Thingiverse
Enclosure for WeMos Clone With LCD and 18650 by Atiesh
by Thingiverse
Last crawled date: 3 years, 1 month ago
Full Enclosure for WeMos Clone With LCD and 18650 battery.
Print body. (bottom down)
Print battery cover angled on corner (rotate it)
Pint face. (face down)
Print switch, 4x nails and joystick cap.
Insert PCB with switch, secure it with 4x nails (or screws if you have 1.6mm screws)
Glue face to body
Insert joystick with litle amound of glue... and try to align before glue is dry.
Insert battery and close cover.
Profit!
Print body. (bottom down)
Print battery cover angled on corner (rotate it)
Pint face. (face down)
Print switch, 4x nails and joystick cap.
Insert PCB with switch, secure it with 4x nails (or screws if you have 1.6mm screws)
Glue face to body
Insert joystick with litle amound of glue... and try to align before glue is dry.
Insert battery and close cover.
Profit!
Similar models
thingiverse
free
WeMos D1 18650 enclosure by gguuss
...wemos d1 18650 enclosure by gguuss
thingiverse
this is an enclosure that fits around the wemos d1 with the 18650 battery.
grabcad
free
Wemos ESP8266 18650 module
...sed on backside picture and some measurements.
based on: https://grabcad.com/library/wemos-18650-battery-shield-v3-1 (thank you)
thingiverse
free
Particulate Matter SMOG Sensor frame for Wemos ESP8266 PMS7003 by Szmalu
... shield
wemos battery shield
wemos proto shield
oled i2c (128x64)
1x kcd11 rocker switch
1x 18650 battery
1x 18650 battery holder
thingiverse
free
Wemo Switch UK Backplate by charliepsycho
... switch, screw the wemo switch to the print, wire it all up then screw the print to the back-box and snap the wemo cover on top.
thingiverse
free
Caving battery box for 4x 18650 by Michael_Sargent
...d and body can be held together with m6 bolts, as the holes are 6mm bore. the horizontal holes are for helmet mounting, 4mm bore.
grabcad
free
18650 Battery Holder 2x
...ery holder 2x
grabcad
18650 battery holder 2x version
based on 4x from hvg
https://grabcad.com/library/18650-battery-holder-4x-1
thingiverse
free
Child Proof Light Switch by torax82
...other.
installation: remove screws on existing cover, place printed part on the switch face aligning the holes. re-insert screws.
thingiverse
free
Wemos 18650 v3, v8, v9 Powerbank / Battery Shield Case by h0sch180
...find more of my things here:https://www.thingiverse.com/h0sch180/designs
or on github:https://github.com/h0sch180/3d_print_things
thingiverse
free
Wemos Battery Box Cover (for rocker switch)
...ry controller and wemos and connected the switch in between.
the small hole is for mounting a ws2812b led with a small round pcb.
thingiverse
free
ESP32 Marauder Enclosure
...p32 marauder can be found here at this github repo or in this youtube video. please feel free to voice any questions or concerns.
Atiesh
thingiverse
free
Bottle hook by Atiesh
...bottle hook by atiesh
thingiverse
simple hook for selgros/ikea bottle.
print.
screw to wall.
thingiverse
free
Mini containers by Atiesh
... of mini containers.
all 8x8xxx mm.
i use to organize mini drill bits.
p.s. inspired by https://www.thingiverse.com/thing:1345659
thingiverse
free
Model - SOD323 Package by Atiesh
...d323 package by atiesh
thingiverse
model - sot323 ic package
dimension - 1,8mm x 1,35mm
for modelling purposes not for printing!
thingiverse
free
Model - NCR18650 Battery by Atiesh
...y by atiesh
thingiverse
model - panasonic ncr18650 battery
dimension - 18,4mm x 65,5mm
for modelling purposes not for printing!
thingiverse
free
Model - Syringe flux by Atiesh
...syringe flux by atiesh
thingiverse
model - syringe flux.
body dimension - 19mm x 91,4mm
for modelling purposes not for printing!
thingiverse
free
Model - Spool of solder by Atiesh
...of solder by atiesh
thingiverse
simple model - spool of solder.
dimension - 60mm x 55mm
for modelling purposes not for printing!
thingiverse
free
Model - 8P4R-0603x4 by Atiesh
...r-0603x4 by atiesh
thingiverse
model - 8p4r-0603x4 package
dimension - 3,26mm x 12,6mm
for modelling purposes not for printing!
thingiverse
free
Model - Encoder PEC16 by Atiesh
... - encoder pec16 by atiesh
thingiverse
model - encoder pec16
dimension - 16 x 17,6 x 26
for modelling purposes not for printing!
thingiverse
free
Extruder cable holder by Atiesh
...ruder cable holder by atiesh
thingiverse
extruder cable holder for tronxy p802ma.
print
screw to head (see picture)
ziptie cable
thingiverse
free
Model - Screwdriver Bit 4mm by Atiesh
...model - screwdriver bit 4mm by atiesh
thingiverse
model - screwdriver bit 4mm
for modelling purposes not for printing!
Wemos
thingiverse
free
wemos by hrubak
...wemos by hrubak
thingiverse
wemos
thingiverse
free
WeMos Ziptie by gguuss
...wemos ziptie by gguuss
thingiverse
this is a tiny enclosure for holding the wemos d1 and r2 mini.
thingiverse
free
Wemos ESP32 Case by 3dprtr
... for a bluetooth tracker for me home automation. the wemos esp32 below is the one that i am using for this design.
wemos esp32.
thingiverse
free
Case for esp8266 WeMos by Apkawa
...case for esp8266 wemos by apkawa
thingiverse
case for esp8266 wemos with pins holder.
thingiverse
free
Wemos D1 enclosure by edelneo
...wemos d1 enclosure by edelneo
thingiverse
this is an enclosure for a wemos d1 mini and the relay shield.
thingiverse
free
Wemos D1 stack by hhravn
...wemos d1 stack by hhravn
thingiverse
a wemos d1 stack, remixed to allow adjustment of usb height.
thingiverse
free
Wemos frame holder
...s board.
the ornaments in the backplane are just to save filament and get some ventilation.
second one is with cuts for the plug.
thingiverse
free
Wemos D1 & Breadboard by doughy2002
...wemos d1 & breadboard by doughy2002
thingiverse
remixed this from a wemos holder as i needed one with a breadboard
thingiverse
free
Wemos Cube Lamp
...onnected to home assistant https://www.home-assistant.io/ for control.
i've also added the template i'm using in esphome.
thingiverse
free
Wemos case with OLED by mikbund
...en the display and the wemos board to avoid glue.
the oled holder was downloadet from thingiverse (will update with link later).
18650
3d_export
$10
battery 18650
...battery 18650
3dexport
battery 18650
turbosquid
$10
18650 Li-ion Battery
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
lithium ion 18650 battery
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
3d_export
$10
18650 lithium battery
...your software before making a purchase is highly recommend. -in case of problems with the 3d model, do not hesitate to contact me
3d_export
free
solar rechargeable single led flashing light
...light 3dexport unit was design for housing a single 18650 lithium-ion battery and mini solar panel 55mm x 41mm-...
3d_export
$12
Emoji 042 Loudly Crying With Tears
...spec/gloss textures<br>- blend (cycles): metal/roughnes textures<br>geometry:<br>- units: centimeters<br>- polygons: 18650lt;br>- vertex: 18822<br>- triangles: 2<br>- quads: 18648<br>- ngons: 0<br>- vertex...
thingiverse
free
18650
...18650
thingiverse
18650 power supply, vase mode
thingiverse
free
18650 CASE
...18650 case
thingiverse
18650 case!
thingiverse
free
18650 holder
...18650 holder
thingiverse
18650 holder
thingiverse
free
18650 dispenser
...18650 dispenser
thingiverse
18650 dispenser for 10 batteries.
Lcd
turbosquid
$20
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Noti Lcd Sofa
...noti lcd sofa
3ddd
noti , lcd
3d model of noti lcd sofa
3d_ocean
$7
Lcd tube wall
...hrome electronic electronic lcd tv videowall
lcd tube wall you can put in the lcd your own texture or movie in it and animate it.
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Clone
3d_export
$5
Clones great republic
...clones great republic
3dexport
clones great republic.those same clones from the star wars movie universe.4 clones available.
3d_export
$10
Clone 3D Model
...clone 3d model
3dexport
clone woman girl female lady chamber sci fi
clone 3d model calcm1 51695 3dexport
turbosquid
$5
Clone machine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Clone trooper 3D Model
...nd army soldier trooper
clone trooper 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
Lego Clone Walker
...ree 3d model lego sw clone walker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1292252)
turbosquid
$15
Clone trooper helmet
...d model clone trooper helmet for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1199355)
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$35
Surface Clone C4D materials
...+ of the most well made materials for maxon’s cinema 4d; on the internet today. each material is crafted with a specific purpo...
turbosquid
$3
Sci-fi cloning vats
...cloning vats for download as 3ds, obj, wrl, x, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290168)