Double 1u server stand (vertical)

Last crawled date: 4 years, 4 months ago

Why
Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise.
Also includes a little spacer for the top of the servers.
It works fine for me, but use at your own risk.
Features
No supports needed
Holds 2 standard 1u (1.75"/44.45mm) size servers, vertically
200mm maximum width, should fit most printers
Instructions
.25mm layer height is fine
No supports needed
Print on its side for better strength
Use a minimum of 3 or 4 walls and 10% infill
Open Source
As always the original design file (fusion360 + STEP) is included, so feel free to improve it (or learn from it)!