Thingiverse
Fatshark Lipo Case for NCR18650 mod by kwaaaa
by Thingiverse
Last crawled date: 3 years, 1 month ago
From the Rotor Riot video instructional on how to turn the Panasonic NCR18650 3400mah batteries into Fatshark lipos with battery level indicator, I designed a case to go with it. It is an extremely tight fitting design and I recommend you only try this if you are great at soldering. Not for beginners, and I may design a simpler version for newbies in the future if enough requests.
What you need:
2x Panasonic NCR18650B 3400mah batteries (ebay, amazon)
2s Lipo Battery Voltage Display Indicator Board (banggood, ebay)
2S Balance plug (ebay, amazon)
5.5 x 2.1mm DC Power Male Jack right angle (ebay, amazon)
cyanoacrylic glue or 2-parts epoxy
hotglue
Tips:
You do NOT need to dremel the ends of the battery to get the wires to adhere, a simple metal file or sandpaper will do the trick to remove the oxidation layer for solder to wick.
Use thin wires for the voltage indicator board as to fit inside the casing
inject a bit of hot glue where the power lead and balance plug exits to keep it in place from being tugged on.
What you need:
2x Panasonic NCR18650B 3400mah batteries (ebay, amazon)
2s Lipo Battery Voltage Display Indicator Board (banggood, ebay)
2S Balance plug (ebay, amazon)
5.5 x 2.1mm DC Power Male Jack right angle (ebay, amazon)
cyanoacrylic glue or 2-parts epoxy
hotglue
Tips:
You do NOT need to dremel the ends of the battery to get the wires to adhere, a simple metal file or sandpaper will do the trick to remove the oxidation layer for solder to wick.
Use thin wires for the voltage indicator board as to fit inside the casing
inject a bit of hot glue where the power lead and balance plug exits to keep it in place from being tugged on.
Similar models
thingiverse
free
Fatshark Battery Case for Batteries 18650B by zlowram
... explode if they are overheated. do it quickly and do it in several times if needed allowing to complete cool down the batteries.
thingiverse
free
Fatshark 18650 Case by Sch0ckw4v3
...indicator board are able to shine through the thin walls of the case.
you need to glue the top and bottom piece to the main case.
thingiverse
free
18650 2s Case by SanguineDrone
... want a drop of glue (like ca)
assembly is straight forward and the cap should fit in snugly if your printer has good tolerances.
thingiverse
free
Slim Fatshark 21700 Case by rockcityfpv
...bottom in one piece
supports only needed if print the covers
for best looks print the covers on the bottom or stand on the edge.
thingiverse
free
FatShark Goggle 18650 Li-Ion Battery Holder Case by ta5jda
...e, but cant find it now, so if it's yours i apologise. i made some changes that for me made it a bit neater and work better!
thingiverse
free
Fat Shark NCR18650 casing by walterkort
...course i will not forget to mention the most beautifull fpv-product in the world:
fat shark dominator hd3 - https://goo.gl/0jbnad
thingiverse
free
18650 Fatshark-like Battery Case (Over-engineered) - 8.4V by boweeble
...ehttp://www.banggood.com/lipo-battery-balance-charging-extension-wire-cable-20cm-2s-3s-4s-6s-p-951866.html?p=0m281534004802015125
thingiverse
free
Fatshark 18650 Case with Charge indicator support by gustofusion
...2 18650 batterys available on ebay.
several youtube videos online to show how to make the connections including soldering.
enjoy!
thingiverse
free
18650B Fatshark Case by Drevious
...ell 18650 lithium ion battery charging voltage capacity percent level led indicator board on amazon. screws used (4x) m3 x 20mm.
thingiverse
free
Fatshark 2s 800mah battery case and clip by Modz_FPV
...p.
this is a 2 part battery case to fit a 2s 800mah lipo. it comes with a mounting clip so it doesn't slide out of the strap.
Ncr18650
thingiverse
free
Model - NCR18650 Battery by Atiesh
...y by atiesh
thingiverse
model - panasonic ncr18650 battery
dimension - 18,4mm x 65,5mm
for modelling purposes not for printing!
thingiverse
free
Fat Shark NCR18650 casing by walterkort
...course i will not forget to mention the most beautifull fpv-product in the world:
fat shark dominator hd3 - https://goo.gl/0jbnad
thingiverse
free
Fatshark - Creations by Mickkn
...lite module with extended pins 23-oct-2016 ncr18650_no_solder_v1_0_1 : solderless ncr18650 batterypack with donor battery springs and a 2s battery...
thingiverse
free
Slim 4x 18650 Case / Pack for DJI FPV Goggle
...a 4s 18650 pack as well. i mainly use ncr18650 cells for this use case since no high amperage...
thingiverse
free
Portable Acrylic edge backlit sign by glassy
...micro-usb using a phone charger. it uses the panasonic ncr18650 (unprotected) with solderable contacts. to get the original i...
Kwaaaa
thingiverse
free
Plumbus by kwaaaa
...verse
dinglebop filament is required for this print. if printed on low resolution, the final print can be smoothen with schleem.
thingiverse
free
Basic calibration print by kwaaaa
...erse
test print for calibrating tolerances for precise parts.
round and square extrusions in 1.0mm to 4.0mm in 0.5mm increments.
thingiverse
free
IKEA MALM Desk slide mechanism by kwaaaa
...ikea malm desk slide mechanism by kwaaaa
thingiverse
replacement part for ikea malm computer desk slide out table.
thingiverse
free
PVC Filament Spool Rack by kwaaaa
... only requires two pvc pipes (1/2" and a 3/4") and some ca glue or a soldering/burning iron to weld the parts together.
thingiverse
free
SCX-200 GoPro/Xiaomi Camera Mount by kwaaaa
...ggressive gopro or xiaomi yi camera mount for the space cowboy scx-200 quadcopter frame, directly mounted by the top plate bolts.
thingiverse
free
Plumbus by kwaaaa (Base angle fixed) by taco_man
...el, except i opened up the stl for the bottom part of the base and rotated it 1.625 degrees so it would print properly in slic3r.
thingiverse
free
OneWheel miniature model by kwaaaa
...s an axle.
bearing = optional
print two of each file and glue it together with ca glue. put a piece of grip tape on, cuz to size.
thingiverse
free
RunCam PZ0420M adapter for HS1177 hole mounting by kwaaaa
...unt it on a quad whose frame has mounting holes for an hs1177 cam, this adapter will allow you to mount your runcam in that hole.
thingiverse
free
30 and 45 degree angle FPV racing 600tvl mount by kwaaaa
...e
this is a 30 degree angle camera mount for aggressive fpv racing. for fatshark 600tvl cmos cams, please check my other upload.
thingiverse
free
600tvl cmos cam FPV 30 degree racing mount by kwaaaa
...aaa
thingiverse
600tvl cmos camera mount for fpv racing. it's made with a 30 degree tilt angle for very fast forward racing.
Fatshark
thingiverse
free
Fatshark Diopter Case
...hingiverse
i bought custom diopters for my fatsharks and no longer need the fatshark diopters. this is a case just to hold them.
thingiverse
free
Fatshark 922 by gumush
...fatshark 922 by gumush
thingiverse
fatshark 922 new shell project
thingiverse
free
Fatshark Joystick cap
...fatshark joystick cap
thingiverse
fatshark button cap to prevent accidental pushed on the left joystick.
thingiverse
free
fan block Fatshark by DarylBike
...fan block fatshark by darylbike
thingiverse
fan block fatshark
thingiverse
free
Fatshark camera mount by Brick85
...fatshark camera mount by brick85
thingiverse
mount for fatshark 700tvl with dampers.
thingiverse
free
Battery Holder for Fatshark
...ingiverse
this is a part that can be put around a battery in the fatshark strap so that the battery will not slip out that easy.
thingiverse
free
Box battery Fatshark by DarylBike
...box battery fatshark by darylbike
thingiverse
support batterie pour lunette fatshark
thingiverse
free
Fatshark 18650 Case by Drifter_uk
...fatshark 18650 case by drifter_uk
thingiverse
18650 battery case to fit fatshark goggles
thingiverse
free
Pilot HD fatshark by rcoxey
...pilot hd fatshark by rcoxey
thingiverse
scann of pilot hdf camera from fatshark
thingiverse
free
Camera housing fatshark by nimic
...camera housing fatshark by nimic
thingiverse
a camera housing for fpv camera from fatshark
Lipo
thingiverse
free
Soporte lipo
...soporte lipo
thingiverse
customizable lipo stand
thingiverse
free
Copterframe Lipo Adapter for bigger Lipos by heckmic
...o adapter for bigger lipos by heckmic
thingiverse
copterframe lipo adapter for bigger lipos
look at michael-heck.net for more.
thingiverse
free
Testeur LIPO / LIPO Tester
...testeur lipo / lipo tester
thingiverse
salut a tous ceux qui sont sur cette page !
thingiverse
free
Lipo Taranis
...lipo taranis
thingiverse
pour lipo gn3 taranis
thingiverse
free
Harvest lipo buckle
...harvest lipo buckle
thingiverse
tpu lipo belt. keep out the frame your lipo straps.
thingiverse
free
lipo box by snoupypop
...lipo box by snoupypop
thingiverse
pour lipo 25c 1s
thingiverse
free
Lipo Stand by Cagatay
...lipo stand by cagatay
thingiverse
6x (12x35mm) lipo compartment
thingiverse
free
Lipo cover for bottom slung lipos by Zugara
...s and battery strap width of 20mm. length of 75mm x 30mm wide, 17mm height.
stl is for hollow print, so adjust yours accordingly.
thingiverse
free
boite lipo by micma
...boite lipo by micma
thingiverse
boite pour accu lipo tattu 850mha
thingiverse
free
LiPo Holder for Taranis
... taranis
thingiverse
this is my lipo holder for taranis radios. i use it with 850 mah lipo's, but others may also work fine.
Mod
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.