Thingiverse
Food Dehydrator Filement Adaptor Outlet Guide by darian_c
by Thingiverse
Last crawled date: 3 years, 4 months ago
The is a nice filament 'outlet' from a food dehydrator.
This allows a neat connection to a PC4-M10 fitting to connect a PTFE bowden tube.
The modifications required to the food dehydrator are:
Cut out the middle grid from 2 of the trays, so you are left with tray rings.
On one of these notch out a 25x13mm section from the top part of the ring (see photos).
Now stack as follows (top to bottom):
Lid
Tray ring - mesh cut-out
Tray ring - notched with this 3D printed adaptor installed
Tray ring - unmodified (filament spool will sit on this)
Food dehydrator base
You will have 2 trays leftover as spares :)
The food dehydrator I use:
Devanti 5 tray
Model: FD-BT5-1142-BK
Outer tray diameter: 240mm
For full step-by-step instructions, see my blog post: https://dariancabot.com/2020/11/01/diy-3d-printing-filament-dryer/
This allows a neat connection to a PC4-M10 fitting to connect a PTFE bowden tube.
The modifications required to the food dehydrator are:
Cut out the middle grid from 2 of the trays, so you are left with tray rings.
On one of these notch out a 25x13mm section from the top part of the ring (see photos).
Now stack as follows (top to bottom):
Lid
Tray ring - mesh cut-out
Tray ring - notched with this 3D printed adaptor installed
Tray ring - unmodified (filament spool will sit on this)
Food dehydrator base
You will have 2 trays leftover as spares :)
The food dehydrator I use:
Devanti 5 tray
Model: FD-BT5-1142-BK
Outer tray diameter: 240mm
For full step-by-step instructions, see my blog post: https://dariancabot.com/2020/11/01/diy-3d-printing-filament-dryer/
Similar models
thingiverse
free
food dehydrator filamentdryer mod
...ys, so you can still use it as food dehydrator.
the diameter of the dehydrator is 235mm.
rolls up to 100mm width will fit inside.
thingiverse
free
dehydrator with filament outlet by jemad871
...or with filament outlet by jemad871
thingiverse
ring for the cheap diy dehydrator to allow for 2 roles and outlet for 1 filament
thingiverse
free
universal filament roller for food dehydrator by KvanDijk
...ch it with ziptie's
add some bearing with a inner diameter of 10mm (6900zz) and you'r good to go!
prints without support!
thingiverse
free
Filament spool dehydrator mounting adaptor by J741
...operating, i used a piece of soft pvc tubing (similar to aquarium air hose), in which i cut a...
thingiverse
free
Filament dryer rings/lid for cheap food dehydrators
...siccant bags on an empty spool for drying. if you print in pla, and go much higher in temp, the pla will likely start to deform.
thingiverse
free
Geepas Food Dehydrator mod filament dryer by omarhaasan
...ite
https://www.printdry.com/how-to-dry-filaments
see the picture for how it work
comments and makes are welcome
happy arab3d ;)
thingiverse
free
Presto Dehydrator Filament Drying Adapter (06300,06301) by Papa_Oso
...ectric-dehydrator/dp/b008h2oely
and presto 06301: https://www.amazon.com/presto-dehydro-digital-electric-dehydrator/dp/b008h2oekk
thingiverse
free
Dehydrator Extension by fluffywhitewolf
...the trays.
specific dehydrator model : http://www.amazon.com/gp/product/b075zb3v9s/
diameter is 240mm. printed on an ender5plus
3dwarehouse
free
Food Dehydrator Tray
...ood dehydrator tray
3dwarehouse
this is a simple model of a food dehydrator tray used in excalibur dehydrators. #dehydrator_tray
thingiverse
free
Filament dehydrator lid handle by Wile_E_Coyote
...1385646164https://www.aliexpress.com/item/5-trays-food-dehydrator-fruit-vegetable-herb-drying-machine-food-dryer/32853692910.html
Darian
turbosquid
$10
Sideboard Darian by Luxxu
...y free 3d model sideboard darian by luxxu for download as max on turbosquid: 3d models for games, architecture, videos. (1243785)
3dbaza
$4
Maison Valentina Darian Bathtub (321317)
...ion - darian<br>type - bathtub<br>dimensions:<br>width - 1830mm<br>depth - 1000mm<br>height - 750mm
3d_sky
free
Baron
...baron 3dsky door manufacturer: darian collection: baron link to manufacturer...
3d_sky
free
Barcelona ash white orchid
...barcelona ash white orchid 3dsky door manufacturer: darian collection: barcelona link to manufacturer...
thingiverse
free
Scent-terrific Smart Candle by dbj1906
...candle. instructions to build the electronics are here -> https://www.hackster.io/darianjohnson/scent-terrific-smart-candle-system-d8c68a a few notes: i uploaded the candle holder as-is...
thingiverse
free
The Terminator (Ready for casting in bronze) by boris3dstudio
...don't care. it's the truth."[87] thematic analysis the psychoanalyst darian leader sees the terminator as an example of how...
grabcad
free
darian
...darian
grabcad
fillarment spacer
cg_trader
$3
Side table Darian II
...side table darian ii
cg trader
https://www.luxdeco.com/products/darian-ii-side-table darian side table coffee furniture brass
cg_trader
$12
Maison Valentina Darian Bathtub
...maison valentina darian bathtub
cg trader
bathtub:
collection - darian
type - bathtub
cg_trader
$12
Darian Sideboard
...darian sideboard
cg trader
materials
body: brass & wood
Filement
thingiverse
free
Filement holder 200mm by willemjan
...filement holder 200mm by willemjan
thingiverse
you can use this holder to store your filement.
thingiverse
free
Filement Holder by Patato93
...on for 2,85 or 3mm filement
the other for 1,75 mm (i could not try this one so if you can confirm that it's ok.....thank you)
thingiverse
free
UP Filement Guide by johnnyfp
... tube was jamming in the spool.
so have re created this part without the slot at the top so that the filement doesn't popout.
thingiverse
free
Filement support by capucinois
...filement support by capucinois
thingiverse
simple spool support for prusa i3
thingiverse
free
Filement guide for 15x15 kossel mini by Domterran
...filement guide for 15x15 kossel mini by domterran
thingiverse
filement guide for 15x15 kossel mini
thingiverse
free
holder filement by ambroise
...holder filement by ambroise
thingiverse
holders for 3d printer delta thank you my friend adolph
thingiverse
free
Improvement filement rotare by druchip
...improvement filement rotare by druchip
thingiverse
i just design simple for better filament holder rolling.
thingiverse
free
i3 filement bracket by dillonning
...i3 filement bracket by dillonning
thingiverse
need a shaft o/d 8 and 6 626zz ball bearing
thingiverse
free
Filement guide for original Prusa i3 MK2/S by crami
...
a filement guide for the original prusa i3 mk2s. probably also fits other prusa machines, but i only have this one to verify.
thingiverse
free
Artillery Sidewider X1 Runout Filement Sensor holder by thomroll
...he distance between the spool holder and the filament sensot on the x1. it helps to charge the filement ... let's give a try!
Dehydrator
3d_ocean
$1
Pumpkin Seeds Seamless Background
...tiling pattern • 1024×1024 pix texture • .jpg and flat .png file • tiling texture click here if you need bigger file at photodune
3d_export
$7
electric fruit dryer machine
...electric fruit dryer machine 3dexport fruit dehydrator machine 3d model:<br>dryer include fruits models that are randomly...
sketchfab
$4
Food Dehydrator
...food dehydrator
sketchfab
low poly food dehydrator - food dehydrator - buy royalty free 3d model by sunny (@sunny7610)
thingiverse
free
Dehydrator Extension by fluffywhitewolf
...the trays.
specific dehydrator model : http://www.amazon.com/gp/product/b075zb3v9s/
diameter is 240mm. printed on an ender5plus
thingiverse
free
food dehydrator filamentdryer mod
...ys, so you can still use it as food dehydrator.
the diameter of the dehydrator is 235mm.
rolls up to 100mm width will fit inside.
thingiverse
free
dehydrator with filament outlet by jemad871
...or with filament outlet by jemad871
thingiverse
ring for the cheap diy dehydrator to allow for 2 roles and outlet for 1 filament
thingiverse
free
DIY Filament Dehydrator
...n be used simultaneously to recharge desiccant packets. by printing additional collars more than two reels could be accommodated.
thingiverse
free
Dehydrator Spool Holder by mslivkoff
...he post on the bottom of the dehydrator to hold the filament spool up and allow the warm are to circulate freely around the spool
thingiverse
free
Dehydrator Filament guide and spool holder by 3dphaus
...er by 3dphaus
thingiverse
filament guide and spool holder for food dehydrator.
this is for dehydrator with diameter of 27.5 cm.
thingiverse
free
Lower Tray Westinghouse Dehydrator WFD100W by jtgraphics
...lower tray westinghouse dehydrator wfd100w by jtgraphics
thingiverse
lower tray for westinghouse dehydrator wfd100w
Adaptor
turbosquid
$15
Adaptor-2
...alty free 3d model adaptor-2model for download as dwg and ige on turbosquid: 3d models for games, architecture, videos. (1710809)
turbosquid
free
Adaptor plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male DFP adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Female VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Memory stick adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
male union tee adaptor
...ame is male union tee adaptor , it is used in home and industrial area . if you want to get yhis parts blue print buy it from me
turbosquid
$20
Male M1 Digital Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male M1 Digital & Analog Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Samsung Travel Adapter 3D Model
...samsung travel adapter 3d model 3dexport charger white travel adaptor battery charging device samsung travel adapter 3d model g.lex...
Outlet
archibase_planet
free
Outlet
...chibase planet
outlet socket wall outlet plug socket
outlet n160914 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Outlet
...outlet
archibase planet
socket wall outlet equipment
outlet 03 - 3d model for interior 3d visualization.
3d_ocean
$2
Modern Outlet
...modern outlet
3docean
glossy interior outlet modern outlet outlet white
moder outlet model c4d file and object file included.
archibase_planet
free
Outlet
...chibase planet
appliance receptacle convenience receptacle receptacle
electrical outlet - 3d model for interior 3d visualization.
turbosquid
$4
Outlet
...t
turbosquid
royalty free 3d model outlet for download as ma on turbosquid: 3d models for games, architecture, videos. (1562268)
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
turbosquid
$15
Outlet
...free 3d model outlet for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1194524)
turbosquid
$14
Outlet
...free 3d model outlet for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1194499)
turbosquid
$12
Outlet
...free 3d model outlet for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1194502)
turbosquid
$10
Outlet
...free 3d model outlet for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1194520)
Guide
turbosquid
$15
Guide drawer
...squid
royalty free 3d model guide drawer for download as dwg on turbosquid: 3d models for games, architecture, videos. (1261387)
turbosquid
$1
Road Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Guide-board 3D Model
...ion sign guide sign
guide-board n170112 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
turbosquid
$2
soap cutter guide
...
royalty free 3d model soap cutter guide for download as stl on turbosquid: 3d models for games, architecture, videos. (1694030)
turbosquid
$15
Blind Guiding tiles
...free 3d model blind guiding tiles for download as 3dm and dae on turbosquid: 3d models for games, architecture, videos. (1156598)
turbosquid
$69
Japanese Tour Guide
...d model japanese tour guide for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1614288)
turbosquid
$10
CNC Linear Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Tank Model Guide
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Road Guide 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$9
Guide Books 3
...sformed separately and each have unique texture map on front and back cover. to make your work easier this model comes in thre...
Food
archibase_planet
free
Food
...food
archibase planet
food fires fast food
food fires n180614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
food
...food
3dexport
this is a table with food.
turbosquid
$10
canteen food, fast food
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$6
Food Truck
...oly low poly food truck truck
low poly food truck for games or animation. it contains of rack, ventilation, stairs, and umbrella.
turbosquid
$3
Food
...osquid
royalty free 3d model food for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1443013)
3d_export
$5
Food container
...food container
3dexport
food container
3d_export
$5
food box
...food box
3dexport
it is box for food with a cover.
turbosquid
$5
food
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Foods
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
food
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
C
3ddd
$1
Gustavsberg Skandic 160 c-c
...gustavsberg skandic 160 c-c
3ddd
gustavsberg , смеситель
3dmax 2009
3ddd
$1
Кресло Victoria C
...кресло victoria c
3ddd
victoria c , стул
victoria c
design_connected
$25
Mobius C
...mobius c
designconnected
zenith mobius c computer generated 3d model. designed by schamburg, marc.
3ddd
$1
Molteni & C
...molteni & c
3ddd
molteni&c
molteni & c
turbosquid
$10
Raids house C&C Tiberian sun
... raids house c&c tiberian sun for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1188376)
turbosquid
$10
Civilian Asylum C&C Tiberian sun
...ilian asylum c&c tiberian sun for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1188365)
3ddd
$1
Molteni & C
...molteni & c
3ddd
molteni&c
стул molteni & c
3ddd
free
kamina&c
...kamina&c
3ddd
kamina-c , табурет барашек
sheep chair by kamina-c
design_connected
$29
Extrasoft C
...extrasoft c
designconnected
living divani extrasoft c computer generated 3d model. designed by lissoni, piero.
design_connected
$4
Mono C
...mono c
designconnected
scp mono c tables computer generated 3d model. designed by konstantin grcic.