Thingiverse
Fan Filtering Unit
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a fan filtering unit for use on any printer enclosure.
It's designed to use in combination with the Nilfisk AirCare HEPA filter and a 92x92mm fan.
I added it to the
Prusa Printer Enclosure V2..
Size: 145*134mm, about 60mm deep when using a 25mm fan.
You will need:
4x M4x35mm screw
4x M4x20mm screw (for mount on a 3mm Acrylic sheet, adjust to your needs.)
8x M4 nut
1x 92x92mm fan. (I used a 230VAC unit running on the mains of the printer in combination with a temperature controller and a SSR)
1x Nilfisk HEPA filter (GM 200 - 499 series)
1x Universal carbon filter for kitchen hood, cuttable. (optional)
You can use the FFU_Grid_DrillAssist part to mark the cut out on the desired location.
After marking your filter cut out and drill holes remove the 4 corners from the model using a snap-off knife.
It's designed to use in combination with the Nilfisk AirCare HEPA filter and a 92x92mm fan.
I added it to the
Prusa Printer Enclosure V2..
Size: 145*134mm, about 60mm deep when using a 25mm fan.
You will need:
4x M4x35mm screw
4x M4x20mm screw (for mount on a 3mm Acrylic sheet, adjust to your needs.)
8x M4 nut
1x 92x92mm fan. (I used a 230VAC unit running on the mains of the printer in combination with a temperature controller and a SSR)
1x Nilfisk HEPA filter (GM 200 - 499 series)
1x Universal carbon filter for kitchen hood, cuttable. (optional)
You can use the FFU_Grid_DrillAssist part to mark the cut out on the desired location.
After marking your filter cut out and drill holes remove the 4 corners from the model using a snap-off knife.
Similar models
thingiverse
free
Air Filter for LACK Enclosure by danailch
...)
8x - wood screws
to be added next:
a housing for the carbon filter (the filter can be used without it).
the size of the screws.
thingiverse
free
HEPA Filter Enclosure by jmccluskey
...replacement filter, part # lv-h132-rf (on amazon)
fan: ac infinity axial 1238 w/ ac infinity, fan speed controller. (on amazon)
thingiverse
free
Ultima Air HEPA Filter by Bolerro
...nt and finish up.
please also check out my lack enclosure - complete setup
as well as my other things i've created - bolerro
thingiverse
free
Hepa+carbon duux filter holder
...osure on the inside i installed the filter and on the outside i installed a 80mm 24v fan attached to a temperature control board.
thingiverse
free
HEPA Air Filter Mount by shortround1911
...d here
while i have printed this design i have not yet tested it as an air filter. i'm still completing my printer enclosure.
thingiverse
free
Visit trap-Filter/ventilation in Plexiglass for IkeHack Lack Enclosure
...iding trap is made for 3 or 4 mm plexi.
enjoy easy things.
thingiverse
free
Self Contained HEPA + Carbon Filter by Luka718
...within the enclosure to print and test this filter. any and updates will be noted here until it's final revision.
thank you,
thingiverse
free
HEPA + Active Carbon Filter for 3D Printer Housing by JKSniper
...pressure fan, such as scythe grand flex pwm or similar :) it should fit on 3mm wall or thicker...
thingiverse
free
Hepa Filter for 3d printer by dvilleneuve
...ust add 2 x 120mm fan and a hepa vilter for ivahap100 and you have a particule and odor filter to printer abs on your 3dprinter !
grabcad
free
Printer Air Filter Box
...s. the combination of a hepa filter and a charcoal filter should help clean up abs and other print materials that tend to out-gas
Filtering
3d_export
$10
cartridge filter
...cartridge filter
3dexport
cartridge filter
3d_export
$6
Bag filter
...bag filter
3dexport
bag filter
3d_export
$10
of dust filter
...of dust filter
3dexport
3d model of dust filter
3d_export
$10
of bag filter
...of bag filter
3dexport
3d model of bag filter
3d_export
$7
of bag filter
...of bag filter
3dexport
3d model of bag filter
turbosquid
$20
Filter
...ty free 3d model filter for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1512887)
3d_export
$10
bag filter
...of textile filter cloth or non-woven felt, and the filtering effect of fiber fabric is used to filter the...
3ddd
$1
UFI Filter
...ufi filter
3ddd
фильтр , ufi
ufi oil filter
turbosquid
$30
Filter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
filters
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
Unit
turbosquid
$4
UNIT
...unit
turbosquid
royalty free 3d model unit for download as on turbosquid: 3d models for games, architecture, videos. (1196686)
archibase_planet
free
Unit
...unit
archibase planet
desk board
entertainment unit 02 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
control unit
...control unit
3dexport
control unit
3ddd
$1
bathroom unit
...bathroom unit
3ddd
bathroom unit
3ddd
$1
Crockery unit
...crockery unit
3ddd
сервант
crockery unit
3ddd
$1
Process unit
...process unit
3ddd
статуэтка
process unit
3d_export
$5
united nations
...united nations
3dexport
united nations-logo -cnc plant
turbosquid
$3
TV unit-1 / 2 unit
...-1 / 2 unit for download as 3ds, max, obj, fbx, dwg, and dae on turbosquid: 3d models for games, architecture, videos. (1207609)
3d_export
$5
tv unit
...tv unit
3dexport
the tv unit design simple design with texture for interior
3d_ocean
$5
Tv Unit
...gh quality apple tv unit. the model is made using 3ds max. hope you enjoy it and if you have any queries feel free to contact me.