Thingiverse
Makerfront i3Pro Printer Feet by ehughes100
by Thingiverse
Last crawled date: 3 years, 1 month ago
Inspired by i3PRO feet by strangeagent
Each foot of a MakerFront printer is like a wood scraper. After one of the feet I initially printed broke because a bracket got in the way, I decided to design my own.
My MakerFront i3ProXL printer has 8 feet. 6 feet are normal. 2 feet are different, requiring a wedge cut out for a perpendicular bracket.
A standard sized MakerFront printer as 6 feet. 2 are corner feet. 2 feet are different, requiring a wedge cut out for a perpendicular bracket. 2 are normal feet
I have attached OpenScad code and STL files. The GenericFoot will fit on any foot (except the corner feet of standard size).
Feel free to customize in OpenScad to your taste. All STL files have been tested on the standard and XL model.
Each foot of a MakerFront printer is like a wood scraper. After one of the feet I initially printed broke because a bracket got in the way, I decided to design my own.
My MakerFront i3ProXL printer has 8 feet. 6 feet are normal. 2 feet are different, requiring a wedge cut out for a perpendicular bracket.
A standard sized MakerFront printer as 6 feet. 2 are corner feet. 2 feet are different, requiring a wedge cut out for a perpendicular bracket. 2 are normal feet
I have attached OpenScad code and STL files. The GenericFoot will fit on any foot (except the corner feet of standard size).
Feel free to customize in OpenScad to your taste. All STL files have been tested on the standard and XL model.
Similar models
thingiverse
free
Makerfront i3ProXL Extended YStop Bracket by ehughes100
...licer (slic3r). send g-code to printer.
be sure to print out an y-axis endstop limit switch bracer for i3pro to go along with it.
thingiverse
free
Customizable Makerfront i3Pro Glass Bed Corner Bracket by ehughes100
...y direction.
customize this in openscad (free). export to stl. slice in your favorite slicer (slic3r). send g-code to printer.
thingiverse
free
i3PRO Feet Anchor by joshuarkendrick
... desk or furniture. this small addition also will prevent the printer from sliding or jerking while performing high-speed prints.
thingiverse
free
i3PRO feet. by strangeagent
... printer to stop the vibrations. you can print 6 if you like because there are actually 6 points of contact.
www.makerfront.com
thingiverse
free
Foot for MH3000 Printer by gregsmith_to
... to make a different sized rectangular block with sloping sides and rounded edges, that has a rectangular depression in the top.
thingiverse
free
Y-Axis endstop limit switch bracer for i3PRO by artdavis
...stop bracket of the i3pro. then both bolts thread into the nuts in the bracer to hold the switch tightly in in place and upright.
thingiverse
free
30mm roundover bracket decorative bottom with foot by DougM
...but as it turns out it's kind of cool for my first 3d printer base, so i made these corner brackets with little feet on them.
thingiverse
free
Simple Rod Bushing For MaketFront i3PRO by joshuarkendrick
...ing for maketfront i3pro by joshuarkendrick
thingiverse
simple rod bushing that slips over threaded rod on the makerfront i3pro.
thingiverse
free
AM8 Adjustable Feet
... ensure that they clear the shaft of the feet)
prints required
2 x am8_adjustable_foot_right.stl
2 x am8_adjustable_foot_left.stl
thingiverse
free
Nest Audio Corner Bracket by thooijer
...eecad to design it.
there are 2 stl's with different holes.
when i mounted v2 i would rather have v3 to level it a bit... :-)
Ehughes100
thingiverse
free
Double Fidget Caps - Print with No Supports by ehughes100
...ts by ehughes100
thingiverse
take your two favorite spinners and combine them into a double fidget.
https://youtu.be/ah5vdgbpixo
thingiverse
free
Makerfront i3ProXL Extended YStop Bracket by ehughes100
...licer (slic3r). send g-code to printer.
be sure to print out an y-axis endstop limit switch bracer for i3pro to go along with it.
thingiverse
free
Asymmetric Balanced Fidget Spinner: Penny, Nickel, Quarter by ehughes100
...ights. the calculation that went in to figuring out what angles each lobe needed to be in relation to each other is pretty neat.
thingiverse
free
Concave Fidget Caps - No Supports by ehughes100
...to make want i wanted.
this printed well for me with .2mm layers using petg. i did not try any other layer heights or materials.
thingiverse
free
iPhone heavy Dock - Customize by ehughes100
...un the test blocks first to make sure everything will fit.
i leveraged a lot of code from "iphone 5 dock v2 by okatake"
thingiverse
free
Customizable Power switch box by ehughes100
...nto the box.
customize this in openscad (free). export to stl. slice in your favorite slicer (slic3r). send g-code to printer.
thingiverse
free
Customizable Makerfront i3Pro Glass Bed Corner Bracket by ehughes100
...y direction.
customize this in openscad (free). export to stl. slice in your favorite slicer (slic3r). send g-code to printer.
thingiverse
free
Customizable GPS Sun Shade Visor by ehughes100
...i can only use my visor from october through march. it might work better in white, but that is a lot of glare on the windshield.
I3Pro
thingiverse
free
i3PRO feet. by strangeagent
... printer to stop the vibrations. you can print 6 if you like because there are actually 6 points of contact.
www.makerfront.com
thingiverse
free
Geetech I3PRO B by Alfarek
...geetech i3pro b by alfarek
thingiverse
obudowa do xcr3d
thingiverse
free
Simple Rod Bushing For MaketFront i3PRO by joshuarkendrick
...ing for maketfront i3pro by joshuarkendrick
thingiverse
simple rod bushing that slips over threaded rod on the makerfront i3pro.
thingiverse
free
i3pro B cyclops & bltouch by jfmsw
...se.com/thing:1747443
suitable for geeetech i3pro b
cyclops (cn, clone)
bltouch
by using https://www.thingiverse.com/thing:1747443
thingiverse
free
i3PRO Filament Guide by strangeagent
...e filament was scraping across the top of the frame...and it was driving me nuts. use support when printing.
www.makerfront.com
thingiverse
free
i3PRO Feet Anchor by joshuarkendrick
... desk or furniture. this small addition also will prevent the printer from sliding or jerking while performing high-speed prints.
thingiverse
free
Stabilizer fo Geeetech Prusa I3pro W by Olduino
...stabilizer fo geeetech prusa i3pro w by olduino
thingiverse
stabilaze the z axis
thingiverse
free
Display mount for the RepRapDicount Full Graphic Smart Controller for the i3PRO by artdavis
...roller can be bolted on directly or using a case that has a matching hole pattern such as:http://www.thingiverse.com/thing:563515
thingiverse
free
Makerfront i3PRO threaded rod bushing for frame top by artdavis
... the z-feed from popping the bushing out then just snug down a zip tie in the channel around the cylinder once it's in place.
thingiverse
free
Y-Axis endstop limit switch bracer for i3PRO by artdavis
...stop bracket of the i3pro. then both bolts thread into the nuts in the bracer to hold the switch tightly in in place and upright.
Makerfront
thingiverse
free
Makerfront MK8 Cooler Duct Mount by MooseAMoose
...w to secure the fan duct.
this is the ring duct i utilized.http://www.thingiverse.com/thing:2004786
first project in fusion 360 .
thingiverse
free
Makerfront i3ProXL Extended YStop Bracket by ehughes100
...licer (slic3r). send g-code to printer.
be sure to print out an y-axis endstop limit switch bracer for i3pro to go along with it.
thingiverse
free
Makerfront i3PRO threaded rod bushing for frame top by artdavis
... the z-feed from popping the bushing out then just snug down a zip tie in the channel around the cylinder once it's in place.
thingiverse
free
MAKERFRONT Full Graphic LCD Mount by RoyalMaker
...ith a cutaway for the sd card. no need for pliers to
take sd card out. that would be the file named: final_of_lcd12864_holder.stl
thingiverse
free
MAKERFRONT Y End Stop Shim by RoyalMaker
... 6 months with no problems.
i also used a nylon washer under the nut where it touches the end stop.
you could probably print one.
thingiverse
free
Cable Drag Chain for MakerFront i3PRO by joshuarkendrick
...e.
i have included the original files. so, if you feel like trying to customize it, feel free.
if you have questions, please ask.
thingiverse
free
Basic Filament Guide for MakerFront i3Pro Ver. 2 by joshuarkendrick
...ngerous. acetone is extremely flammable. polish in well ventilated area and at own risk. always wear proper protective equipment.
thingiverse
free
MakerFront Bed Level Tester - Prusa i3 - Digital Depth Gauge Adapter by Jase3D
...ll try to do it later. printed with abs, sideways.
purchase the digital gauge here:
https://www.amazon.com/gp/product/b01m103o7h
thingiverse
free
Customizable Makerfront i3Pro Glass Bed Corner Bracket by ehughes100
...y direction.
customize this in openscad (free). export to stl. slice in your favorite slicer (slic3r). send g-code to printer.
Feet
3d_export
$30
Legs and feet High feet 3D Model
...t high feet 3d model
3dexport
feet shoes sandal barefoot leg women
legs and feet high feet 3d model adrianaamerina 96817 3dexport
3ddd
$1
DUCK FEET LAMP
...duck feet lamp
3ddd
утка
duck feet lamp
turbosquid
$19
Feets 01
...3d model feets 01 for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1624047)
turbosquid
$2
Robo3D Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Hands and Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Feet study
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Female Feet 01
...oyalty free 3d model feet 01 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1446069)
turbosquid
$19
The feet of Hercules trainer
... feet of hercules trainer for download as , stl, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1684923)
turbosquid
$79
Hand and Feet (Rigged)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Viabizzuno Big Feet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.