Artillery Sidewinder x1 - Z wobble torture test - height 400mm by pappl

Last crawled date: 3 years, 4 months ago

This is a remix of PaoloTrianni's Z-wobble test.
See: https://www.thingiverse.com/thing:4571772
Added a square base plate to avoid breaking off the bed.
Else the tube is hollow after 2cm of height.
Summary
A hardcore test for the Artillery Sidewinder x1 Z-wobble and the height wobble.
This tube is so thin and tall, it will always get shifted layers because of nozzle touching it. The tube is very flexible on top, but you can see if changes to the setup (Slicer/Hardware) make it better.
The layers aren't straight on top of the tube, in my case it's because the very thin tube starts to wobble because of too high travel and print speed.
The nozzle sticks a little on the tube and makes the tube swing at layer change. So in my case it is slicer settings, but may also result of Z-axis wobble due to fast changing Y-axis movement -> see Z-axis support mod.