electric grill skewer (elektrischer Grillspieß/ Hähnchenspieß) by Naestrahan

Last crawled date: 3 years, 4 months ago

It's a electrical grill skewer for making chicken or roasted meat on a grill/ BBQ!
All you need for this is descipted below.
UPDATE (01.2021):
Now there is a Link for a Motor that should fit and work!
The grill skewer can be mounted on plates up to 18mm thick. For thicker panels I have created an alternative "Stangehalter" to which you can mount your own holder
there are new optimized versions of "Stangenhalter" and "Arretierung"
for the gearbox you need:
3d printed:
1x Gehäuse_Teil1
1x Gehäuse_Teil 2
1x Blechhalter
1x Halteklammer (for mounting on plates with a thickness of max. 18mm)
1x Antriebsritzel (for best result use a smaller Nozzle d=0,15mm and 100% infill)
1x Stufe 1 (for best result use a smaller Nozzle d=0,15mm and 100% infill)
1x Stufe 2 (for best result use a smaller Nozzle d=0,15mm and 100% infill)
1x Stufe 3 (for best result use a smaller Nozzle d=0,15mm and 100% infill)
1x Letztes Zahnrad (for best result use a smaller Nozzle d=0,15mm, support and 100%
infill)
all of the three "Abstandshülse" (see picture for where to use)
bought:
1x aluminium sheet 3mm (see drawing for dimensions)
3x aluminium or steel rod 6x32
6x cylindric head screw M4x45 (or longer)
2x cylindric head screw M4x30
2x screw nut M4
2x screw M6x30
2x screw nut M6
2x bearing 61800-ZZ-MAE (10x19x5)
1x electrical motor for rc cars type 540 with low rotational speed around 5800 U/min (for example: https://amzn.to/2X5CTrL or https://bit.ly/38QNjkA )
Note: You can change the rotational speed of the motor by lower or higher the voltage!
3x AA battery with battery pack
for the skewer you need:
3d printed:
2x Adapterstück Grillspieß (support + 100% infill)
bought:
1x square tube stainless steel 10x10x1mm (lenght: you have to measure for your BBQ)
2x Nut M16
6x Rod M6 x 140mm
2x wing-screw M4
Thread drill M4 and M6
for the skewer holder you need:
3d printed:
1x Stangenhalter (or "Stangenhalter_alternativ" for plates thicker than 18mm!)
1x Arretierung
1x Lagerinlay (100% infill)
bought:
1x screw M6x30
1x screw nut M6
1x screw M4x45
1x bearing 61800-ZZ-MAE (10x19x5)