Electronic Building System V2 by wolle57

Last crawled date: 3 years, 1 month ago

Join the EBS Group
http://www.thingiverse.com/groups/ebs-electronic-building-system
and you are allways up to date with all news, assembling-tipps updates and new parts.
Update 28.Nov.2016
Planning your own circuits for EBS
Building with EBS sometimes needs a little bit planning.
To do this, i made a library for TinyCAD. Now you can make a detailed Plan for the modules and how to make the connections, before you (or another person) puts the Modules together and does the wiring.
You must have installed TinyCad, whitch is free software. Download and save the EBS-Library to your PC. Add the library to TinyCad and you'r done.
In case of new modules and updates the newest library (EBS.TCLib) can allways be downloaded here.
Attention: You need TinyCAD, NOT Tinker-CAD!
'Silent' Update 27.Nov.2016
For module 'BlockBat' i found out, it's best to glue the batteryclip to the ground and click the battery on it with the contacts down. So you need 2 holes for the wires of the clip. These are done with this little update of the scad-files.
Update 26.Nov.2016
For my printouts, i had to do much work after printing to get good fitting parts, becaus my printer is not very exact.
So i put here a second OpenSCAD file, which produces modules with higher tolerances.
Low tolerances: US_BK_Schaltung-K.scad
High torerances: US_BK_Schaltung-K2.scad
In case of new things are uploaded, allways bozh of the files you will find updated here.
Remark: The downloadable stl-files for EBS, are allways produced with the low-tolerance-scad-file.
So, if you want high-tolerance-modules, you must use the scad-file. Give it a try. It's not complicated, but very intuitive. And, of course, OpenSCAD is free.
Update 23.Nov.2016:
New Part integrated: Poti
SCAD-File changed to latest state.
You can complete your already downloaded source file with "Modul-Poti.txt" or download the completed source-file. Also here is the new stl-file: US_BK-K-Poti.stl.
Update 22.Nov.2016:
New Part integrated: Kondensator
SCAD-File changed to latest state.
You can complete your already downloaded source file with "Modul-Kondensator.txt" or download the completed source-file. Also here is the new stl-file: US_BK-K-Kondensator.stl.
Update 21.Nov.2016:
New Part integrated: Dil 8 - IC's
SCAD-File changed to latest state.
You can complete your already downloaded source file with "Modul-Dil8.txt" or download the completed source-file. Also here is the new stl-file: US_BK-K-Dil8.stl.
Welcome
to my brand new 2nd version of the Electronic Building System.
Using this system, you can build circuits, strongly based to a circuit-diagram.
Good built, the function and wireing of the circuit is much more obvious, the overview so much better, than in a circuit, built on a common breadboard. This is very important for children and beginners!
The advantage of a common breadboard, the simple contacting, is , of course, fully taken over to this system!
Approvements to old system:
Better and stronger fitting
Contact-System is very easy and works great, and, of course, without any soldering.
Klick on Post-Printing for details
Will soon be continued with new parts as DIL8 for NE555 or OpAmp, with Spools, Potis,
78xx, variable capacitor, ... Let's build a little Radio, a transmitter (with very little power),
to hear your music in the radio next room, some blinking LED's, and much more...
The web is full with tons of educational and fascinating circuit diagrams, electronic parts are fairly cheap. Have fun... There are almost no limits, using this system.
All published data are denied for any commercial use!
You can print and edit all data for privat use only.
The old system (http://www.thingiverse.com/thing:1885504) will not be continued (but also not deleted)! Parts of old and new system are NOT compatible!
The contact-system and the way to assemble a block is described in Post-Printing.