HTC Vive Quick Swap Wall Mount for Base Station / Lighthouse by GodlikeOne

Last crawled date: 3 years, 4 months ago

After looking at other designs for quick swap mounts for the Vive's lighthouses, I wanted to improve in areas I found lacking. My design features a french cleat style bracket to hold the plate attached to the lighthouse, which can be swapped out with a blank plate when not in use to keep the wall mount looking tidy and inconspicuous.
No supports need to be added in slicing, as I have modeled circular supports for the screw holes in the Vive mounting plate, which can simply be pulled out with some pliers once printing is finished.
You will need 4x M5x8mm pan screws, and 4x M5 nuts to attach the Vive's own mounting hardware to the plates, and you can either use countersunk wood screws to secure the wall plate to the wall, or use 2x large 3M command strips if you don't want to damage the wall.