Thingiverse
GepRC Leopard (LX4 LX5 LX6 LSX) Racing Pod by FerociousDesigns
by Thingiverse
Last crawled date: 3 years, 1 month ago
I am releasing this on the condition that it is only printed for personal use. Anyone found selling these will be reported to the platform they are found selling them on for breach of licence agreement, and will affect my decisions when it comes to releasing things in future.
Here is a racing pod I have designed for the GepRC leopard.
It is designed to fit the Runcam Swift style of camera. I am using it with the Rotor Riot version of the original Runcam Swift.
You will need:
2 x M3x20mm Cap head bolts for mounting the pod to the rear of the frame
2 x M3 Nyloc nuts to bolt those into
2 x M3 Standard Nuts to push into the nut traps in the inside of the front of the pod.
I used the standard screws to mount the camera to the pod. Long ones went in the plastic holes, short in the brass threaded ones.
I am using a Matek VTX pigtail which does not have the lugs on the side of the SMA connector like the TBS does. I am not sure if you can mount a TBS SMA connector to the pod.
I have my receiver antenna's mounted under the arms as you can see. If you don't want to do that you could always use cable ties and mount them to the hexagons on the rear of the pod somehow.
I printed it from Surreal TPU at 0.2mm layer height and 25% cubic infill using supports with 75% support interface and a roof. I blocked supports being made in the camera bolt holes and also above the nut traps at the front of the pod as they would have been difficult to remove.
Enjoy :)
Here is a racing pod I have designed for the GepRC leopard.
It is designed to fit the Runcam Swift style of camera. I am using it with the Rotor Riot version of the original Runcam Swift.
You will need:
2 x M3x20mm Cap head bolts for mounting the pod to the rear of the frame
2 x M3 Nyloc nuts to bolt those into
2 x M3 Standard Nuts to push into the nut traps in the inside of the front of the pod.
I used the standard screws to mount the camera to the pod. Long ones went in the plastic holes, short in the brass threaded ones.
I am using a Matek VTX pigtail which does not have the lugs on the side of the SMA connector like the TBS does. I am not sure if you can mount a TBS SMA connector to the pod.
I have my receiver antenna's mounted under the arms as you can see. If you don't want to do that you could always use cable ties and mount them to the hexagons on the rear of the pod somehow.
I printed it from Surreal TPU at 0.2mm layer height and 25% cubic infill using supports with 75% support interface and a roof. I blocked supports being made in the camera bolt holes and also above the nut traps at the front of the pod as they would have been difficult to remove.
Enjoy :)
Similar models
thingiverse
free
Runcam Micro Swift Camera Mount by jperrigo
...ith an m3 bolt/nut. you can use the side screws to hold the runcam into the mount, or skip those and just use a little hot glue.
thingiverse
free
Geprc mark4 runcam micro swift 3 camera mount by Ouzzfpv
...rk4 runcam micro swift 3 camera mount by ouzzfpv
thingiverse
geprc mark4 runcam micro swift 3 camera mount. can adjust the angle
thingiverse
free
Strix Stratosurfer canopy by tfmccull
...stratosurfer w/ interior mount for an hs1177/runcam swift or similar camera. bolts to existing canopy base with m3 hardware....
thingiverse
free
Eachine Racer Parts (Runcam 2 mount, Runcam Swift 2 Mount, Antenna mount for TBS Unify race) by majorrom
...r for an antenna (tested with tbs unify pro hv race edition). used ninjaflex for the runcam 2 holder and abs for everything else.
thingiverse
free
Runcam Split/Swift Mini to Swift Camera Adaptor Mounting Bracket - GoPro Lens by kmmarlow
...t of my armattan japalura.
you will need:
2 x m3 nuts
4 x m2 nuts
plus m3 and m2 bolts (length depends on your frame thickness)
thingiverse
free
FPV Flightclub Tokio X Runcam Swift 2 Mount by Alib10
...nt to keep camera inside pod for protection, but not too far back that you can see the edge of the pod with the runcam 2.1mm lens
thingiverse
free
Geprc KX 5 Upgrades by baboon99
...na hole is for dipole type straight from vtx.
added a sma version to.
printed the skids and xt60 in petg
tpu for the runcam mount
thingiverse
free
GepRC 5" Chimp pod by destos
...frame.https://www.mcmaster.com/#press-fit-nuts/=1a4puhv
print with tpu
cut out slots and holes as needed for equipment and wires.
thingiverse
free
Runcam mount for GEPRC Leopard by stefl
...runcam mount for geprc leopard by stefl
thingiverse
this a remix of a run cam mount.
use with run cam on geprc leopard.
thingiverse
free
Runcam Split/Swift Mini to Swift Camera Adaptor Mounting Bracket - Standard Lens by kmmarlow
...ont of my armattan japalura.
you will need:
2 x m3 nuts
4 x m2 nuts
plus m3 and m2 bolts (length depends on your frame thickness)
Lx6
humster3d
$75
3D model of Holden Adventra LX6 (VZ) 2005
...d model of holden adventra lx6 (vz) 2005 in various file formats. all our 3d models were created maximally close to the original.
thingiverse
free
GEPRC GEP-LX5 Leopard GoPro Session AND Runcam 3 mount (Works with LX4 LX6 LXS) by joem_
...ut, or whatever.
edit: added one for the runcam 3 as well!
designed with fusion360, source can be found at http://a360.co/2qi6ttr
thingiverse
free
GepRC Leopard LX/LSX VTx antenna plate (Modified from Original) by RotorGator
...antenna plate for lx and lsx models (lx4, lx5, lx6 and lsx4, lsx5, lsx6). since most plastics printed will...
thingiverse
free
Geprc Leopard Dji Hd Canopy
...probably be replaced with usual nuts. fits lx4 lx5 lx6 ls4 ls5 ls6. tested with pla and...
thingiverse
free
Toyota Cressida MX63 Door Lock Button Bezel
...japan 09/1980-06/1984 toyota chaser gx6,lx6,mx61,rx6,sx60,tx60 japan 03/1980-06/1984 toyota cresta gx5,61,lx6,mx51,61,sx60,tx50 this should work for the following part numbers (the...
thingiverse
free
GEPRC GEP LSX LX TBS Unify Pro VTX Antenna Holder by SnappyFPV
...vtx. fits for these frames: lx4 https://www.gearbest.com/brushless-fpv-racer/pp_626362.html?lkid=11419735 lx5 https://www.gearbest.com/brushless-fpv-racer/pp_626361.html?lkid=11419735 lx6 https://www.gearbest.com/racing-frame/pp_626365.html?lkid=11419735 lsx5 https://www.gearbest.com/brushless-fpv-racer/pp_639708.html?lkid=11419735 these tbs unify vtx: tbs unify...
thingiverse
free
GEPRC LX5 LSX5 Leopard FPV Camera and GoPro Session 5 Protector by jeoje
...gopro session and runcam 3 mount (works with lx4 lx6 lxs) by joem_ geprc lx5 "leopard" fpv camera protector/mount...
grabcad
free
ESP-32
...esp-32 grabcad esp-32 modulo wifi, bluetooth daual, procesador xtensa lx6 de doble...
grabcad
free
WT32-SC01
...capacitive multi-touch lcd screen|built-in bluetooth wifi|gui firmware|dual-core xtensa 32-bit lx6 mcu|4mb spi flash 8mb...
Lx4
3d_export
$35
Bookshelf Speaker M-Audio Stereophile LX4 3D Model
...ave
bookshelf speaker m-audio stereophile lx4 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl lully 102711 3dexport
thingiverse
free
GEPRC LX4 to 5" props - canopy - pod by nik101968
...c lx4 to 5" props - canopy - pod by nik101968
thingiverse
geprc lx4 canopy, trasforms 4 inches to 5 inches propellers frame
thingiverse
free
GEPRC GEP-LX5 Leopard GoPro Session AND Runcam 3 mount (Works with LX4 LX6 LXS) by joem_
...ut, or whatever.
edit: added one for the runcam 3 as well!
designed with fusion360, source can be found at http://a360.co/2qi6ttr
thingiverse
free
GEPRC_LX5 GPS mount for beitian BN-220 by spaners
...gps mount for beitian bn-220 by spaners thingiverse geprc lx45/6 gps mount designed to fit beitian bn-220 gps module...
thingiverse
free
GEP-LX5 Vertical antena mount for crossfire mortal T antenna by spaners
...antenna by spaners thingiverse vertical antenna mount for geprc lx45/6 quadcopter the antenna cable passes down through the centre...
thingiverse
free
GepRC Leopard LX/LSX VTx antenna plate (Modified from Original) by RotorGator
...replacement vtx antenna plate for lx and lsx models (lx4 lx5, lx6 and lsx4, lsx5, lsx6). since most plastics...
thingiverse
free
Geprc Leopard Dji Hd Canopy
...rear, can probably be replaced with usual nuts. fits lx4 lx5 lx6 ls4 ls5 ls6. tested with pla and...
thingiverse
free
GEPRC GEP LSX LX TBS Unify Pro VTX Antenna Holder by SnappyFPV
...and connect again to vtx. fits for these frames: lx4 https://www.gearbest.com/brushless-fpv-racer/pp_626362.html?lkid=11419735 lx5 https://www.gearbest.com/brushless-fpv-racer/pp_626361.html?lkid=11419735 lx6 https://www.gearbest.com/racing-frame/pp_626365.html?lkid=11419735 lsx5 https://www.gearbest.com/brushless-fpv-racer/pp_639708.html?lkid=11419735 these tbs...
thingiverse
free
GEPRC LX5 LSX5 Leopard FPV Camera and GoPro Session 5 Protector by jeoje
...leopard gopro session and runcam 3 mount (works with lx4 lx6 lxs) by joem_ geprc lx5 "leopard" fpv camera...
Lx5
thingiverse
free
GEPRC LX5 Camplate by Tomakk
...iverse
hello :-)
here is my camholderplate for the geprc lx5 leopard.
i`ve mirror this stl to get the other side ;-)
greetz
;-)
thingiverse
free
GEP-LX5 VTX Holder by Ltfiend
... lx5. this unit mounts by clipping into the two slots on the aluminum part of the frame (no screws needed).
designed in freecad.
thingiverse
free
TOP COVER GEPRC LX5 "LEOPARD" by Arivola
... "leopard" by arivola
thingiverse
top cover for geprc lx5 with hole antenna
you are the 123dx file for change.
thanks.
thingiverse
free
GEP-LX5 Buzzer Holder by Ltfiend
...on a gep-lx5 frame.
this will raise the canopy up 2mm. i use a capacitor holder on the front of the quad to lift the front 2mm.
thingiverse
free
GEPRC LX5 Armprotector by Tomakk
... from "jeoje". thanks for your inspiration!!! :d
i`ve would construct it self, but a little bit different.
greetz
;-)
thingiverse
free
GEP LX5 by Wthompson87
...e with 4 arms but 2 where mirror images of other so i made left and right guards left fits arm 4 and 1 and right fits arm 3 and 2
thingiverse
free
FrSky XM+ antenna mount for GEPRC LX5 by kykwong
...he receiver can be directly inserted into the flexible mount, and the mount can be installed on the lx5 without using any screws.
thingiverse
free
GEP-LX5 ESC Cable Clip by Ltfiend
...he cables from the motor to the esc need to be secured. the grooves for the wires are oversized to support soldered connections.
thingiverse
free
ImmersionRC Tramp VTX mount for GEPRC LX5 Leopard 220mm frame by jszewczyk
... mount for geprc lx5 leopard 220mm frame by jszewczyk
thingiverse
immersionrc tramp vtx mount for geprc lx5 leopard 220mm frame.
thingiverse
free
GepRc LX5 Arm Protector by Karl33to
...ferent, so just flip them over to suit.
print in flexible filament, with supports, and attach them to the arm with a bit of glue.
Ferociousdesigns
thingiverse
free
Bong mouthpiece by FerociousDesigns
...bong mouthpiece by ferociousdesigns
thingiverse
it is what it is, i printed it with tpu. fits on an acrylic water pipe :)
thingiverse
free
KTM Keyring by FerociousDesigns
...tm keyring by ferociousdesigns
thingiverse
it is what it is, i will be printing from tpu personally but use whatever you want :)
thingiverse
free
'Shaguar' Keyring by FerociousDesigns
...;shaguar' keyring by ferociousdesigns
thingiverse
it is what it is, i will be printing from tpu but use whatever you want :)
thingiverse
free
Ford RS Keyring by FerociousDesigns
...ford rs keyring by ferociousdesigns
thingiverse
it is what it is, i will be printing from tpu but use whatever you want :)
thingiverse
free
Tiger Racing Keyring by FerociousDesigns
...tiger racing keyring by ferociousdesigns
thingiverse
it is what it is, i will be printing from tpu but use whatever you want :)
thingiverse
free
BL Touch Mockup by FerociousDesigns
... ferociousdesigns
thingiverse
a model for use in making brackets and holders. obviously is not functional!
added fusion 360 file
thingiverse
free
3 Colour Mixing 'Diamond' Hotend Mockup by FerociousDesigns
...#39; hotend mockup by ferociousdesigns
thingiverse
this is wip!
i still need to confirm the cold ends are at the correct angles.
thingiverse
free
BoltRC Kraken Pod - Remix by FerociousDesigns
...he original design.
someone asked me to modify it to allow a bit less camera angle. all i have done is elongated the camera hole.
thingiverse
free
Lumenier Pagoda 2 - Short Version - Mockup by FerociousDesigns
...ousdesigns
thingiverse
created this to help with designing pods for quadcopters.
fusion 360 file included to use in your models.
thingiverse
free
Greek Alphabet - Lowercase by FerociousDesigns
...ts already on thingiverse but none suited what they wanted.
maybe someone else would find them useful, so i have uploaded here :)
Lsx
3ddd
$1
Lussole LSX / Maggiolata
... lussole lsx
торшер - 1350х450 ~ 10000руб.лампа - 520х320 ~ 5000руб.бра - 480х240 ~ 5000руб.тип лампочки g4 w20
3ddd
$1
Lussole LSX-5203-05
....
the diameter (width) 460 mm.
quantity and power of lamps: 6x40w e14
color: gold / white / black
material: metal, glass, plastic
turbosquid
$300
LSX-LS7 Carburetor intake manifold
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$19
Chevrolet LSX V12 Engine
...design see my other works subscribe to my account, like the model, write me a message insta (@av__live) or e-mail: i@goldfing.ru
3ddd
$1
Подвес Lussole Sasso LSX-3506-01
...вет плафонов: хром
материал плафона: металл
цвет основания: никель, хром
материал основания: металл
в архиве файл для 3dmax 2011
3ddd
$1
Люстра Lussole Sasso LSX-3506-07
...вет плафонов: хром
материал плафона: металл
цвет основания: никель, хром
материал основания: металл
в архиве файл для 3dmax 2011
archive3d
free
Lamp 3D Model
...lamp 3d model archive3d lamp luminaire light lamp lsx0516-01 n291107 - 3d model (*.gsm+*.3ds) for interior 3d...
thingiverse
free
LSx Snowflake by Ayca01
...lsx snowflake by ayca01
thingiverse
lsx snowflake designed by adam kosel.
3dfindit
free
LSX Series
...lsx series
3dfind.it
catalog: zimmer group
3dfindit
free
LSX Series
...lsx series
3dfind.it
catalog: zimmer group
Geprc
thingiverse
free
geprc mark3
...geprc mark3
thingiverse
.
thingiverse
free
GepRC GoPro mount
...geprc gopro mount
thingiverse
gopro mount for a geprc mk2 / mark2 mk ii
thingiverse
free
Geprc mark4 protection by scratch83
...geprc mark4 protection by scratch83
thingiverse
geprc mark4 protection
thingiverse
free
GepRc Cygnet 3 Upgrades
...geprc cygnet 3 upgrades
thingiverse
upgrades for geprc cygnet 3
thingiverse
free
Geprc Chimp back
...geprc chimp back
thingiverse
back for geprc chimp. probably you should slightly cut corners to avoid props damage.
thingiverse
free
Geprc Cygnet 2
...izable with sketches.
!!! model is not for 3d printing, but for modeling additional stuff. !!!
!!! not optimized for printing !!!
thingiverse
free
Box GepRc CinePro 4K
...box geprc cinepro 4k
thingiverse
caja para el geprc cinepro 4k, usando bolsa de eachine
thingiverse
free
Geprc MARK4 frame kit by AlexAlle
...geprc mark4 frame kit by alexalle
thingiverse
geprc mark4 frame kit
thingiverse
free
Geprc mark4 grass protection by Bati4eli
...geprc mark4 grass protection by bati4eli
thingiverse
geprc mark4 grass protection
thingiverse
free
Geprc Chimp camera mount by 116aavl
...geprc chimp camera mount by 116aavl
thingiverse
geprc chimp camera mount
Leopard
3d_export
free
leopard
...leopard
3dexport
leopard 3d 3dmodel free collection pack animal wildlife fbx
turbosquid
$99
Leopard
...
turbosquid
royalty free 3d model leopard for download as ma on turbosquid: 3d models for games, architecture, videos. (1417530)
turbosquid
$40
Leopard
...yalty free 3d model leopard for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1307378)
3d_export
free
Leopard 2a4
...leopard 2a4
3dexport
german leopard 2a4 low-poly
turbosquid
$200
Leopard
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$180
leopard
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$45
Leopard
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
Leopard
...d model leopard for download as 3ds, fbx, blend, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1329935)
3d_export
$12
leopard
...leopard
3dexport
leopald for 3d printing toy
3ddd
free
Leopard
...leopard
3ddd
леопард
3d модель леопарда
Pod
design_connected
$13
Pod
...pod
designconnected
niche modern pod computer generated 3d model. designed by pyles, jeremy.
3d_export
$5
engine pod
...engine pod
3dexport
engine pod
turbosquid
$80
POD
...pod
turbosquid
royalty free 3d model pod for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1234976)
3ddd
$1
Pod 325
...pod 325
3ddd
пуф
pod 325
turbosquid
$4
PODS
...oyalty free 3d model pods for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1563118)
3d_export
$5
coworking pods
...coworking pods
3dexport
private pods for workspaces, offices
3ddd
$1
Pod Meeting
...pod meeting
3ddd
pod meeting , martela
146cm x 205cm
design_connected
$16
Pod 325
...pod 325
designconnected
department pod 325 computer generated 3d model.
3d_ocean
$5
Ariel Power Pod
...model ariel power pod ariel power pod, modeled in cinema 4d r14 and all materials are included. if you like it, please rate this
3ddd
$1
POD 325
...pod 325
3ddd
кресло мешок
кресло мешок pod 325, room 21 85x50x100cm.
Racing
3ddd
$1
race
...race
3ddd
мотоцикл
race
3d_export
$5
racing car
...racing car
3dexport
racing car
turbosquid
$15
Racing
...d
royalty free 3d model racing for download as obj and blend on turbosquid: 3d models for games, architecture, videos. (1474846)
3d_export
$5
racing helmet
...racing helmet
3dexport
helmet 3d model for motocross or racing cars
3d_export
$5
racing car
...racing car
3dexport
low poly classical racing car model
3d_ocean
$29
racing car
...cing car rim seat speed sport sport car tyre
detailed 3d model of racing car. all materials are included. model is ready for use.
3d_ocean
$29
racing car
... rim seat speed spoiler sport sport car tire
detailed 3d model of racing car. all materials are included. model is ready for use.
3d_ocean
$15
Race Car
...race car
3docean
a very detailed and realistic 3d model of a race car, which was created with polygons.
3ddd
$1
Turbo Racing
... машинка
игрушечная гоночная дорога "turbo racing". почувствуй себя настоящим гонщиком.
3d_export
$100
start race motocross
...start race motocross
3dexport
start race motocross