Anet A8 double power supply cover by rumbero71

Last crawled date: 3 years, 1 month ago

I liked the original design quite much. However, in order to finalize this upgrade:http://www.thingiverse.com/thing:2220401
I wanted to have the following:
-A second power supply, because the original one seemed a bit whacky to add more load
-Power to both supplies should be switched with only one switch
-No mains cables running around the frame
By placing a small 5V2A LED power supply next to the original one, I solved all three things. For that I enlarged the original case (now it stands flat on the surface). The original flaw of the lack of a mount on the left side remains, so I just used this designhttp://www.thingiverse.com/thing:2087889
and fixed it with two 3mm self-threading screws.
Design was quick and dirty so expect some (or more) imprecision.
0.2mm in PLA witha .4mm nozzle did work quite well on this one.