10 Mk3 lens cap in an outdoor photo session.
I could buy a bunch of those for a few bucks on Amazon, but I decided to print it by myself, instead.
Here on Thingiverse a good number of interesting clip-in lens caps can be found, but in many cases, the spring mechanism is too near to the lens, which risks to be scratched.
There are screw-in caps, too, but I found them too basic for my tastes.
So here is my version.
The cap is tall enough to avoid any interference with the lens glass
The thread is very accurate, after some post-print cleaning, it just screws in with no effort
Once scrwewed in, the logo stays horizontal for everybody to see.

Tags