3DWarehouse
BoominatorMINI
by 3DWarehouse
Last crawled date: 1 year ago
Woofer: Aura NS6-255-8A Tweeter: Dayton ND16FA-6 Mind the gap between the magnets and center bracing. It's 3-4mm depending on grill used. Either a)Insert an appropriately sized piece of plywood or masonite between the magnets, or b) use a thick sealing gasket (for sealing doors/windows) between the baffles and grill/speaker. Center bracing uses 61mm holes cut by hole drill evenly spaced in both directions. Holes can be smaller or larger to fit available tools. Recommended hole size is 54 to 62mm.
Similar models
thingiverse
free
mpsm side panel with extra mounting screw by tekhertz
... extra mounting screw by tekhertz
thingiverse
mpsm side panel with portal fan grill and screw hole for bottom brace for use with
thingiverse
free
Moai Low Poly Magnet
...s, one with magnet hole on top and one with magnet hole on bottom.
magnets size i use is 7.9mm in diameter and thickness is 0.8mm
thingiverse
free
Wanhao Duplicator 4 Build Plate leveler by Raggen7
...ith a digital device
holes for magnet size 16mm x 2mm to keep jig on place, no contact between magnet and steel, slides very easy
thingiverse
free
E16 Proto-Chassis Center Brace for shocks by TiedToMemory
...hassis i've been working on. shocks mount to the bottom holes through the chassis holes and the top hole is for more support.
thingiverse
free
Morimoto HID Igniter Seal adapter by Zepticon
...niter and a rubber end cap on your hid conversion.
the cutout is used to make a perfect hole in the rubber end cap you are using.
thingiverse
free
anet a8 rear Y brace by sammance
...anet a8 rear y brace by sammance
thingiverse
non bolt in support brace between rear and center under belt. notch for wires
thingiverse
free
Speaker grill by Bustenchops
...es. it is in 2 parts due to the size of the grill. print both parts and the holes in the middle of the sides will line things up.
thingiverse
free
Axial Capra Servo Winch Mount by SILVERADORED
...ng holes and the holes for the front chassis brace. you will need to cut the cross brace off of the grill in order for it to fit.
thingiverse
free
120mm Fan Grill N7 (Mass Effect) by mistertech
...at i came up with. it's fairly basic but looks nice.
it's 105mm between the mounting holes (center to center). 3mm thick.
thingiverse
free
Friends peep hole cover magnet (remix) by Kain567
... magnets, one is for wallet sized pics and 6x2 mm magnets, the other is sized for 4x6 pics with holes for 6x2mm or 8x2mm magnets.