Thingiverse
Grid for Allit Europlus assorment boxes by modr007
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a grid to glue into a drawer to prevent the Allit Europlus boxes from sliding around.
you may chose to scale/reduce the height to 75% for faster pinting. It would be still about enough to prvnt sliding.
Boxes are aligned to a 54x54mm pattern. The grids are multiples of 54mm i.e. 3x3, 3x2, 3x1 and 2x1 in order to make use of all th space in your drawers.
3x3 Grid can be printed on any print area >170x170mm
I've also added 3mf files for your convenince.
Note: Some providers of these boxes may have missplaced the retainment features / corners underneath the boxes further inwards (opposed to the 5mm offset from the outer edge) which may cause a bit mor loose fit, but the boxes will still be held in place.
you may chose to scale/reduce the height to 75% for faster pinting. It would be still about enough to prvnt sliding.
Boxes are aligned to a 54x54mm pattern. The grids are multiples of 54mm i.e. 3x3, 3x2, 3x1 and 2x1 in order to make use of all th space in your drawers.
3x3 Grid can be printed on any print area >170x170mm
I've also added 3mf files for your convenince.
Note: Some providers of these boxes may have missplaced the retainment features / corners underneath the boxes further inwards (opposed to the 5mm offset from the outer edge) which may cause a bit mor loose fit, but the boxes will still be held in place.
Similar models
grabcad
free
Allit Europlus Flex 37 Rack
... allit europlus flex 37 assortment boxes.
model of the assortment box here: https://grabcad.com/library/allit-europlus-flex-45-1
thingiverse
free
Allit® EuroPlus container with labelholder by Sofaman01
...giverse
allit® europlus container with labelholder (20mm/30mmx6.5mm)
write in the comments and post a make.
thank you and enjoy!
grabcad
free
Allit Europlus Flex 37
... to build later a rack for it, or to print custom inlay boxes.
https://www.allit.de/fileadmin/allit_ag/pdf/slo_europlus_flex.pdf
thingiverse
free
Allit EuroPlus Flex 37-15 organizer boxes by juh
...8,5 mm
48,5 x 66,5 mm
note: if you are looking to replace the actual boxes, have a look at allit europlus flex insert by noloxs.
thingiverse
free
Allit Europlus Flex Insert by Noloxs
...stances render the cases as if they are closed. please notice that this only happens in the rendering and not in the final print.
thingiverse
free
organizer for Allit EuroPlus Basic 29/15 and 29/9 by laurent_despeyroux
...te the "ez" suffixed files have a bottom that permit (at least to me) to remove more easily the piece from the support.
thingiverse
free
Sortiereinsätze für Allit EuroPlus Basic "S" 29/5 by Climber4711
...t;s" 29/5, hiermit können in einem bestehenden fach 2 bzw 4 unterteilungen vorgenommen werden. es passen immer 2 in ein fach
thingiverse
free
Sortimentkasten Wandhalter | assortment box wall holder by lal12
...the boxes are, but they seem to be quite similar to some better known ones "allit...
thingiverse
free
Triangular Allit Europlus Flex Insert by oscarvdv
...ular bins i use 2 feet, one of which is cut through using cutting pliers.
i printed the bins spiralizing using 0.8 mm wide lines.
thingiverse
free
organizer for Allit EuroPlus Basic 18/7 by laurent_despeyroux
...te the "ez" suffixed files have a bottom that permit (at least to me) to remove more easily the piece from the support.
Europlus
3d_export
$5
grohe europlus mixer
...model does not include any backgrounds or scenes used in preview images.<br>---> the model does not require any textures
3d_export
$10
collection of faucets grohe
...is optimal up to a 4k render.<br>*********************************<br>collection includes:<br>concetto<br>costa<br>essence new<br>eurocube<br>eurodisc cosmopolitan<br>eurodisc<br>europluslt;br>eurosmart cosmopolitan<br>eurosmart new<br>eurostyle cosmopolitan<br>k4<br>zedra<br>*********************************<br>features:<br>- high quality polygonal model, correctly scaled...
3d_sky
free
Grohe / Europlus
...rticle.php?part=view&action;=product&product;=33547g199&article;=33547002&selector;&fragment;=28508
thingiverse
free
Allit® EuroPlus container with labelholder by Sofaman01
...giverse
allit® europlus container with labelholder (20mm/30mmx6.5mm)
write in the comments and post a make.
thank you and enjoy!
thingiverse
free
Allit Europlus Flex Insert by Noloxs
...stances render the cases as if they are closed. please notice that this only happens in the rendering and not in the final print.
thingiverse
free
Sortierkästchen für EuroPlus Sortimentskästen by Magnetix
...wischen die scharniere. das teil verhindert, dass die scharniere abbrechen, wenn ich die box ins regal stelle und dabei anstosse.
thingiverse
free
Sortiereinsätze für Allit EuroPlus Basic "S" 29/5 by Climber4711
...t;s" 29/5, hiermit können in einem bestehenden fach 2 bzw 4 unterteilungen vorgenommen werden. es passen immer 2 in ein fach
thingiverse
free
Triangular Allit Europlus Flex Insert by oscarvdv
...ular bins i use 2 feet, one of which is cut through using cutting pliers.
i printed the bins spiralizing using 0.8 mm wide lines.
thingiverse
free
Parametric Allit Europlus Flex Insert by fblumenberg
...l thickness. it is set now to 0.8mm which means, two perimeters with a 0.4mm nozzle
added the stl files for the most common sizes
thingiverse
free
organizer for Allit EuroPlus Basic 29/15 and 29/9 by laurent_despeyroux
...te the "ez" suffixed files have a bottom that permit (at least to me) to remove more easily the piece from the support.
Allit
thingiverse
free
Allit ProfiPlus Caliper by PacGyver
...allit profiplus caliper by pacgyver
thingiverse
für die allit werkzeugwand profiplus endless
thingiverse
free
Allit inter by Tolimad
...e les ai donc créé ;-)
here is an "interlayer" for "allit" storage boxes.
i missed two, so i created them ;-)
thingiverse
free
Allit® EuroPlus container with labelholder by Sofaman01
...giverse
allit® europlus container with labelholder (20mm/30mmx6.5mm)
write in the comments and post a make.
thank you and enjoy!
thingiverse
free
Allit Support tounevis / Screwdrivers holder by CherHubert
...s matériels.
screwdrivers holders suitable for allit storage systems.
parts are designed to be printed without material supports.
thingiverse
free
Allit support pinces / Pliers Holder by CherHubert
...pports matériels.
pliers holders suitables for allit storage systems.
parts are designed to be printed without material supports.
thingiverse
free
Allit Support ecocup/ Ecocup holder by CherHubert
...age systems.
perfect to neatly store pencils, markers and brushes.
this part is designed to be printed without material supports.
thingiverse
free
Screwdriver holder for Allit pegboard
...nded up in bent plastic garbage. all tools constantly fell on the ground.
but these mounts are working pretty well for years now.
thingiverse
free
Allit Profiplus Hook by Cedric_Impkvn
...r 3 with pla. infill should be about 50-70% for stabilty. also print it with support.
temperature about 200-210°c (i use ecopla).
thingiverse
free
Inserts for ALLIT Euro 47 Basic Plus by Uwe94
...lit euro 47 basic plus by uwe94
thingiverse
inserts for allit euro 47 basic plus.
battery holder 14 x aa size and 20 x aaa size.
thingiverse
free
Allit StorePlus // Pegboard universal Holder by samella
...readed rod to your desired length and attach it to the holder. the nut is optional but recommended for higher loads.
...enjoy!
Grid
archibase_planet
free
Grid
...grid
archibase planet
grid grating grate
grid n050907 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Grid
...grid
archibase planet
grid netting guard
grid n270214 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
Grid
...grid
archibase planet
grid grating grate
grid modular n020114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Grid
...grid
archibase planet
grating grate lattic
grid n080311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$10
grid
...oyalty free 3d model grid for download as blend, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1701808)
turbosquid
$9
Grid
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Bust manwoman grid
...bust manwoman grid
3dexport
bust manwoman grid
3d_export
$5
Manwoman join grid
...manwoman join grid
3dexport
man_woman join grid
3d_export
$5
Middle finger grid
...middle finger grid
3dexport
middle finger grid
3d_export
$5
Head mickey grid
...head mickey grid
3dexport
head mickey grid
Boxes
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.