Thingiverse
Nema17FilamentGuide by teinturman
by Thingiverse
Last crawled date: 3 years, 1 month ago
The Nema17 filament Guide 's is my recommended filament guide to be used with the teinturman's enclosure, and the Prusa I3 rework 1.5 printer from emotiontech.
The spool holder can be put on the left side of the printer, within the enclosure.
The filament guide is attached to the NEma17 motor of the X axis of the printer.
The guide will then move when the Z axis will move.
I have been trying this now for more than one month, and it works perfectly.
Note : you may want to check my enclosure for 3D printer :http://www.thingiverse.com/thing:1637043
and my recommended spool Holder :http://www.thingiverse.com/thing:1640529
The spool holder can be put on the left side of the printer, within the enclosure.
The filament guide is attached to the NEma17 motor of the X axis of the printer.
The guide will then move when the Z axis will move.
I have been trying this now for more than one month, and it works perfectly.
Note : you may want to check my enclosure for 3D printer :http://www.thingiverse.com/thing:1637043
and my recommended spool Holder :http://www.thingiverse.com/thing:1640529
Similar models
thingiverse
free
Teinturman 's spool holder by teinturman
... for 3d printer :http://www.thingiverse.com/thing:1637043
and my nema 17 filament guide :http://www.thingiverse.com/thing:1647053
thingiverse
free
Filament Guide Ikea Lack enclosure horizontal spool holder by Guigs
...ulley :https://www.thingiverse.com/thing:2540231
universal spool holder :https://www.thingiverse.com/thing:508896
thanks makers !
thingiverse
free
Creality CR10 wheel filament guide: Z mounting
...ng:3886519
there is another version when used with multiple spool above the command box:https://www.thingiverse.com/thing:2924657
thingiverse
free
Customizable Replicator Spool Holder with Filament Guide by laird
...d by fitting into the slider in the parent design, the filament holder can be adjusted to suit the particular filament and spool.
thingiverse
free
Filament Guide for http://www.thingiverse.com/thing:216117 by komadojiro
...hingiverse.com/thing:216117.
3 pieces are plugged into spool holder.
it may achieve centering guide for filament at spool holder.
thingiverse
free
Wide Filament Guide for HICTOP 3D Printer 3DP11 by tcm0116
...holder (http://www.thingiverse.com/thing:1241566), but the original filament guide was too narrow to accommodate the spool holder
thingiverse
free
Filament guide Prusa i3 MK2 by arabon
...l holder from:http://www.thingiverse.com/thing:32204 and placed it behind the printer. designed a filament guide for the printer.
thingiverse
free
Biqu B1 second filament spool holder by nxbalazs
...ilament spool holder for biqu b1.
recommend to use with filboyt's filament guider - https://www.thingiverse.com/thing:2917932
thingiverse
free
Filament spool holder by BoopidooDesigns
...ns
thingiverse
a filament spool holder made to fit the kajakmannen plexiglass enclosure: http://www.thingiverse.com/thing:125599
thingiverse
free
Filament guide for Hephestos 2 Multiple filament spool holder by Turinete
...urinete
thingiverse
filament guide for the "multiple filament spool holder" : http://www.thingiverse.com/thing:2286672
Teinturman
thingiverse
free
Customizable Atomizer support by teinturman
...zable atomizer support by teinturman
thingiverse
this is an ultra simple atomizer stand, that can be customized to your needs...
thingiverse
free
Teinturman 's spool holder by teinturman
... for 3d printer :http://www.thingiverse.com/thing:1637043
and my nema 17 filament guide :http://www.thingiverse.com/thing:1647053
thingiverse
free
Parametric Pipe Adapter by teinturman
...internal diameter , external diameter and height of each size, then print the adapter !
you can also add bevel percentage value.
thingiverse
free
Photo Stand Repaired by teinturman
...e/8718475814511/support-de-fond-pour-studio-photo-300-cm-sans-toile?gclid=eaiaiqobchmih5sy0_hh1givcxibch00mgikeaqyasabegk2jvd_bwe
thingiverse
free
teinturman's 3D Printer enclosure by teinturman
...ed spool holder :http://www.thingiverse.com/thing:1640529
and my nema 17 filament guide :http://www.thingiverse.com/thing:1647053
thingiverse
free
Plate for Hama Star 61 tripod by teinturman
...screw locked on the plate, even when there is no camera on it.
i use 2,5*10mm wood screws to lock the 2 parts together.
enjoy ...
thingiverse
free
Caribean Pirates Compass by teinturman
... the thing your realy prefer...
ta ta ta .... ta ta ta ta ..... ta .... ta ti ta .... ta ..... ta ta taaaaaaaa.
thingiverse
free
Customizable Atomizer box for Travellers by teinturman
...close with a click ... ( thanks to the 2 spheres )
nothing special for the build... i used 20% infill.
supports are not needed...
thingiverse
free
Mini Video Skate by teinturman
...l probably work as well, but being less steady...
i used 1 m3, 4cm rod.
and 5 small wood screws ( 13mm)
can't be cheaper.
...