Thingiverse
Improved GTS10XC start stop button by mageb
by Thingiverse
Last crawled date: 3 years, 4 months ago
The start/stop button is a safety feature of your table saw. So I do not recommend to replace the original parts. If you do what I did, you do it at your own risk!
The original start/stop button attachment of the Bosch GTS10XC is not very good. There are alternative designs, but they still are far from what I was looking for. So I decided to design my own version.
It consists of three parts:
the lever: print it placed on its side using red filament, 0.2mm layer height, 3 perimeters, 25% infill. You will need support only at the hole for the axis (see screenshot). Paint-on-support in the new Prusaslicer 2.3.0 is great for this.
the button: I decided to do a two color design. Print the button in 0.2mm layer height using green filament. For layers 3 to 5 switch to yellow filament (see screenshot)
the trigger: print it in any color you like in 0.15mm layer height. This is important to make the bridging trick work for the upside down screw holes (see screenshot).
The trigger might have to be sanded slightly, so that the switch moves smoothly. Use 2 M4x10 screws to attach the trigger to the button.
You might have to partially drill the axis hole using a 3.5mm drill.
As always, my design has been created using OpenSCAD. Due to rounding errors (happens to me quite often when using OpenSCAD in combination with Prusaslicer) the lever STL file had to be repaired using an online service.
Happy printing! - And then please post a Make! Thank you very much!
The original start/stop button attachment of the Bosch GTS10XC is not very good. There are alternative designs, but they still are far from what I was looking for. So I decided to design my own version.
It consists of three parts:
the lever: print it placed on its side using red filament, 0.2mm layer height, 3 perimeters, 25% infill. You will need support only at the hole for the axis (see screenshot). Paint-on-support in the new Prusaslicer 2.3.0 is great for this.
the button: I decided to do a two color design. Print the button in 0.2mm layer height using green filament. For layers 3 to 5 switch to yellow filament (see screenshot)
the trigger: print it in any color you like in 0.15mm layer height. This is important to make the bridging trick work for the upside down screw holes (see screenshot).
The trigger might have to be sanded slightly, so that the switch moves smoothly. Use 2 M4x10 screws to attach the trigger to the button.
You might have to partially drill the axis hole using a 3.5mm drill.
As always, my design has been created using OpenSCAD. Due to rounding errors (happens to me quite often when using OpenSCAD in combination with Prusaslicer) the lever STL file had to be repaired using an online service.
Happy printing! - And then please post a Make! Thank you very much!
Similar models
thingiverse
free
Theta Token Logo by dansxmods
... used the change color pause to change the filament when i got to 6.2 mm or the 31st layer if you are printing 0.2mm layer height
grabcad
free
G0704 x axis limit switch stop
...of the table using the original m6x1 hole. it provides a threaded hole for a bolt so you can use it to trigger proximity switches
thingiverse
free
Shapeoko Z Axis Limit Switch Parts by BenHarper
...metimes not trigger after some time when the trigger arm begins to bow - so much safer to bend it out so that will never happen!!
thingiverse
free
OpenX Logo Base Version
...ogo base version
thingiverse
printed on my prusa mini, with a filament change.
0.2mm layer heights, standard prusaslicer profile
thingiverse
free
Triggered Millennials patch
...the filament color. the model was designed so that each color has 3 layers, so i added the pauses before starting layers 4 and 7.
thingiverse
free
AnyCubic Kossel E-Stop Button by hjavaher
...on by hjavaher
thingiverse
first thing i designed and printed for my anycubic kossel.
i printed this at 0.2mm layer height (pla)
thingiverse
free
Belgium Flag in Shape of Map by MattInDetroit
...o red at layer 26.
200% scale on z-axis. height is 2.6mm
start with black
change to yellow at layer 9.
change to red at layer 17.
thingiverse
free
Thingamajig by jwdiana
... openscad and look in the holes so i decided to print it. the large cube is 80x15x80.
i printed in petg but any filament will do.
thingiverse
free
H20 X5 Bracket by grantgibson45
...d to make a holder for my x5 h2o steam mop. it was printed as a 0.2mm layer height using ngen filament. 60% infill on an anet a8
thingiverse
free
Australia Flag in Shape of Map by MattInDetroit
... to red at layer 26.
200% scale on z-axis. height is 2.6mm
start with blue
change to white at layer 9.
change to red at layer 17.
Gts10Xc
thingiverse
free
Pipeadapter GTS10XC
... gts10xc
thingiverse
this is my design for a adapter to hook up a 55mm pipe to the gts10xc.
i glued it to the pipe for security.
thingiverse
free
C35-GTS10XC Adapter by BauPlanAnleitung
...it ideamaker erstellt worden.
an diesen adapter für die kreissäge geht auch der orginal bosch-saugschlauch mit dem anschluß c35.
thingiverse
free
Bosch GTS10XC Adapter 56mm to 50 DN by MeisterHoppel
...bosch gts10xc adapter 56mm to 50 dn by meisterhoppel
thingiverse
vaccum adapter 56mm to 50mm
thingiverse
free
Staubschutzblende für Bosch GTS10XC (Dust cover) by sunnewliner
...er) by sunnewliner
thingiverse
closes the gap in the saw with a 90 degree saw cut. so hardly any dust falls next to the machine.
thingiverse
free
osVAC M32 Bosch GTS10XC Adapter by loddaman
...au in den anschluss der bosch gts10xc mit 57 mm innendurchmesser passen. bei der neueren maschinen (die ich habe) passt es genau.
thingiverse
free
Yet another dust stop for the GTS10XC by mageb
...so the parts should be printable on most printers out there.
happy printing! - and then please post a make! thank you very much!
thingiverse
free
GTS10XC depth gauge by mageb
...hole in the plastic inside the machine - look at the photos.
happy printing! - and then please post a make! thank you very much!
thingiverse
free
Zero Clearance Insert for Bosch GTS 10 XC Table Saw by Marco64
...this is a zero clearance insert for the bosch gts10xc table saw. the model has already an opening for...
thingiverse
free
Niederhalter / Andrückvorrichtung für Bosch GTS10 (Hold-down Tool) by h-town
...(hold-down tool) by h-town thingiverse niederhalter für die bosch gts10xc kleine leisten oder lange bretter können sich beim sägen...
Mageb
thingiverse
free
Hourglass by mageb
...rovided for download on the project page).
if you like the design then please do me a favor and post a make! thank you very much!
thingiverse
free
Slide-in Label Holder by mageb
...int settings etc. please refer my project page at prusaprinters: https://www.prusaprinters.org/prints/63951-slide-in-label-holder
thingiverse
free
Strap Clamp Corners by mageb
...nters.org/prints/65868-strap-clamp-corners
if you like the design then please do me a favor and post a make! thank you very much!
thingiverse
free
Modular Plant Tagging System by mageb
...efer my project page at prusaprinters: https://www.prusaprinters.org/prints/62792-modular-tagging-system-for-plants-boxes-drawers
thingiverse
free
Colorful Wind Wheel by mageb
...ect page at prusaprinters: https://www.prusaprinters.org/prints/63019-colorful-wind-wheel
happy printing! and please post a make!
thingiverse
free
G2" to G1" adapter with mounting eye by mageb
...ter. it features a mounting eye for attaching a float gauge.
happy printing! - and then please post a make! thank you very much!
thingiverse
free
Wall Holder for the Bosch GEX150 Turbo by mageb
...wall (i did use 4 pcs 4mm x 40mm and 2 pcs 4.0mm x 60mm screws).
if you like the design, please post a make! thank you very much!
thingiverse
free
The Tooth of Time by mageb
...https://www.thingiverse.com/thing:1485531.
if you like the design then please do me a favor and post a make! thank you very much!
thingiverse
free
Weekclock with planetary gear (modded version) by mageb
...rovided for download on the project page).
if you like the design then please do me a favor and post a make! thank you very much!
thingiverse
free
Transparent Window Printing: PETG-/PVB-Composite (Proof of Concept) by mageb
... project page at prusaprinters.org: https://www.prusaprinters.org/prints/69331-transparent-window-printing-petg-pvb-composite-pro
Button
archibase_planet
free
Buttons
...buttons
archibase planet
lift elevator call buttons
elevator call buttons - 3d model for interior 3d visualization.
3ddd
$1
Button
... button , john reeves
набор мебели button от дизайнера john reeves
3d_export
$5
Button
...button
3dexport
smd button<br>verts 2.180<br>faces 3.848
turbosquid
$4
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1297941)
turbosquid
$1
Button
...
turbosquid
royalty free 3d model button for download as fbx on turbosquid: 3d models for games, architecture, videos. (1392935)
turbosquid
$9
buttons
...id
royalty free 3d model buttons for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1404875)
turbosquid
$6
button
...uid
royalty free 3d model button for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1669204)
turbosquid
$5
Button
...uid
royalty free 3d model button for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710868)
turbosquid
$3
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1510524)
turbosquid
$3
Button
...quid
royalty free 3d model button for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1509961)
Improved
cg_studio
$49
Robot Z300 (improved version)3d model
...o
.3ds .fbx .max .obj - robot z300 (improved version) 3d model, royalty free license available, instant download after purchase.
3d_export
$39
Robot Z300 improved version 3D Model
...fantasy sci-fi robots bot humanoid droid sci fi materials character
robot z300 improved version 3d model alekrazum 55067 3dexport
3d_export
$75
CV-90 Improved
...nnon. export versions are fitted with hägglunds e-series turrets, armed with either a 30 mm mk44 or a 35 mm bushmaster autocannon
turbosquid
$55
(Important textures coming back soon after improvements)Cuboid gazebo bench area
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
COMPLETE AUDI 80-100 SHIFT LEVER REPAIR KIT WITH IMPROVED BUSHING
...dexport
• sleeve - 1 pc. • elastic band - 1 pc. • hinge - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$7
REPAIR KIT FOR GEARSHIFT LEVER AUDI 80-100 IMPROVED
...ar of the gum is excluded. - rusk - 1 pc. - elastic band - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$30
cup mask machine front section stereo mask manufacturing machine improved version
...ing rack cad outsourcing list. the drawings are mature drawings that have been produced.<br>drawing version solidworks 2018
3d_export
free
oven - forno
...oven - forno
3dexport
gradually i'm trying to improve my 3d.
3d_export
$75
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958
3d_export
$5
civil registration authorities
...civil registration authorities
3dexport
city wedding square. the model can be used for projects, to improve the project, etc.
Stop
turbosquid
$5
Stop Stop
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
stop
...stop
3dexport
classic stop.
3d_ocean
$12
Bus Stop
...bus stop
3docean
bus bus stop station
bus stop model
archibase_planet
free
Bus stop
...bus stop
archibase planet
bus stop bus-stop
bus stop n150111 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$10
stop valve
...stop valve
3dexport
stop valve
archibase_planet
free
Bus stop
...bus stop
archibase planet
bus stop bus-stop bus station
bus stop n070512 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Bus stop
...bus stop
archibase planet
bus stop bus-stop bus station
bus stop n181213 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Bus stop
...bus stop
archibase planet
bus stop bus-stop bus station
bus stop n120514 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$1
stop
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$9
Stopping Place
...in zip pack the following items: 3d file stopping plac pack/.max/.obj// material and textures. well we hope you enjoy it regards.
Start
3d_export
$100
start race motocross
...start race motocross
3dexport
start race motocross
turbosquid
$50
The starting post
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
Starting Block
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
car start
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$2
Two Start Buttons
...cording for easy navigation – modeled from an image file can be used for different matters - great to start presantations in a...
turbosquid
$10
Kitchen Start Time
...
royalty free 3d model kitchen start time for download as max on turbosquid: 3d models for games, architecture, videos. (1502055)
turbosquid
$35
Start Finish CheckPoint
...tart finish checkpoint for download as max, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1652558)
turbosquid
$41
Stairs Post Starting
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$79
The starting post "Leon"
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$80
Horses start-cages3d model
...del
cgstudio
.3ds .c4d .dxf .obj - horses start-cages 3d model, royalty free license available, instant download after purchase.