Neewer ringlight to clip-on gooseneck adapter by filiptw

Last crawled date: 3 years, 4 months ago

Adapter for the type of gooseneck camera arm which has a ball joint and a clip plate to the cheapest ringlight Neewer has on offer.
The gooseneck arm I have: https://smile.amazon.co.uk/gp/product/B07CYPF8RD
The ringlight: https://smile.amazon.co.uk/gp/product/B07QM76BF6
The adapter may also fit numerous knockoffs of both the gooseneck and the ringlight. To check if it will fit your gooseneck or other type of arm with a similar clip plate, print the "Test" STL first. If you can push that in securely, you're good to go. The main STL will be a tighter but more secure fit.
Assembly instructions:
Remove the ringlight from the stand it came with
Loosen the screw that held the ringlight to the stand enough to be able to push the round end of the adapter in
Orient the adapter so that you can screw that retaining screw into the hole in the print
Tighten the screw. It may squeak as it taps into the plastic, this is expected.
Clip the foot of the adapter into the clip plate of the gooseneck mount (you may need to remove the existing GoPro-style mount depending on the model)